EI and fans for NMS 7th flr Telephone Bhavan, Saifabad

Amount

SUB HEAD-I: SITC OF FITTINGS AND FANS SITC of 36 watts recess type LED fitting of size 2' x 2' suitable for operation on 230volts, 50Hz, AC supply including providing chain arrangement for hanging the fitting etc., making good the damages done to the false ceiling, interconnections etc., as required. M/s Wipro Elate CRCO10 / SS model of Philips/CG /SS make. (BMS, and waiting longue)

SITC of 18watts recess type LED fitting of approx size 1'x1' suitable for operation on 230volts, 50Hz, AC supply including providing chain arrangement for hanging the fitting etc., making good the damages done to the false ceiling interconnections etc., as required. M/s Wipro Iris Slim Square LD81 / SS model of Philips/CG /SS make. (Conference hall, Bondada, explotation rooms)

SITC of 18watts surface type LED fitting of approx size 4' suitable for operation on 230volts, 50Hz, AC supply including fixing the same on the wall/ ceiling with clips/ screws, making good the damages done to the false ceiling providing interconnections etc., as required. M/s Wipro/ Philips/CG /SS make. (Above false ceiling, and office block rooms)

SITC of 9watts surface type LED fitting of approx size 2' suitable for operation on 230volts, 50Hz, AC supply including fixing the same on the wall/ ceiling with clips/ screws, making good the damages done to the false ceiling providing interconnections etc., as required. M/s Wipro/ Philips/CG /SS make. (lift shaft)

SITC of 6 watts circular recess LED fitting suitable for operation on 230volts, 50Hz AC supply, including providing interconnections, making good the damages done to the false ceiling etc., as required. M/s Wipro/ Philips/ CG/ SS make. (for emergency lights in case of power failure supply to be extended from UPS)

SITC of 9watts circular recess downlighter/ spot light LED fitting suitable for operation on 230volts, 50Hz AC supply, making good the damages done to the false ceiling etc., as required. M/s Wipro/ Philips/ CG/ SS make. (for highlighting scenery in NMS, Conference hall, waiting longue)

Supplying and fixing of decorative surface type LED fitting of 18watts, square type suitable for operation on 230volts AC supply including providing interconnections etc as required. Make M/s Wipro/CG/ Philips or similar superior make. (near lift lobby & Corridor)

Supplying and fixing of recess type LED fitting of 15watts, square slim type panel of size 168mm x 168mm suitable for operation on 230volts AC supply including providing interconnections etc as required. Make M/s Wipro/CG/ Philips or similar superior make. (corridor adjecent to data center)

Supplying and fixing of 9watts LED type fitting of length 12", suitable for operation on 230volts AC supply, including providing interconnections etc as requed. Make M/s Wipro/ CG/ Philips or simillar superior make. (for washrooms, mirror lights, WC)

Supplying and fixing of 48" sweep 28W BLDC Ceiling Fan with remote suitable for operation on 240V, 50Hz AC supply including interconnection, testing etc., as reqd. (M/s Atomberg or ss make)

Supplying, Installation, Testing and commissioning of heavy duty exhaust fan of size 9" dia metal blades, suitable for operation on 230Volts 50Hz, AC supply including providing interconnections etc., as required. M/s Almonard/CG or ss make

SH-II, (WIRING FOR LIGHTS POINTS AND CONNECTED WORKS) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (cafteria, AC plant room, office equipment room, office rooms GM, DGM, AGM, SDE, NMS room, conference hall, Bodanada, waiting longue, exploitation, power plant and battery, corridor {passage near server room, entrance longue, corridor near lift lobby, gents and ladies toilet.) a) Group C

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. (corridor near lift lobby). a) Group -C

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required a) 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire

b) 4 x 1.5 sq. mm + 2 x 1.5 sq. mm earth wire

c) 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire

d) 4 x 2.5 sq. mm + 2 x 2.5 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. a) 2 x 1.5 sq. mm

b) 3 x 1.5 sq. mm

c) 4 x 1.5 sq. mm

d) 6 x 1.5 sq. mm

e) 12 x 1.5 sq. mm

f) 3 x 2.5 sq. mm

g) 6 x 2.5 sq. mm

Supplying and fixing of following sizes of medium class PVC casing and capping along with accessories on wall surface etc., as required. a) 25 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm MS conduit

b) 32 mm MS conduit

c) 40 mm MS conduit

supplying and fixing of MS box on the existing cable tray of size 100mm x 100mm x 60mm deep along with 5A 4way wago connector, suitable for operation on 230volts AC supply, including providing interconnections, including cutting welding painting the box with red oxide and approved colour paint etc., as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 15/16 A modular socket outlet and 15/16 A modular indicator switch, connections etc. as required. M/s Anchor Roma or ss make

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection on the existing switch board etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI/ PVC box with modular plate and cover in front on surface or in recess, including providing and fixing 15/16 A modular socket outlet, connections etc. as required. M/s Anchor Roma or ss make

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2nos. 3 pin 5/6 amps modular socket outlets and 2nos. 5/6 amps modular switch, 1no. Indiacation lamp, connection etc. as required. (M/s Anchor Roma or ss make)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 1no. 15/16 A modular socket outlet, 1no. 15/16 A modular switch, connections etc. as required. (M/s Anchor Roma or ss make)

Supplying and fixing USB type mobile charging unit with 2No female output of 2A capacity, suitable for mounting on the existing modular plate including providing interconnections etc., as required.

