SPECIAL REPAIR TO JCOs/OR QTRS (BLOCK NO. 18 AND 22) IN KHYBER LINE UNDER GE (SOUTH) DELHI CANTT-10

Amount

Taking down door/window chowkhat or frame with shutters (without taking off shutters from the frame exc 1.5 sqm but nexc 4 sqm each complete all as specified and directed.

Taking down door/window chowkhat or frame with shutters (without taking off shutters from the frame n.exc 1.5 sqm each complete all as specified and directed..

S&F factory made 2nd class 35 mm thick hardwood glazed and skelton shutters open rebated and prepared to receive glass / gauze etc ( with or without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 cluse 8.24(a) complete all as specified and directed.

S&F factory made 2nd class hard wood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat mould plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock and botton rail either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing & as directed.

S&F solid PVC doors & frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 guage & fixing in opening as per specification & drg in SSR 2020 Part II & as directed.

S&F 100 mm size stainless steel butt hinges medium weight complete all as specified & directed.

S&F 75 mm size stainless steel butt hinges medium weight complete all as specified & directed.

M&L for factory made PVC cupboard frame of size 75mmx40mm with 4 mm wall thickness made out of extruded 4 mm thick plain/prelam PVC sheet of density 600Kg/cum manufactured by an ISO 9001-2015 certified company, reinforced with 15 mm x 15 mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 02 Nos of 150 mm long brackets of 10 mm x 10mm MS square tubes. The door frame shall be fixed to wall using 65/100 mm long MS screws to be provided for each vertical member and minimum of 02 Nos of screw to be provided horizontal member etc complete all as specified and directed.

M&L for factory made PVC flush type shutter of 18mm thick consisting of panel of Hollow PVC profile of 12 mm thickness consisting of MS frame made out of MS tube of 16 gauge and size of 10 mmx 10mm mitred all around the hollow profile section and lipped with 8 mm (4mmx2mm) thick and 12 mm wide on styles and rails using solvent cement. The inner panel shall consist of 4 mm plain/prelam PVC sheet of density 600 Kg/cum manufactured by an ISO 9001-2015 certified company on the front side and 2 mm plain/prelam PVC sheet using solvent cement on both side of the panel. The edges of the shutter is lipped by 18 mm width x 1mm thick PVC sheet using solvent cement etc including necessary fittings, locking and fixing arranmgement i.e. piano hinges, locking and fixing arrangement etc as per manufacturer's specification and drawing complete all as specified and directed .

S&F in repair 18/19mm thick prelaminated particle board exterior grade , prelaminated both side with decorative choice lamination fixed with screws to timber frame complete all as specified and as directed. .

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to aluminium window frame / wooden doors or steel section windows complete all as specified and as directed.

S&F 150mm long stainless steel , barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F stainless steel ,barrel tower bolts of extruded section, of size 100mm. complete all as specified and as directed .

Supply and fixing for ISI marked 250mm long stainless steel sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed .

S & F stainless steel handles of 100 mm size. complete all as specified and as directed .

S&F stainless steel handles of 150 mm size complete all as specified and as directed .

S&F gate and shutter hook and eye 150mm size, aluminium plate type-II complete all as specified and as directed .

S&F floor door stopper of stainless steel body and tongue,anodised,with hard drawn steel spring of 140 mm size with vulcanised rubber piece. complete all as specified and as directed .

S&F hasp and staple,75mm size safety type,stainless steel including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F rolled mild steel in Fe 410-W(Gde-E-250) quality-A, framed work as in doors or gates of angle or other section with gusset plates, etc., complete, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section(two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and directed. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

S&F Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for preparation of new untreated surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified and directed.

S&F in repair, 25 mm bore mild steel 0.8mm thick conduit pipe with PVC ribbed lamination of required length for curtain rods including two fixing mild steel powder coated matching colour full round or half round with fixing nuts (bracket holders),& PVC golden finish end knobs(Two noumber for each curtain rod of any length) and PVC gold finish curtain ring @ 3 Nos. per feet complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable to store and rabbish off the premises complete all as specified and directed..

M&L for non Skid ceramic tiles 7 to 8mm thick coloured & joint free (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed coloured ,joint free ceramic tiles in vertical surface of size 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured joint free non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match for laying floor finishcomplete all as specified and directed.

M&L for 15 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, complete all as specified and as directed .

