SPECIAL REPAIR TO OR MD ACCN BLDG NO 124/01 AND 124/04 AT QUEENS LINE AT JAIPUR MIL STN UNDER GE (S) JAIPUR

Amount

Taking down cement plaster including raking out joints on brick or stone wall, hacking for key scrubbing down with water etc built in CM complete all as specified and as directed.

M&L rendering 15 mm thick in CM(1:6) on stone walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:4 on concrete surfaces including finished even & smooth without using extra cement on ceiling complete all as specified and as directed.

M&L complete removal of existing wall surface & preparation of old surfaces and applying two coats of oil bound distemper of approved shade/tint over on walls complete all as specified and as directed.

M&L for preparation new surfaces and applying two coats of oil bound distemper of approved shade/tint over a priming coat of chalk whiting on walls complete all as specified and as directed.

M&L complete removal of existing ceiling surface & preparation of old surface & applying three coats of white wash on ceiling surface complete all as specified and as directed.

M&L for preparation and applying three coats of white wash on newly plastered ceiling surface complete all as specified and as directed.

M&L complete removal of existing wall surface & preparation of surfaces and applying two coats of cement base paint on wall complete all as specified and as directed.

M&L for preparation of new surfaces and applying two coats of cement base paint over a priming coat of chalk whiting on wall complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F Coloured Glazed ceramic tiles size 300x450mm x 7mm thick edge cut/ joint free , on walls etc in the combination of light and dark shed concept set & jointed in neat cement slurry & pointed in coloured cement to match over and incl 10mm thick plaster in cement mortar (1:4) complete all as specified and as directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over and incl 15 mm thick screed in CM ( 1:6) complete all as specified and as directed.

S&F PVC connection 15mm bore with 2 Nos PTMT nuts, 45cm long fixed complete all as specified and as directed.

M&L in repair 15mm bore CP fancy Type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

M&L in repair Towel ring of brass CP Squar flange complete all as specified and as directed. Make-CERA CAT PART NO CQ 102 or equivalent.

M&L in repair Chromium plated Overhead Rain shower with relvoling joint and 115mmlong shower arm with wall flange 15 mm bore fancy type complete all specified and as directed. Make-CERA CAT PART NO CP 140 or equivalent

M&L in repair Chromium plated angle stop cock with wall flange fancy type cast copper alloy 15 mm bore complete all as specified and as directed. Make-CERA CAT PART NO CQ 608 or equivalent

M&L in repair CP cast copper alloy bib taps Long body with wall flange fancy type of 15 mm bore quarter turn fixed complete all as specified and as directed.

S&F in repairs Vitreous China wash basin, coloured oval shape , size 550x400mm but including brackets, coupling and waste pipe complete all as specified and as directed.

S&F in repair concealed type stop valve 15mm bore, copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair Stop valves 20 mm bore, copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes complete all as specified and as directed.

15 mm bore

20 mm bore

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified 500 Ltrs Capacity including Dismantling water tanks complete all as specified and as directed.

S&F in repair Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

M&L for providing circular, raised platform of height 20 cm below the tank and base 15cm more than the external dia of thank of PVC cylindrical water tank of capacity 500 liters using PCC 1:3:6 type C1 using 20mm graded stone aggregate with fair finish complete all as specified and as directed.

S&F in repairs elegent mirror PVC cabinet with towel rail of size 475 x 600 x 150 mm complete all as specified and as directed.

S&F in repair Soap dish brass CP complete all as specified and as directed. Make-CERA CAT PART NO CA 103 or equivalent

S&F in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 75mm dia complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 110mm dia complete all as specified and as directed.

S&F in repair PVC (SWR), junction single, (Single T) equal or unequal 75mm dia complete all as specified and as directed.

S&F in repair PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and as directed.

S&F in repair PVC (SWR) vent cowl 110mm dia complete all as specified and as directed.

M&L in repair PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L in repair PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and as directed.

