COMPREHENSIVE MAINT/PETTY REPAIR OF INTERNAL ELECTRICAL COMPLAINTS IN OTM AT CANTT AREA UNDER GE (I) KANPUR

Amount

Attending complaints for checking and replacing the existing defective electrical items for continuous electric supply including carrying out minor repair as required to make the item functional and replacing fuse, small pieces of copper wire, copper cable as of suitable size at site, insulation tape roll etc.attending minor repair(s) such as testing, connections, fittings, nut, bolts, screws etc to emergent complaints i.e no light, earth leakage, short circfuit, neutral break in mains/sub mains/internal circuits of existing electrical system of main building /block and making continuous electric supply including carrying out minor repairs etc, required to make the system in order/functional with insulation tape roll,copper thimbles, glands, earthing wire as required at site complete all as specified and directed. Note:- This item is applicable only where no store is required. 1.The site for attending complaints are all inside OTM in Cantt. Contracor shall provide minimum two tradesmen (electrician) for each site with suitable tool box to attend the complaint in all working days . In case of no light the power will be ensured by connecting service wire from nearest LT Panel.2. Contractor shall ensure the security passes for his staff to be obtained from concern authority for attending complaints. 3. The contractor will ensure that the electricians with necessary tools bag shall always remain present at complaint cell to attend the complaints. 4. A recovery of Rs 500/- for not attending the compplaints upto 04 hours Rs 1000/- shall be recovered from the contractor 5. All the complaint slip, register & other connected document will be provided by the contractor without any extra cost. 6. Proper record (datewise) of complaints received & rectified by the contractor and the same may be askedfor verification at the time of payment of each RAR/Bill. 7. The above tradesmen shall not be utilize for the complaints where material is required and these complaints shall be measured and paid separately as S&F here in after.

Supply and fix in replacement cable PVC insulated unsheathed with flexible multistranded copper conductor of size 0.75 Sqmm single core complete all as specified and directed.

All as per item No 2 above but size 1.5 Sqmm complete all as specified and directed.

All as per item No 2 above but size 2.5 Sqmm complete all as specified and directed.

All as per item No 2 above but size 4 Sqmm complete all as specified and directed.

All as per item No 2 above but size 6 Sqmm complete all as specified and directed.

All as per item No 2 above but size 10 Sqmm complete all as specified and directed.

Supply & fix in replacement cord flexible PVC insulated and over all sheathed, 3 core, flexible copper conductor of size 0.75 sqmm, cut to size all as required at site complete all as specified and directed.

All as per item No 8 above but size 1.5 sqmm complete all as specified and directed.

M&L for switch piano flush button single pole one way 5 amps 240 volts complete all as specified and directed.

M&L Switch piano flush button single pole one way 15 amps 230 Volts complete all as specified and directed.

M&L for socket 5 amps 3 pin flush type, 230 volts complete all as specified and directed.

M&L for socket out let, 3 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts complete all as specified and directed.

M&L for bell push modular type 1 Module one way 6 amps 240 volts complete all as specified and directed.

M&L for bell push flush button single pole one way 5 amps 240 volts complete all as specified and directed.

M&L for switch modular type single pole one way 1 module 6 amps 240 volts complete all as specified and directed.

M&L Switch modular type one way 1 module 16 amps 230 Volts complete all as specified and directed.

M&L for socket 6 amps modular type 3 pin combined 2 module , 230 volts complete all as specified and directed.

M&L for socket modular type , 3 pin, 6 and 16 amps combined 2 module, 230 volts complete all as specified and directed.

Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed.

M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed.

S & F Lamp holder insulated body with back plate for dome batten fittings complete all as specified and directed.

M&L for bell 230 volts single pole complete all as specified and directed.

S & F in replacement modular white cover plate with frame 2 module all as specified and directed.

S & F in replacement modular white cover plate with frame 3 module all as specified and directed.

S & F in replacement of modular white cover plate with frame 4 module all as specified and directed.

S & F in replacement of modular white cover plate with frame 6 module all as specified and directed.

S & F in replacement of modular white cover plate with frame 8 module all as specified and directed.

S&F in replacement modular metal flush box 1/2 module all as specified & directed.

S&F in replacement modular metal flush box 3 module all as specified & directed.