M&L for 10 mm thick rendering on brick/concrete surfaces in CM (1:4) (as screeds in back of tiles) in dado complete all as specified and directed.

M&L for 20 mm thick granite in single piece (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps cooking platefom and other similar situations complete all as specified and directed.

S&F in repair wash hand basin vitreous China flat back 550x450mm size white, including PVC waste coupling 32mm size, pair of brackets of mild steel 35 x 35 x 6mm size including complete all as specified and directed .

Dismantling of floor of WC with WC seat & taken out the cinder from sunken portion of WC, taking down of cement plaster of any thickness & description of wall & floor & M&L for 25mm dia medium grade GI pipe spout projecting at least 150mm beyond outer face of wall ,15mm thick plaster 1:4 in CM mixed with integral Water proofing compound both on floor & wall , apply Epoxy Resin Coating polymer(water proofing coating for sunken portion )both on floor as well on wall, Sunken portion filled with graded cinder & laid 50mm thick floor in PCC 1:2:4 (using 20mm graded stone aggregate) floor area not exc. 3.50 sqm complete all as specified and directed.

S&F in repair vitreous china squatting pan (Orissa pattern) long pan fixed size 580x440mm white with integral footrest with `P' or `S' trap complete (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair Brass CP mixer for Wash hand basin for mixing hot & cold water,15 mm bore, screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC connection for 15 mm bore pipe, 450mm long complete all as specified and directed.

S&F in repair 32/ 40 mm bore and 75 long PVC Waste pipe suitable for WHB /Sink complete all as specified and directed .

S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair, PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and PVC flush pipe 32 mm dia for low level flushing cistern complete all as specified and directed..

S&F in repairs 15mm chromium plated bib tap long body with flange fixed in 15mm bore of pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed.

S&F in repair 15 mm angle stop valves (fancy type), cast copper alloy , chromium palted, screwed down high pressure witg crutch and butter fly handles , screwed with iron pipes or for union complete all as specified .

S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair brass CP shower rose with swivel joint, size 100/125mm with arm including fixing to steel pipes complete all as specified and directed.

S& F in repairs PTMT grating doom 125 mm dia with waste hole (Minimum weight 40 gms) complete all as specified and directed.

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling complete all as specified and directed..

M&L for 15 mm thick rendering on internal surfaces with ready mix plaster ( as manufacturr's instructions ) on faces of bricks or concrete surfaces , finished even and smooth without using extra cement ,complete all as specified and directed.

M&L for 15 mm thick rendering on external surfaces with ready mix plaster ( as manufacture's instructions ) on faces of bricks or concrete surfaces , finished even and smooth without using extra cement ,complete all as specified and directed.

M&L for 5 mm thick rendering on ceiling with ready mix plaster ( as manufacturr's instructions ) on faces of bricks or concrete surfaces , finished even and smooth without using extra cement ,complete all as specified and directed.

M&L for preparation of old decorated wall surfaces by complete removal of existing treatment and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) complete all as specified and directed.

M& L for complete removal of existing treatment of old treated surface and applying two coats of distemper oil emulsion over & including one coat of water based primer & wall care putty on wall to achieve uniform, even & smooth surfaces complete all as specified and directed.

M&L for prepapring old plastered surfaces and applying one coat of white wash on wall complete all as specified and as directed.

M&L for prepapring old plastered surfaces and applying one coat of white wash on ceiling complete all as specified and as directed.

M&L for preparation of newly plaster surfaces and applying three coats of white wash on ceilling complete all as specified and directed.

M&L for applying two coats of cement base paint, white or tinted on new plastered surface including preparation of surface complete all as specified and directed.

M& L for of new plastered surface and applying two coats of distemper oil emulsion over & including one coat of water based primer & wall care putty on wall to achieve uniform, even & smooth surfaces complete all as specified and directed.

M&L for Cutting chases for concealed water tubing or concealed conduct and making good in Cement mortar 1:3; cutting not exc 10 cm in girth in brick wall complete all as specified and directed .

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and as directed.

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and as directed.

Refixing old steel tubing of 15 mm bore and connections in new or old position ( wall , ceiling , floor etc ) complete all as specified and directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position ( wall , ceiling , floor etc ) complete all as specified and directed.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed.

S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed.

