Construction of 8 Nos. of INS, 20 Nos. of SI and 97 Nos. of PC/HC Quarters at Pollachi in Coimbatore District (Group-I).

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

37.1 : White washing 3 coat (slaked)

39 : S & F of M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.3 : Supply and planting avenue trees

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

Electrical arrangements 69 : 16 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

78 : Earthing Station IS3043 (Type I)

86 : Anti termite treatment

ANNEXURE-I 2.1.1 : Supplying and filling with Gravel

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm in Foundation and Basement

8.3.1.1 : Standardised concrete Mix M30 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Ground Floor

c) In First Floor.

d) In Second Floor.

e) In Third Floor.

f) In Fourth Floor.

g) In Fifth Floor.

h) In Sixth Floor.

i) In Seventh Floor.

j) In Eighth Floor.

k) In Nineth Floor.

l) In Tenth Floor.

m) In Eleventh Floor.

9.2.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor.

f.In Fifth Floor.

g. In Sixth Floor.

h. In Seventh floor

i. In Eighth floor

j. In Nineth floor

k. In Tenth floor

l. In Eleventh floor

10.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors b. In Stilt / Ground Floor

c. In First Floor

d. In Second Floor

e. In Third Floor

f. In Fourth Floor.

g. In Fifth Floor.

h In Sixth Floor.

i. In Seventh floor

j. In Eighth floor

k. In Nineth floor

l. In Tenth floor

m. In Eleventh floor

11.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor.

f. In Fifth Floor.

g. In Sixth Floor.

h. In Seventh floor

i. In Eighth floor

j. In Nineth floor

k. In Tenth floor

12.1.1 : Brick partition work in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick (using crushed stone sand) with Admixture a. In Ground floor

b. In First floor

c. In Second floor

d. In Third floor

e. In Fourth floor

f. In Fifth floor

g. In Sixth floor

h. In Seventh floor

i. In Eighth floor

j. In Nineth floor

k. In Tenth floor

14.1.1.I : Precast Cupboard slab 20mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Stilt / Ground floor

b. In First floor

c. In Second floor

d. In Third floor

e. In Fourth floor

f. In Fifth floor

g. In Sixth floor

h. In Seventh floor

i. In Eighth floor

j. In Nineth floor

k. In Tenth floor

14.1.1.II : Precast cupboard slab 40mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Stilt / Ground floor

b. In First floor

c. In Second floor

d. In Third floor

e. In Fourth floor

f. In Fifth floor

g. In Sixth floor

h. In Seventh floor

i. In Eighth floor

j. In Nineth floor

k. In Tenth floor

14.1.2.II : Precast cupboard slab 40mm tk using standardised concrete mix M30 grade.(using crushed stone sand) a. In Foundation & basement

16.1.2 : Precast Jally Ventilator 50mm thick.Using standardised M20 grade concrete Mix. (using crushed stone sand) a. In Ground Floor

b. In First Floor

c. In Second floor

d. In Third floor

e. In Fourth floor

f. In Fifth floor

g. In Sixth floor

h. In Seventh floor

i. In Eighth floor

j. In Nineth floor

k. In Tenth floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d. For Vertical wall

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.6.1.1 : R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using standardised concrete mix M30 grade. (using crushed stone sand) a. 900 x 2100mm

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

23.1.1 : TW styles & rails with 9mm thick BWR single leaf shutters with brass screws a. 750 x 2100 mm

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) including plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) using plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Plastic Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1: Rain water harvesting using defunct borewell and providing perforated cover slab (M30) a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4: Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.5.1 : Gully Trap using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1 : PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

b. 160 mm dia PVC bend

62.2.2 : PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal tee

b. 160 mm dia PVC Equal tee

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

71.2 : Supplying and fixing of 32 AMPS Triple pole main switch.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.8 : Run of 4 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

87.1: Supplying and delivery of Three phase ELCB/RCCB

98.3.1 : TW panelled door shutter (with brass fittings) a. 1000 x 2100mm. (Single leaf)

112.1 : S&F of 225 mm dia sweep AC exhaust fan

344.2 : S&F of Bevelled edge mirror 600 x 450 x 5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