S&F in replacement modular metal flush box 4 module all as specified & directed.

S&F in replacement modular metal flush box 6 module all as specified & directed.

Supply and fixing in replacement plug top 3 pin 16 amps AC 240 Volts complete all as specified and directed.

Supply and fixing in replacement plug top 3 pin 6 amps AC 240 Volts complete all as specified and directed.

Supply & fix in replacement hylem sheet cover 3mm thick of size 5''x5'' all as required at site including drilling holes for fixing screws and providing 4 Nos screws with washers for fixing the sheet to sunken box /wooden box all as required at site including drilling holes for fixing screws and providing 4 Nos screws with washers for fixing the sheet to sunken box /wooden box complete all as specified and directed.

All as per item No 35 above but of size 8"x5" complete all as specified and directed.

All as per item No 35 above but of size 11"x9" complete all as specified and directed.

All as per item No 35 above but of size 13"x11" complete all as specified and directed.

S&F in repLacement of sunken box size 4"x4'' and making good disturbed surface to match with the existing surface of wall by applying putty and applying colour / white wash finish complete all as specified and directed.

S&F in replacement of sunken box size 7"x4" and making good disturbed surface to match with the existing surface of wall by applying putty and applying colour / white wash finish complete all as specified and directed.

S&F in repair sunken box size 10"x8" and making good disturbed surface to match with the existing surface of wall by applying putty and applying colour / white wash finish complete all as specified and directed.

S&F LED Batten - 3 in 1 having length 1135 mm rated wattage 20 watt lumen 2000 watt power factor>.9 colour temperature 3 in 1 (6500 K,4000K,3000K) CRI >80 Prptection class IP 20 connecting up with pvc sheathed 1.5 sq mm 3 core copper conductor flexible wire from ceiling rose to fitting fix complete all as specified and directed. Note:- All the above mentioned specifications will be verified through LM 79 and LM 80 report of NABL accredited lab before supply of LED fixtures.

S&F of LED Aluminium batten luminaire surface mounted 4 feet system wattage of 20/22 Watts with lifetime of not less than 50000 burning hours with 70% of its initial lumen maintained.CRI>80, Power Factor>.95 ,THD<20% ,Surge protection 3 KV in CM, IP-20n Protected , meets LED IS Specifications , Class-1 , short circuit and over circuit protection voltage range-150 to 270 AC,system efficiency at luminaire level > 100lumen/watt and ibncluding connecting up with pvc sheathed 1.5 sq mm 3 core copper conductor flexible wire from ceiling rose to fitting fix complete all as specified and directed. Note:- All the above mentioned specifications will be verified through LM 79 and LM 80 report of NABL accredited lab before supply of LED fixtures.

S&F of LED PVC batten luminaire surface mounted 4 feet system wattage of 20/22 Watts with lifetime of not less than 50000 burning hours with 70% of its initial lumen maintained.CRI>80, Power Factor>.95 ,THD<20% ,Surge protection 3 KV in CM, IP-20n Protected , meets LED IS Specifications , Class-1 , short circuit and over circuit protection voltage range-150 to 270 AC,system efficiency at luminaire level > 100lumen/watt and ibncluding connecting up with pvc sheathed 1.5 sq mm 3 core copper conductor flexible wire from ceiling rose to fitting fix complete all as specified and directed. Note:- All the above mentioned specifications will be verified through LM 79 and LM 80 report of NABL accredited lab before supply of LED fixtures.

S&F in replacement luminaire 2'x2' 35/36 watt 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified & directed..

S&F in replacement of LED light fitting recess mounted 36 watt 1'x4' with all accessories , suitable for amstrong/grid/POP ceiling complete with integrated electronic driver and making electrical connection with 3 core copper wire to ceiling rose properly complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, in extruded aluminium housing 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete all as specified & directed.

S&F in replacement of LED Post Top Lantern 40 watt made in die cast aluminium housing with decorative clear opal acrylic diffuser and IP-65 protection CCT 5700K fixing with proper arrangements and making electrical connection complete all as specified & directed.

S&F in replacement of LED Post Top globe master made up of unbreakable polycarbonate suitable for mounting on gate with LED bulb 25 W with proper arrangements and making electrical connection complete all as specified and directed.