Taking down cast iron pipes including fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings/pipes laid in trenches,floors or fixed to walls all as directed including earth work, demolition of PCC / Brick work complete all as specified, for the following sizes of pipes:-

a) 100 mm bore of pipe.

b) 75 mm bore of pipe.

S&F cast iron sand soil waste or vent pipes (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed complete all as specified, for the following sizes of pipes:-

a) 100 mm bore of pipe.

b) 75 mm bore of pipe.

S&F in repair, cast iron branch pieces (ISI Marked), single (equal or unequal) ordinary of inverted spigot or socket type complete all as specified,for the following sizes of pipes:-

a) 100 mm bore of pipe.

b) 75 mm bore of pipe.

S&F in repair, cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified, for the following sizes of pipes:-

a) 100 mm bore of pipe.

b) 75 mm bore of pipe.

M&L in repair 75 mm out let dia CI floor trap incl jointing to waste pipe in cement joint complete all as specified and directed.

M&L in repair 100 mm out let dia CI floor trap incl jointing to waste pipe in cement joint complete all as specified and directed.

S&F in repair PVC(SWR) pipes 110mm bore size single socketed, in any length with rubber ring joints, fixed to wall with and including MS flat iron clamp 25x 3 mm complete including taking down old rain water pipe complete all as specified and directed..

S&F in repairs PVC(SWR) pipes 75mm bore size single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC(SWR) bends any radius, of 110mm bore size complete all as specified and directed.

S&F in repair PVC(SWR) bends any radius, with threaded type door eye of 110mm bore size complete all as specified and directed.

S&F in repair PVC(SWR) bends any radius, of 75mm bore size complete all as specified and directed.

S&F PVC(SWR) bends any radius, with threaded type door eye of 75mm bore size complete all as specified and directed.

M&L cutting of trees including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified and directed.

Demolition of brick work built in CM incl quoins, arches, pillers etc complete all as specified and directed.

M&L brick work in cement mortar (1:6) using sub class 'B' bricks old size, straight or curved on plan exc 6 mtr mean radius complete all as specified.

Demolition of existng brick tiles or terracing tiles, single layer on roofs, bedded, jointed and pointed in any mortor complete all as specified and directed

Demolition of lime concrete/ Mud in roofs, any thicknes, including plastering and leeping (whether full thickness removed or only or part thereof) complete all as specified and directed.

M&L for spreading / brushing neat cement slurry with 3.00 Kg/ Sqm on old concrete surface all as directed.

M&L for PCC type B0 (1:2:4) (using 12.5 mm graded stone aggregate) average thickness 40 mm for concrete as on roof slope, all as specified and directed.

M&L for screed bed 10 mm thick (average) plaster on concrete surfaces in CM (1:3) on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement all as specified and directed. Note:- Water proofing compound shall be measured and paid seperately)

M&L for water proofing treatment on horizontal or vertical surfaces with provision of oil bound bitumen primer @ 0.250 Kg/ Sqm and providing 3 mm thick, APP modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non-oven polyster fabric weighing not less than 150 gm /Sqm all as per detailed specifications and applying a coat of blown grade hot bitumen 85/25 @ 1.20 Kg / Sqm, Complete all as specified and as directed.

M&L for cement concrete tiles 20cmx20cmx20mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and pigments over and including 20 mm thick screed bed in CM (1:4) complete all as specified and directed . complete all as specified and directed.

M&L for Cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed..

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in benching, roof kerbs and similar work rounded or chamfered include necessary form work complete all as specified and directed.

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.

Demolition of lime concrete or cement concrete including tiles etc in ground floors and pavings not exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate as in sub base of floor / plinth protection etc finished surface fair & even complete all as specified and directed.

M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with gery cement and no pigment complete all as specified and directed. .

M&L for moorum/ sand filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed.

M&L for roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc and brushing and applying neat cement slurry with 3.0 Kg of cement per sq metre complete all as specified and directed.

S&F machine cut kota stone slab flooring 18-20 mm thick laid over and including 20 mm thick cement screed base 1: 6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed .

S&F machine cut kota stone in dado/vertical surfaces, 18-20 mm thick fixed over and including 15 mm thick cement screed base 1: 3, fixed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed .

Dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),tripple layer white from out side, hoisted and fixed in position all as specified in SSR Part I of 500 ltr capacity with threaded type lid cover Complete all as specified and directed.

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball ,screwed for iron pipe and fixed.complete all as specified and directed.