379.4.2.2 : Supply and fixing of superfine polished with machine cut edges (Synthetic Grey, Paradise and similar varieties) of size 4' x 2' of Granite slab 18 to 20mm thick laid over in CM 1:3 (using crushed stone sand)

379.5.1 : S&F of Granite tile of size 2'x1', 10mm thick for Kitchen arrangements (jet black) (using crushed stone sand) a.In Ground floor

b.In First floor

c.In Second floor

d.In Third floor

e.In Fourth floor

f.In Fifth floor

g. In Sixth floor

h. In Seventh floor

i. In Eighth floor

j. In Nineth floor

k. In Tenth floor

383.1: Providing Single nosing to the edges of Granite slab

383.4.1 : S&F of stainless steel sink 600 x 600 x 200mm

448.2: Supply and fixing 32mm dia PVC Tee with end cap

ANNEXURE - II A1: Supplying and fixing of SFRC manhole Cover with frame of size 600mm x 600mm with locking arrangements including of all cost etc., all complete and as directed by the departmental officers.

A2: Supplying and fixing of SFRC manhole Cover with frame of size 900mm x 900mm with locking arrangements including of all cost etc., all complete and as directed by the departmental officers.

A3: Supply and Laying of Granite wall cladding (Satharlic Grey, Paradise and similar varieties) ) of 10mm thick in C.M 1:2 (using crushed stone sand) Including Cost of Materials, Labour charges etc

A4: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb for bulk head fittings

A5: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A6: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A7: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A8: Providng one coat of Wallputty for new plastered surface

A9: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free.

A10: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free.

A11: Supply & laying flooring tiles for colour stain free nano polish Tiles 600 x 600 x 8mm with 1st Quality homogeneous Full body tiles for flooring and other similar works in cement mortar 1:3 (one of cement and three of CS sand) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary pointing the joints with grout (Tile joint filler), curing, finishing etc.,

A12: Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., ROLLING SHUTTERS (WITH ISI MONOGRAM) a) Manually Operated (up to 8 sqm. Area)

A13: Run off mains with 4 wires of 10 Sqmm copper PVC insulated unsheathed single core 1.1KV cable wire contuinuous earth by means of 6 Sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable in fully concealed 19 mm / 20 mm dia rigid PVC conduit pipe heavy duty with ISI mark including cost of all materials, specials, etc., all complete.

A14: Supplying and fixing of Health faucet approved quality with ISI mark including cost of labour charge and etc., all complete and as directed by the departmental officers.

A15: Supplying and fixing of CP angle cock tap including cost of labour charge and etc., all complete and as directed by the departmental officers.

A16 : Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. i.63A 4P MCB - 1 no. ii.63A 4P 30MA RCCB/ELCB - 1 no. iii.63A DP MCB Isolator -3 nos. iv.6A to 32A SP MCB - 12 nos.

A17: Supplying and fixing of FRB Door with shutter

Lift: A18: Design, Supply, Delivery, Installation, Testing, and Commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 13 Persons / STAINLESS STEEL (1.5 mm) Car Cabin as per the following specifications Three phase EB power supply should be get from the TNEB for installation and testing etc for completion of work. (Stilt+10)

A19: Design, Supply, Delivery, Installation, Testing, and Commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 13 Persons / STAINLESS STEEL (1.5 mm) Car Cabin as per the following specifications Three phase EB power supply should be get from the TNEB for installation and testing etc for completion of work. (Stilt+5)

A20: Design, Supply, Delivery, Installation, Testing, and Commissioning of Servicer / Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 26 Persons/1768 Kgs with 11 Floors / 11 Stops / STAINLESS STEEL (1.5 mm) Car Cabin as per the Standrard specifications Three phase EB power supply should be get from the TNEB for installation and testing etc for completion of work . (Stilt+10)

Genset A21: Supply, erection, Testing and commissioning of 100 KVA generator with AMF Panel set.Insulation for the residential silencer (supply of residential silencer to be included under item for DG Sets).

Namakkal Constructions (BID ID -1238112)

P K SUBRAMANIAN CONSTRUCTION (BID ID -1221501)

S S Natarajan & Co (BID ID -1238144)

KUMARAN ASSOCIATES (BID ID -1232435)

S.R.CONSTRUCTION (BID ID -1239233)

JSR CONSTRUCTIONS (BID ID -1238689)