Supplying and fixing suitable size GI/MS box with RJ 45 Female socekt (LAN socket) etc., as required (M/s D-Link or SS make)

Supplying and drawing CAT 6 4pair cable in the existing surface/ recessed steel/ PVC conduit/Al box section/work station cabinet as required. M/s D-Link or SS make

Supplying and fixing of 2mtr long patch card (ready made) for LAN network i/c interconnections, testing etc., as required. (M/s D-Link or SS make)

Supplying and fixing of 8 port LAN rack mount switch suitable for operation on 240V, 50Hz AC supply along with 8 port pacth panel for termination of CAT 6 cables including interconnections, testing etc., as reqd M/s D-Link or ss make

Supplying and fixing of 24 port LAN rack mount switch suitable for operation on 240V, 50Hz AC supply along with 24 port pacth panel for termination of CAT 6 cables including interconnections, testing etc., as reqd M/s D-Link or ss make

Supplying and fixing of 4 way (4+12), double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc., as required. (But without MCB/ RCCB /Isolator) M/s Legrand or ss make

Supplying and fixing of 8 way, double door, horizontal type Single Pole and Neutral, sheet steel, MCB distribution board, 230 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc., as required. (But without MCB/ RCCB /Isolator) M/s Legrand or ss make

Supplying and fixing of 12 way, double door, horizontal type Single Pole and Neutral, sheet steel, MCB distribution board, 230 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc., as required. (But without MCB/ RCCB /Isolator) M/s Legrand or ss make

Supplying and fixing 6 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 6A to 32 A Single pole M/s Legrand or ss make

b) 20A SP N MCB M/s Legrand or ss make

c) 32A SP N MCB M/s Legrand or ss make

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40 amps

b) 63 amps

Supplying and fixing following rating, three pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40 amps

b) 63 amps

Supplying and fixing of 3 pole contactors of AC3 rating of 9A and AC-15 rating of 4A suitable for operation on 230volts AC, 50Hz AC supply, along with auxiallary contacts, din rail for mounting the same in a suitable MS box, providing interconnections etc., as required

Supplying and fixing of adaptor box made of 16 SWG MS sheet including cutting welding painting with red oxide and approved colour powder coating, suitable to accommodate loop wires near DB, contactor etc., as required

Supplying and laying of GI Casing of size 100 x 50 mm including MS Cover including nuts, bolts, washers etc., as required.

SH: III (Public address system) Supplying and fixing chairman unit, Make Ahuja Model CMC 5100 or SS Make

Supplying and fixing delegate units, make Ahuja Model Model CMD 5200 or SS Make

Supplying and fixing wireless micro phones, Make Ahuja Model ABW 400 UH or SS Make

Supplying and fixing 2 core 1.5 sq.mm flexible transparent speaker cable, Make Finolex or SS Make

Supplying and fixing 25 mm PVC casing capping on conference table surface channel ISI Mark

Supplying and fixing central amplifier, Model CMA 5400 or SS Make

Supplying and fixing speakers 30 W, Make Ahuja Model ASX 312BT WT or SS Make

Supplying and fixing amplifier, Model SSB 120DP or SS Make

Supplying and Fixing of 17U Floor Standing Network Rack conforming to ISO standards made of powder coated steel with front glass door, Adjustable mounting depth, Power Distribution Unit, Fan module Mount on top cover, locking arrangement, 4 Nos Caster wheels (2 Nos with brakes) as required.

SH-V: Miscellaneous Items (Dismantling and Removal of old items) Removal of the existing false ceiling cable tray grid made of 50mm x 50mm x 6mm thick MS angle iron, 32mm x 6mm thick MS flat, all the joints are fixed with MS flat of same size, removal of the joints by dismantling the nuts and bolts, removal of MS down rod of length 1500mm and 12mm thick, removal of angle pieces from the wall which are provided as supports, removing all interconnecting nuts and bolts. (NMS room- 11.1x7.4, Conference hall - 8.4 x 7.5, Bondanda - 3.6 x 5.3)

Providing supports to the false ceiling grid with pulley, GI wires, fixing the recovered down rods after cutting and bending the rod to suit to new height, fixing the complete grid as it was touching the load bearing beam, fixing of the recovered MS angle pieces 9"on the wall with anchor fastners the height from the ceiling shall not exceed 650mm, making good all the damages done etc as required. (NMS room- 11.1x7.4, Conference hall - 8.4 x 7.5, Bondanda - 3.6 x 5.3)

Removal of old power supply cables, old MS angles, old fittngs, old MS conduits, old distribution boxes, fire panel, cables from the conference hall tables as per the instructions of Engineer in charge as per site conditions etc., as required.

Removal of old cable tray from the office room block removing the down rods holding the cables temporarly on the pully, ropes, GI wire, removing the down rods, shifting the same to the workshop cutting and bending the rods to suitable length, providing new nuts and washers etc, the cable tray along with cables shall be mounted up to the height not less than 1mtr from the ceiling etc as required

Providing of hooks in the ceiling by removing the rod, providing S hook and mounting the same in the ceiling, closing the opening making good the damages done to the ceiling etc as required.

AMBICA ELECTRICALS