S&F gun globe or gate valve for 15 mm bore pipe with iron wheel had screwed both ends for iron pipe Complete all as specified and directed.

S&F gun globe or gate valve for 20 mm bore pipe with iron wheel head screwed both ends for iron pipe Complete all as specified and directed.

S&F galvanised iron tank nipple 15mm bore suitable for HDPE water tank complete all as specified and directed.

S&F in repairs 1.00mm thick stainless steel plate rack overall size (31 inch X 36 inch X 10 inch) fixed with steel screws complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board of 1 mm thick sheet for kitchen with plug washer, waste pipe, cast iron cantilever brackets connecting union, fixed in position complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting scrubbing down concrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over and including steel welded mesh having 2 mm dia of wire and aperature 50mm, total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc of slabs, chajjas,fins, facias, parapets, Lintels, columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 2 storey bldgs including finishes as existing complete all as specified & directed.

All as per Ser item No 109.00 here in before but thickness of gunite exc. 25mm but n.exc 40mm (average thickness) -ditto-

S&F for FRP window horizontal shade (Chhajja) for sun shade and protect to rain, thickness and weight as per manufacturers instruction, fixed with screw with drilling holes in the walls and surface make up with the existing surface with plaster and cement base paint/ exterior emulson including demolition of existing chajja and removal of waste material out side MoD land (Colour will be approved by GE) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F rolled mild steel work as in railing (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets, etc Fe410 -w (Gde E250 ) quality 'A' Complete all as specified and directed .

Demolition of RCC other than ground floor ie beams , staircases , landing chajjas and similar suspended work complete all as specified and directed.

M&L for RCC 1:2: 4 type B1 using 20 mm graded stone agregate as in Slabs supported on walls landings, balconies,canopies, deck slabs and in shelves complete all as specified and directed.

M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed.

Demolition of brick work / stone boulder measonary built in cement mortar or cement lime mortar of any description and in any position complete all as specified and directed.

M&L for brick work using old sized sub class 'B' bricks, built in cement mortar (1:4), straight or curved on plan, exc 6 metre mean radius complete all as specified.

M&L for 15mm thick cement plaster cement mortar (1:4) on fair faces of brick or concrete surfaces, finished fair & even , complete all as specified and directed.

Excavation in trenches in soft/loose soil, not exc 1.5m wide & n exc 1.5m in depth as in foundation , mainholes etc.n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified & directed.

Demolition and breaking up drain pipes 150mm dia (salt glazed stoneware/ACC/RCC), set in cement mortar, including removal of waste material upto 500 metre distance at the place notified by the Engineer-in Charge of following sizes of pipe

M&L for salt glazed stoneware drain pipes 150 mm bore, laid in trenches and jointed in cement mortar (1:4) and tested complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against sides of pipes of 150 mm dia after they are laid and tested, complete all as specified and directed.

Returning, filling in including, spreading, levelling, watering and well ramming in layers n.exc 25cm thick, in soft/loose soil complete all as specified and directed.

Removal of excavated surplus soil to a distance not exc 50 metre where directed by Engineer-in-Charge at a level not exc 1.5m above or below the starting point complete all as specified.

S&F in repairs SFRC manhole cover size 1200 X 600 x 70 mm thick with frame set in cement mortar 1:4 complete all as specified and directed.

M&L for in repair, salt glazed stone ware gully trap, square or round mouthed,150mm x 150 mm size, shape as required,including dismantling and taking out of old GT and jointing with old connection and pipes complete all as specified and directed.

Extra for forming fair furnished drain or channels 30 cm inner girth in cement concrete using extra cement including forming moulds,mitred/stopped ends etc Complete all as specified and directed.

M&L for PCC(1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, benching rounded or chamferred on edges including necessary form work complete all as specified and directed.

Taking down carefully the old U/S Aluminium point wiring (light, fan, socket or power) complete fitting such as switch, ceiling roses, pendants, sockets, regulators, all type light fitting, ding dong bell etc and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish complete all as specified and directed.

