357/2023 Drain 190.00

Amount

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of wall W-0009 Brick / Stone in Clay Walls under 3m high initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B TNDSS No 23 & 24VI(S2) VII 9,10

Dismantling Plain Cement Concret depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B TNDSS No 23 & 24VI(S2) VII 9,10

Collection supply and filling of stone dust of approved quarry including cost and conveyance of all materials to site and all labour charge for filling etc complete.

Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Plain Cement Concrete 1:2:4Mix (one part cement, three part sand and six part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Supplying, fabricating and fixing in position factory madeStainless Steel Flush Door Shutter 35mm thick using SS 304Grade 1.6 mm thick, Stainless Sheets on both sides(Equivalent to IS 6911-04 Cr. 19, Ni 9) minimum 8-8.5%nickel and 18% chromium sourced from original stainlesssteel manufacturer with view panel size 30mm x 45mm madeup of 6mm thick clear toughened glass fitted with double sideadhesive tape and finished with dowconing silicon sealantfloor spring for each shutter, consealed tower bolt, suitablestainless steel locking arrangement and other necessaryfurniture fittings of approved quality. The vertical styles another frame members and cross stiffeners shall be of samequality stainless steel box section of suitable size andthickness with propercore material as prescribed by theDepartmental Officers

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Finishing the top of flooring with granothatic flooring with cement concrete 1:2:4 (one cement, two sand and four aggrigate) using 10 to 12mm stone chips – 25mm tk etc., Complete.

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.