Shifting of existing water supply main pipeline from Khadoli to Khanvel (4th call)

Amount

Providing and Supplying in standard length ISI mark high density Polyethylene H.D.P.E pipes suitable for potable water as per IS specificatiom no. 4984/1995 incl. all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to Department stores, stacking etc. complete. (10Kg/Cm2) Dia in mm (A)50

Manufacture, Supply & Delivery of Submerged Arc welded M.S.Pipe outside coated with best quality bituminous paint having beveled ends plate or coil conforming to IS-3589-2001 or its latest revision/ammendment for following thickness outside diameter at store or site anywhere in State including all taxes (excl. excise duty), insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance at site , stacking etc. complete. (Thickness 6.3mm) I/S Solvent free liquid epoxy lining (406 Micron) + O/S 3 LPE coated MS Pipe Dia in mm (A) 508

Extra welding for fixing varous appruntances Welding in all positions with required number runs, for M.S pipes internally and/or externally incl. gauging wherever necessary, fixing appruntances and other accessories in connection with pipe laying work as per specification. (A) Welding for pipe thickness above 7 mm

Gas cutting of M.S Pipe Gas cutting (either square cut/V cut ) pipes, plates etc. incl. all cost for following thickness (B) Above 5 mm upto 10 mm

M.S Specials flanged ends Above 300 mm dia

Providing & supplying ISI mark CI D/F sluice valves as per IS: 14846 (Latest Edition) of following class and diameter including all taxes, insurance, transportation, frieght charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. PN-1.6 With hand/wheel cap operated (Alt-1 type long body) (A) Sluice Valve - 65 Dia.

Sluice Valve - 80 Dia.

Sluice Valve - 100 Dia.

Sluice Valve - 500 Dia.

Sluice With Air Valve Sluice Valve - 100 Dia.

Providing & supplying ISI mark CI D/F Scour Valves as per IS: 14846 (Latest Edition) of following class and diameter including all taxes, insurance, transportation, frieght charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. PN-1.6 With hand/wheel cap operated (Alt-1 type long body) Scour Valve - 100 Dia.

Scour Valve - 500 Dia.

Scour Valve - 600 Dia.

Providing and supplying C.I Temper proof Air-valves with S. S with 304 float gun metal, nozel of approved make and quality of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. Temper Proof Air Valve (Without Isolating Sluice Valve PN 1.6) 100

Excavation for pipe line trenches incl all safety provisions using site rails & stacking excavated stuff up to a lead of 90 mt clearing the site etc. complete for lifts and strata as specified. Upto 1.50 mt Depth In all sorts of soil and Soft murrum

In hard murrum, boulders incl. Macadam road

In hard rock and / or in C.C 1:2:4 or RCC blasting, breaking, chiseling,or buy chiseling or breaking only

1.50 mt to 3.00 mt Depth In soft rock and / or masonary in Cm or LM/Line concrete (50%)

In hard rock and / or in C.C 1:2:4 or RCC blasting, breaking, chiseling,or buy chiseling or breaking only (50%)

3.00 mt to 4.50 mt Depth In soft rock and / or masonary in Cm or LM/Line concrete (50%)

In hard rock and / or in C.C 1:2:4 or RCC blasting, breaking, chiseling,or buy chiseling or breaking only (50%)

4.50 mt to 6.00 mt Depth In soft rock and / or masonary in Cm or LM/Line concrete (50%)

In hard rock and / or in C.C 1:2:4 or RCC blasting, breaking, chiseling,or buy chiseling or breaking only (50%)

Providing bedding incl. raing, watering, levelling, consolidating etc. Complete as per standard and instruction of engineer incharge As above with Murrum brought from outside including all lead

Lowering, laying and jointing HDPE pipes and specials of following class and diameter (By butt fusion welding method) including cost of conveyance from stores to site of works at all level including cost of labour, material, giving satisfactory hydraulic testing etc. comp. Pipe dia. In (A) 50

Lowering, laying, jointing & welding in position to correct line & level M.S. Pipe with outerside 3 LPE coating & inside solvent free liquid epoxy lining on pedestal or chairs upon prepared formation or prepared bedding in trenches the rates include conveyance from store to site of work loading, unloading, heat shrink sleev jointing hydrotesting etc.complete. (A) 508

Lowering, laying and jointing in position following C.I./ D/F Reflux valves, Butterfly valves, Sluice valves and Air valves including cost of all labour, jointing materials, including nut , bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves) Sluice Valve (A) Sluice Valve - 65 Dia.

Sluice Valve - 80 Dia.

Sluice Valve - 100 Dia.

Sluice Valve - 500 Dia.

Sluice With Air Valve double ball flanged Sluice Valve - 100 Dia.

Scour Valve Scour Valve - 100 Dia.

Scour Valve - 500 Dia.

Scour Valve - 600 Dia.