M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through new concealed PVC conduit in wall and existing conduit in ceiling and including replacement of unserviceable pressed steel terminal boxes with modular steel terminal boxes including white cover modular plate with frame suitable for modular fan regulators etc of required size complete with earth continuity wire 1.5 sqmm and connected to earh dolly complete all as specified and directed for the following:- Note :- 1. The Rate is inclusive of providing point woring on casing caping if there is blockage/damage in existing conduit on ceiling. 2. The rates are inclusive of cutting/chasing and making good disturbed surface with CM 1:3 and same finishes with the adjoinin surface of disturbed with the adjoining surface of disturbed area with OBD/Colour was/white wash complete.

One light /fan/Bell point/security light controlled by one way switch

One 3 pin socket outlet 5 amps on same board

One 3 pin socket outlet 5 amps point independent board with cable 2.5 Sqmm for main current and 2.5 sqmm as earth wire as power point complete all as specified and directed..

One 3 pin socket outlet, 15 amps on independent board with cable 4 Sqmm for main current and 4 sqmm as earth wire as power point complete all as specified and directed..

One light point controlled by two 2-way switch 230 volts complete all as specified and directed.

M&L for concealed point wiring complete with stranded copper conductor 4 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through new concealed PVC conduit in wall and existing conduit in ceiling and including replacement of unserviceable pressed steel terminal boxes with modular steel terminal boxes including white cover modular plate with frame suitable for modular fan regulators etc of required size complete with earth continuity wire 4 sqmm and connected to earh dolly complete all as specified and directed for 3 pin socket outlet /seat metal enclosure on indipendent board. Note :- 1. The Rate is inclusive of providing point woring on casing caping if there is blockage/damage in existing conduit on ceiling. 2. The rates are inclusive of cutting/chasing and making good disturbed surface with CM 1:3 and same finishes with the adjoinin surface of disturbed with the adjoining surface of disturbed area with OBD/Colour was/white wash complete.

S&F Switch modular type, 1Module, 6 Amps one way complete all as specified and directed.

S&F Socket outlet modular type 2M, 2/3 pin, 6 Amp complete all as specified and directed.

S&F Switch modular type 1M 6 Amp 2-way complete all as specified and directed.

S&F modular AC box with MCB 20 Amp complete with metal box and 3 Pin top plug complete all as specified and directed. Note : Rates are inclusive of cutting / chases for mounting metal box on wall and making good to disturbed surfaces with OBD / Colour wash / white wash and wall putty where ever required.

S&F Socket outlet modular type 2M, 2/3 pin, 16 Amp complete all as specified and directed.

S&F Switch modular type 1M, 16 Amp complete all as specified and directed.

S&F electric bell ding dong AC, 230 volts single phase complete all as specified and directed.

S&F Bell push modular type 1M 5/6 Amp complete all as specified and directed.

S&F Wall mounted LED Integrated Batten 20 Watt - 4 feet White, indoor decorative PVC extruded LED batten-Integrated complete all as speficied and directed. Make Bajaj Cat Part No-BCLAB 20W WH LED P/ Crompton Cat Part No- LDL-20-CDL / Wipro Cat Part No-LL20-281-XXX-65AL1.

S&F Wall mounted LED Integrated Batten 10 Watt-2 feet White, indoor decorative PVC extrudedLED batten -integrated type complete all as speficied and directed. Make- Bajaj Cat Part No-BCLSB10 WH / Crompton Cat Part No-LCTLN-10-CDL / Havells Cat Part No-ENDURALINEARNEOBS10WLED865SPCWH.

Supply fix battan holder PVC insulated body complete all as specified and directed.

S&F inverter LED lamp 12 Watt rechargeable for home, cool daylight, Base complete all as specified and directed.

S&F Electronic fan regulator, modular type 2M, 4 steps, complete all as specified and directed.

Taking down of ceiling fan and keeping in safe custody and refixing it back after completion of point wiring complete all as specified and directed .

S&F BLDC (Brushless DIrect Current) Ceiling fan, 1200mm suitable for regulator, not less than 350 RPM, not less than Air delivery 215 cum/minute, voltage 220V, high air follow with silence operation, having full copper winding & ribbed blade 3 Nos A/M blades. The BLDC motor fan shall have 100% rust free blade. The fan shall be BEE 5 star rating and compliant with IS-374 and making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan including taking down old ceiling fan and depositing to MES store yard complete all as specified and directed . (Make : Orient (Hector)/ CG (Efficiencia Neo)/ Bajaj (Energos 28)

M&L for opening of hole through out the wall as suitable for exhaust fan of size 300mm sweep and fixing of nut-bolts with 4" anchor fastner of suitable size including civil work and making good the disturbed surface and all as per site requirement complete all as specified and directed. Note : The quoted rates against this item are inclusive of cutting hole opening civil work with MS faster bolt of 8mm dia and 100mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan.

