Repair to external water supply pipe line and connected items at South Camp, West Camp, North Camp and East Camp under AGE (I) MFFR

Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.

Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 200 mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches including dismantling of old existing unserviceable GI/CI/DI pipe complete all as specified and as directed. Note :- Excavation & earthwork, DI fittings / specials & joints shall be measured & paid for separately under relevant items of this Schedule.

Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 150 mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches including dismantling of old existing unserviceable GI/CI/DI pipe complete all as specified and as directed. Note :- Excavation & earthwork, DI fittings / specials & joints shall be measured & paid for separately under relevant items of this Schedule.

Supply and fixing rubber gasket tyton joint (push on joint) including rubber ring suitable for 200mm bore socket & spigot DI pipe and fittings complete all as specified and as directed.

Supply and fixing rubber gasket tyton joint (push on joint) including rubber ring suitable for 150mm bore socket & spigot DI pipe and fittings complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 150mm bore (ISI Marked) with & including all fittings, laid in trenches, including taking up or down unserviceable steel water tubing and connections of 150mm bore complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 100mm bore (ISI Marked) with & including all fittings, laid in trenches, including taking up or down unserviceable steel water tubing and connections of 100mm bore complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

Dismantling and taking up or down steel water tubing and connections of 80mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 80mm bore (ISI Marked) with & including all fittings, laid in trenches, complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 80mm bore obtained serviceable vide serial item No. 10.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and laid in trenches etc in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.

Dismantling and taking up or down steel water tubing and connections of 50mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 50mm bore (ISI Marked) with & including all fittings, laid in trenches, complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 50mm bore obtained serviceable vide serial item No. 13.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and laid in trenches etc in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.

M&L for galvanized steel water tubing medium grade of 25mm bore (ISI Marked) with & including all fittings, laid in trenches, including taking up or down unserviceable steel water tubing and connections of 25mm bore complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 20mm bore (ISI Marked) with & including all fittings, laid in trenches, including taking up or down unserviceable steel water tubing and connections of 20mm bore complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 200 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 200 mm bore, complete all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 150 mm bore, complete all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 100 mm bore, complete all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 80 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 80 mm bore, complete all as specified & directed.

S&F Non Return Valve of size 200mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint and including dismantling & taking out old unserviceable non return valve of 200 mm bore, complete all as specified & directed.

S&F Non Return Valve of size 150mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint and including dismantling & taking out old unserviceable non return valve of 150 mm bore, complete all as specified & directed.

S&F Non Return Valve of size 100mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint and including dismantling & taking out old unserviceable non return valve of 100 mm bore, complete all as specified & directed.

Supply and fixing cast iron foot valve of size 80mm bore as per IS:4038 (ISI marked), swing type operation, flanged ends with rubber insertion sheet 3mm thick, nuts, bolts and washers including taking down old existing unserviceable foot valve of 80mm bore complete all as specified & as directed.

Supply and fixing cast iron butterfly valve of size 80mm bore ISI marked, heavy duty, Class PN-1.6, SG iron disc type, flanged ends with rubber insertion sheet 3mm thick, nuts, bolts and washers including taking down old existing unserviceable butterfly valve of 80mm bore complete all as specified & as directed.

S&F 20 mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 20 mm bore, complete, all as specified & directed.

S&F 25 mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 25 mm bore, complete, all as specified & directed.

S&F 50 mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 50 mm bore, complete, all as specified & directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-15, suitable for 200 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-15, suitable for 150 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-15, suitable for 100 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs HDPE/PVC detachable joint with rubber ring, ISI marked, suitable for 160/150 mm bore HDPE/PVC pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs HDPE/PVC detachable joint with rubber ring, ISI marked, suitable for 80 mm bore HDPE/PVC pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs HDPE/PVC detachable joint with rubber ring, ISI marked, suitable for 50 mm bore HDPE/PVC pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

Supply and fixing 10000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I & PS Sec-II and as directed including disconnecting & taking down the existing unserviceable water tank.