M&L for sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps earthing complete all as specified and directed.

S&F in replacement of Modular AC Box with 20 A SP MCB Plastic enclosure & unbreakable heavy duty with ISI Plugtop complete all as specified & directed.

Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 protection with 200 Amp rated bus bar complete all as specified & directed.

All as per srl item No 52 above but for 8 way complete all as specified and directed.

M&L for MCB single pole 240 volts 6 to 32 amps, 'B' curveurvewith rupturing capacity 10 KA using thimbles of required size complete all as specified and directed.

M&L MCB single pole & neutral 240 volts 63 amps, 'B' Curve with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed.

S&F LED in repair wall security light 20/25 W pressure die cast aluminium IP-66 road way luminaries with high power LED as light source having efficacy 120 lm/W complete all as specified and directed

Supply & Fix LED lamp 12 watt having lumen 1200 power factor>.9 colour temperature 6500K CRI>80 protection class IP 20 suitabale for batten holder complete all as specified and directed.

Supply & Fix LED lamp 9 watt having lumen 900 power factor>.9 colour temperature 6500K CRI>80 protection class IP 20 suitabale for batten holder complete all as specified and directed.

S & F distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link, complete with one MCCB 4 pole 415 Volts 125Amps rating with rupturing cap 16 KA of the same make as of distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site complete all as specified and directed.

Supply and laying to wall or poles or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium multistranded conductor 10 sq. mm nominal cross section twin core for service connections complete all as specified and directed.

All as per srl item No 60 above but cable of size 6 Sqmm 2 core complete all as specified and directed.

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 Sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 2.5 Sqmm as earth lead in & including concealed PVC conduit medium grade 32mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed.

S&F switch socket combination 2 in 1 , 5 pin , 5 Amp flush type universal with complete box complete all as specified and directed.

S&F switch socket combination 2 in 1 , 5 pin , 15 Amp flush type universal with complete box complete all as specified and directed.

S&F smart integrated solar street light with built in Mono crystalline panel, Lithium Ferro phosphate (LiFePO4) Battery, MPPT Charge controller and PIR Sensor with Colour Temperature 6000-6500K including pole Complete all as specified & directed.

M&L for pre cast cement concrete ( 1:4:8) type D2 using 40mm graded stone aggregate for foundation filling of poles as mass concrete complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground, floors or pavings n exc15 cm thick below or above ground level complete all as specified and directed.

S&F Emergency LED Batten gets automatically switched on during a power cut and runs effectively upto 4 hours having rated wattage 20 Watt Lumen (AC) 2000 Lumen (DC) 500 PF> .9 Colour temperature 6500 K CRI>80 protection class IP 20 complete all as specified and directed.

S&F Emergency LED lamp gets automatically switched on during a power cut and runs effectively upto 3 hours having rated wattage 9 Watt Lumen (AC) 900 Lumen (DC) 350 PF> .9 Colour temperature 6500 K CRI>80 protection class IP 20 complete all as specified and directed.

S&F Emergency LED lamp gets automatically switched on during a power cut and runs effectively upto 3 hours having rated wattage 12 Watt Lumen (AC) 1200 Lumen (DC) 450 PF> .9 Colour temperature 6500 K CRI>80 protection class IP 20 complete all as specified and directed.

S&F LED Batten- Motion sensor based by sensing the movement of a human being with-in a range of 15 feet and switches off automatically when no movement is detected within 15 feet, thus saving electrically rated wattage 20 watt lumen 2000 PF>0.9 Colour temperature 6500K CRI>80 class IP 20 complete all as specified and directed.

S&F LED lamp- Motion sensor based by sensing the movement of a human being with-in a range of 15 feet and switches off automatically when no movement is detected for 2 min, thus saving electrically rated wattage 10 watt lumen 900 PF>0.9 Colour temperature 6500K CRI>80 class IP 20 complete all as specified and directed.

NEW TECH ELCTRICALS (BID ID -3061543)

S B ENTERPRISES (BID ID -3064962)

Kumar Electricals (BID ID -3061281)

DEO Traders (BID ID -3064466)

V D ENTERPRISES (BID ID -3073166)

m/s A.A brothers (BID ID -3065414)