Air Valve Double ball Flanged 100

Construction of valve chamber in brick or bela- stone masonary locally available in CM 1:6 Foundation concrete 150 mm thick in CC 1:4:8 of trap metal size 25mm to 40 mm thick, inside cement plaster in C.M 1:3 &cement pointing out side in C.M 1:3 and top cover or precast RCC slab 100 mm thick (with key hole in two patrs, each with handles or MS Bar etc.comp. as given size) Up to 1 Mt depth from GL to pipe invert level including complete civil works but excl. cost of excavation & refilling. With cast in situ RCC slab in one single piece with of C.I.M.H Frame & cover. (excl. cost of C.I.M.H Frame & cover) with 23 mm thick brick masonary wall in C.M.1 : 6 d) 0.6 X 0.6 X 1 m deep

a) 1.3 X 1.3 X 1 m deep

Providing and cast in situ C.C. in grade M-20 (Proportions as per mix design or as per table 9 of IS: 456:2000 in masses by of wight batching) using granite, quazite trap metal of size 6 mm to 20 mm for RCC Work, including scaffolding centering, formwork, needle vibrated consolidating, curing complete upto 6m depth or height (excluding cost of reinforcement and neat finishing) with centering and shuttering/deshuttering etc. complete for structure other than water retaining (Below G.L.) Without Water proffing chemical Thrust Block for Bend

Supplying cutting, bending, binding and placing in position steel as per plan and design and as per ISS 2502 including cost of steel and binding wire for reservoirs/structures only including lift up to 6 meter height or depth below G.L. for all diameters Do-Thermo mechanically treated (TMT)bars Fe-500 grade for all diameters..

Providing C.C.M 100 for encasing pipes using trap metals size 12 mm to 50 mm incl. form work, curing consolidation etc. complete for various location on pipe line Encasing for River or Kotar Crossing

Refilling the pipeline trenches including ramming, watering, consolidating desposal of surplus stuff as directed within a radius of 3 km.

Purchasing ,Supplying at site works with railway freight, loading, unloading, carting etc. complete such as joints channels, angle, iron rails etc. Including labour charges for lowering, laying , erecting, fixing, various size of M.S. section such as joints chanel, angles , plates etc. completed with fabrication. For hoisting and launching the bridge on pillar supports perfectly in line and level incl. cost of counter weight if required,jacks, pully blocks or any other supporting structures for bridge in beams and joist,channels,angles,tees, flats,clits etc. complete for M.S. bridge and pump house flooring including tree coats anti-corrosive paint over it and gantry girder.

Providing and casting in situ C.C. in grade M-25 (porportions as per mixdesign using granite, quartzite trap metal of size 12 mm or 20 mm for RCC work 6 mm or 12 mm, including scaffolding centering, form work, needle vibrated consolidation, curing comp. up to 6 meter depth or height (excluding cost of reinforcement and neat finishing) with centering and shuttering etc. comp. for structure for upto 6 m height. Footing for column or foundation (with form work)

Erection of air valve riser by installing new GI pipe of medium duty 4 mt length with necessary CI fitting such as flange of appropriate size, nut bolts and embedded the pipe in R.C.C M 20 with offset of 150 mm around pipe with necessary reinforcement etc. complete. Air Valve 100 mm Dia M.S (A) 508

Drilling of 200 mm dia. horizontal borehole for watermain pipeline crossing under the road incl. in all strata with required length incl. fixing of 150 mm dia. M.S casing pipe of mininum 5mm thick or IRS casing pipe with pushing etc complete. Providing and fixing various size of pipe of carrying pipe 80 mm dia (Complete 45 m length)

Drilling of 250 mm dia. horizontal borehole for watermain pipeline crossing under the road incl. in all strata with required length incl. fixing of 200 mm dia. M.S casing pipe of mininum 5mm thick or IRS casing pipe with pushing etc complete. Providing and fixing various size of pipe of carrying pipe 100 mm dia (Complete 45 m length)

Drilling of 600 mm dia. horizontal borehole for watermain pipeline crossing under the road incl. in all strata with required length incl. fixing of 500 mm dia. M.S casing pipe of mininum 5mm thick or IRS casing pipe with pushing etc complete. Providing and fixing various size of pipepipe of carrying pipe 273.1 - 355.6 mm (Complete 45 m length)

Drilling of 900 mm dia. horizontal borehole for watermain pipeline crossing under the road incl. in all strata with required length incl. fixing of 800 mm dia. M.S casing pipe of mininum 5mm thick or IRS casing pipe with pushing etc complete. Providing and fixing various size of pipe pipe of carrying pipe 406.4 - 508 mm (Complete 45 m length)

Dismentaling the existing structure including removing and stacking the dismentelled materials as and where directed. (A) R.C.C. work

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials(A) By manual means in area of light jungle

Providing and laying pucca rubble pitching laidin cement mortar 1:4 proportion with the surface pointed with cement mortar of 1:3 proportion for following thickness incl. curing etc. complete for all leads and lifts. 30 cm Thickness

Brick work using common burnt clay building having crushing strength not less than 35 kg/sq. cm In foundation and plinth in cement mortar 1:5 modular (Upto 10 ton)

N.P.PATEL AND CO.