Supply and fixing 5000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I & PS Sec-II and as directed including disconnecting & taking down the existing unserviceable water tank.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 200mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 150mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing header leaking with required welding and necessary petty items complete all as specified & as directed. Note : All T&P and machine need to be arranged by contractor on site and all rates deemed to be included in quoted rates above.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 80mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking joint of GI pipe or fittings of 80mm bore by dismantling joint and re-jointing with & including replacement of unserviceable fitting and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking joint of GI pipe or fittings of 50mm bore by dismantling joint and re-jointing with & including replacement of unserviceable fitting and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking joint of GI pipe or fittings of 25mm bore by dismantling joint and re-jointing with & including replacement of unserviceable fitting and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking joint of GI pipe or fittings of 20mm bore by dismantling joint and re-jointing with & including replacement of unserviceable fitting and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in replacement of MCCB, 4 Pole, 200 Amps, rupturing capacity 36 KA, 415 Volt grade, AC, 50 Hz, adjustable Thermal - Magnetic release type, complete all as specified & as directed.

S&F in replacement of MCCB, 4 Pole, 160 Amps, rupturing capacity 36 KA, 415 Volt grade, AC, 50 Hz, Magnetic fixed type, complete all as specified & as directed.

S&F in replacement of MCCB, 4 Pole, 125 Amps, rupturing capacity 25 KA, 415 Volt grade, AC, 50 Hz, Magnetic fixed type, complete all as specified & as directed.

S&F in replacement of MCCB, 4 Pole, 63 Amps rating, rupturing capacity 16 KA, 415 Volt grade, AC, 50 Hz, Magnetic fixed type, complete all as specified & as directed.

S&F in replacement of Three Phase terminal box suitable for three phase motor as per existing type & size with all necessary fixing arrangement such as copper lugs, nut, bolts, etc complete all as specified and as directed.

S&F in replacement of electronic Power Contactor, 3 Pole, 18 Amp AC3 rating, 415 Volt, complete all as specified and as directed. Make : Type ‘MNX 18’ of L&T or equivalent in makes mentioned in Appendix 'B' here-in-after.

S&F in replacement of electronic Power Contactor, 3 Pole, 22 Amp AC3 rating, 415 Volt, complete all as specified and as directed. Make : Type ‘MNX 22’ of L&T or equivalent in makes mentioned in Appendix 'B' here-in-after.

S&F in replacement of electronic Power Contactor, 3 Pole, 25 Amp AC3 rating, 415 Volt, complete all as specified and as directed. Make : Type ‘MNX 25’ of L&T or equivalent in makes mentioned in Appendix 'B' here-in-after.

S&F in replacement of motor Protection Relay suitable for 5 to 10 HP Pump set, 415 Volts, 50 Hz, 3 Phase, complete all as specified and as directed.

S&F in replacement of motor Protection Relay suitable for 20 HP Pump set, 415 Volts, 50 Hz, 3 Phase, complete all as specified and as directed.

S&F in replacement of motor Protection Relay suitable for 40 HP Pump set, 415 Volts, 50 Hz, 3 Phase, complete all as specified and as directed.

S&F in replacement of motor Protection Relay suitable for 12.5/15 HP Pump set, 415 Volts, 50 Hz, 3 Phase, complete all as specified and as directed.

Dismantling of existing defective induction motor of the following size and make from the foundation, disconnecting the electric connecting coupling pulley and taking out to work shop cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with solid copper conductor (winding wire) complete including varnishing, drying ovening overhauling greeasing and fixing in the same position making necessary electric connection and testing on induction motor complete all as specified and as directed by Engineer-in-Charge:-

40 HP capacity, 03 Phase, 415 volt 50 HZ any make/type.

20 HP capacity, 03 Phase, 415 volt 50 HZ any make/type.

15 HP capacity, 03 Phase, 415 volt 50 HZ any make/type.

12.5/10 HP capacity, 03 Phase, 415 volt 50 HZ any make/type.