S&F steel body exhaust fan 300 mm sweep, 230 Volts with louver and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan complete all as specified and directed.

Taking down of exhaust fan and keeping in safe custody and refixing it back after completion of point wiring complete all as specified and directed at site.

S&F Wall mounting 10 Watt LED decorative wall light fixture made up of Polycarbonate, with suitable with all connection all as specified and directed. Make:-Cat Part No PGR0301011 of Polycab or Cat Part No BULKHEAD 10W CDL of BAJAJ equivalent model in Crompton Greaves

S&F in replacement Sheet metal enclosure of size 350 x300 x 150 mm suitable for mounting Single phase electric meter fabricated from 2mm thick CRCA sheet with anti corrosive dust and vermin proof including taking down meter and refix after completion of wiring work including connection with 6 Sqmm wire from DB to Meter . Note:- The meter cover shall have a fully transparent window. The window shall be of transparent, high grade UV stabilized engineering plastic for easy reading of all the displayed values/parameters and observation of operation indicator. The window shall preferably be an integral part of meter cover all as specified and directed.

S&F 10 LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE including all accessories connecting up twin core flexible copper conductor cable complete all as specified and directed. Make- Havells Cat Part No – HEXAFT10WLED857SSYMBOPC / Crompton Cat Part No- LBHE-10-CDL / Wipro Cat Part No- WP1099

S&F ceiling rose surfaces bakelite minimum size 65x50mm with two/ three terminals complete all as specified and directed.

S&F water storage heater 25 ltr capacity, 5 Star rated , glass line, vertical type, AC, Single Phase electric, 230 Volt, complete with heating element, thermostat, 3 core lead, Plug top, safety valve, including electric and water connection with suitable nut, bolts & washers and making good to disturbed surface complete all as specified and directed.

S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked, stainless steel, suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and directed.

S&F in replacement of sheet metal enclosuer V TPN 4 way for MCB 63A TPN, 3P incomer, double door DB, IP-54, bus bar, neutral link , earth bar and din rail complete all as specified and directed.

S&F in replacement of MCB TPN 'C' curve 63Amps, 415 Volts with 10 KA including electrical connection with incomer with appropriate size of aluminium lugs and insulation packing complete all as specified and directed.

Supply and fix in replacement of MCB DB SPN 8 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having100 Amps rated bus bar complete all as specified and directed by.

M&L in replacement MCB SPN 'C' curve 40 Amps 240 Volts , 10 KA complete all as specified and directed.

M&L in replacement MCB SP 'C' curve 06 to 32 Amps 240 Volts 10 KA complete all as specified and directed.

M&L in replacement MCB SP 'C' curve 40 Amps 240 Volts 10 KA complete all as specified and directed.

S&F in replacement of LED Building security light fitting 40 Watt including fabrication of GI bracket 25mm dia suitable for fixing of LED light fitting duly fixed with clamps, nut, bolts, & washers etc complete all as specified and directed. Make – Crompton Cat Part No-LSTS-40-CDL-M / C Crompton cat part No-LSTS-40-CDL-M and Bajaj Cat Part No – BCLST40W LED

S &F in replacement for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing as directed by Engr-in-Charge.

S &F in replacement for submain wiring of two runs of 6 Sqmm size for main cable and one run of 6 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked , drawn in and including PVC concealed conduit of size 25mm dia with complete all as specified and directed. Note : (i) Phase should be Red/Yellow/Blue, neutral should be black and earthing wire should be of green colour. (ii) Two runs of cable 6 Sqmm with 01 earth wire 6 sqmm & conduit shall be measured as one unit. (iiI) The rates are inclusive of Cutting / chasing and making good to disturbed surface with CM 1: 3 and same surface finishes with the adjoining surface of disturbed area with OBD/Colour wash /white wash complete.

S&F 16 A, 30MA Earth leakage circuit breaker 1P+N C16 ELCB complete with two way sheet Metal Enclosure Distribution board for geyser complete all as specified and as directed.

BEHAL TRADERS

MINHAS CONSTRUCTIONS

Shiv Shankar Nirman Co.

M/S Chhavi Constructions Co

Mohit Infratech