7.5 HP capacity, 03 Phase, 415 volt 50 HZ any make/type.

3/5 HP capacity, 03 Phase, 415 volt 50 HZ any make/type.

Dismantling from foundation frame by disconnecting suction/delivery lines and coupling opening and transport to workshop and re-assembling after repair/replacement of defective parts of centrifugal pump set of following capacity and any make and replacement of worn out spare parts as Stuffing box, inter Stage ring, Gland Cap CI with Nut bolt, shaft sleeve bronze, set of gasket broken part of pump set, pump controller, pump seals, pump impeller with locking screw & nut , pump Bearing with housing DE, Discharge nozzle, casing wear ring etc as specified and as directed by engr -in-charge Note for serial item No. 59.00 to 60.00 :- (i) The contractor must attend the complaint from MES and resolve the problem within 48 hour, In case contractor failed to rectify the defect within the time limit, a penalty Rs 1000.00 per comaplaint per day will be imposed as penality for the delayed. (ii) After repairs testing is carried out it at site in presence of MES Rep and warranty of minimum 6 months from the date of installation after repair.

40 HP capacity, 03 Phase, 415 volt 50 Hz.

15/20 HP capacity, 03 Phase, 415 volt 50 Hz.

7.5 to12.5 HP capacity, 03 Phase, 415 volt 50 Hz.

3/5 HP capacity, 03 Phase, 415 volt 50 Hz.

Supply and fixing in replacement CI/DI specials fittings upto 200mm dia of any size, type radius, angle, tapers, increasing, decreasing socket, tee, tail piece and collar complete all as specified and as directed.

Supply and fixing aviation obstruction light fitting solar powered, 10 Watt, Li-ion type battery rechargeable type, twin type, IP66, 12 volt DC solar panel, comprising of aluminium alloy housing with polycarbonate enclosure and accessories complete with LED to be fixed on the OHR with suitable fixing accessories with (min height 2 feet) complete all as specified and as directed.

M&L for construction of valve chamber 900mm x 600mm x 1000mm size including necessary earth work in any type of soil, PCC in foundation 1:3:6 type C-2, brick work in CM 1:6 with 10mm thick plaster in CM 1:4 internally and 15mm thick plaster in CM 1:4 externally, 4mm thick MS cover with hinges and locking arrangement fixed to angle iron frame of ISA 40x40x6mm complete with 2 coats of synthetic enamel paint over a coat of red oxide primer on all metal surfaces and three coats of white wash on plastered surfacesof valve chamber complete all as specified and shown on TD drawing and as directed.

M&L for Earthing complete with galvanized steel perforated pipe electrode 40mm bore, medium grade, 2.5 meters length, buried directly in ground preferably verticle with top edge of the plate not less than 1.25 meter below normal ground level connected to galvanized iron strip 32x6mm as earthing lead by means of bolts, nuts, check nuts and washer of galvanized iron or steel other end connected to earthing test/equipment and protected by 40mm dia GI light grade protection pipe from test point to earthing test point/equipment fixed and perforated water pipe of 20mm bore GI medium grade of length 2.25 meter and top with socket & pluga nd bottom connected to earth plate by slit and two bolts/nuts/washer. PCC Chamber in cement concrete (1:2:4) type B-1 and 40 mm thick precast RCC (1:2:4) type B0 cover with 40mm x40mm x3mmm MS nagle iron frame, excvation & earthwork complete all as shown in electrical plate No 3 of SSR Part-I complete all as specified and as directed. Notes: (i) GI strip upto earth test point/equipment is included in this item. (ii) Outer edge of earth pit chamber shall be 1.5 meter away from the outer edge of PCC chamber (iii) Minimum wieght of reinforcement shall be 1kg for each earth pit cover.