S&F bathroom Glass corner of best quality (as per sample) complete all as specified and as directed.

M&L in repair Fancy type MS bracket suitable for curtain rod fixed complete all as specified and as directed.

M&L in repair 20 mm bore Drapery Fancy type curtain rod fixed complete all as specified and as directed.

M&L in repair Fancy type caps/ side Bulbs PVC powder coated suitable for curtain rod fixed complete all as specified and as directed.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

All as per item No 42.00 above but area n exc 1.50 Sqm each. complete all as specified and as directed.

Taking down shutters of any description exc 1.00 sqm but n exc 2.50 sqm each complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter (with wood free EPS), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. complete all as specified and as directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and as directed.

S&F Pressed steel frames 105x60mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S&F Pressed steel frames 125x60mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

M&L for preparing of old painted surfaces of steel materials of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and as directed.

M&L for preparing of New painted surfaces of steel materials of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over priming coat of zinc red oxide on steel surfaces complete all as specified and as directed.

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position complete all as specified and as directed.

S&F 2nd Class HW (Sal/hollock) factory made plain framed panelled shutters 35 mm thick (any number of panel) with panels of timber flats on both sides (feather edged) or of veneered particle board medium density , wood particle board with commercial face veneers complete all as specified and as directed.

S&F 2nd class hard wood (sal/hollock) 35mm thick glazed and skeleton shutters open rebated and prepared to revive glass ,gauze etc (with out sash bars) edges for framing plain chanferred or rounded fitted with cut and mitred beads for securing glass etc, size as specified is SSR Part-I Section 8 clause 8.24 (a) for doors complete all as specified and as directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and as directed.

S&F Aluminium handles 125 mm size, . type, anodised complete all as specified and as directed.

M&L for preparing of New painted surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat of synethic enamel paint on wooden surfaces over a coat of pink primer complete all as specified and as directed.

M&L for preparing of old painted surfaces of wood or wood based materials of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and as directed.

Demolition of Stone slabs in roofs, suspended floors, chajjas, landings, etc. any thickness, jointed in any mortar complete all as specified and as directed.

M&L Granite 16 to 18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and incl 10mm thick screed bed in CM(1:4) complete all as specified and as directed.

M&L powder coated (minimum thickness of 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and as directed.

M&L powder coated (minimum thickness of 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and as directed.

S&F 5mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregates as in sub base to floor etc complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L 50mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement including cutting joints @ 1.2 m distance including providing and filling bitumen in the joints complete all as specified and as directed.

M&L in repair 19 mm thick WPC membrane kitchen cabnaite door shutter in wood grain colour, half round edge fixed complete all as specified and as directed.

S&F in repair Auto close hinges, stainless steel, bright finish or electrogalvanised of suitable size fixed complete all as specified and as directed.

S&F SS Plate rack of size 900mmx750mm x 300mm including fixing to wall with screws complete all as specified and as directed.

M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern of capacity 10 Ltrs, low level, white, with inlet,ball valve, float and handle including brackets complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and sheathed cable enclosed in concealed/ pvc conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings complete all as specified and as directed:-

One light/fan/ bell point controlled by one, one way switch

One 3 pin 5 Amp socket outlet on same board with other switches

One 3 pin 5 Amp socket outlet on independent board with other switches

All as per Item No 76.00 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and as directed.

All as per Item No 76.00 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and as directed.

S&F switch, piano type 230/250 volts complete all as specified and as directed.

Single pole, one way 5 Amp rating, Flush type.

Single pole, one way 15 Amp rating, Flush type.

Bell push, 5 Amp, Flush type.

S&F electric Bell Ding Don AC 230volts single pole complete all as specified and as directed.

Supply and fixing of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.

S&F Socket complete all as specified and as directed.

Socket outlet 3 Pin, 5A, Flush type.

Socket outlet 3 Pin, 15A, Flush type.

M&L in repair Ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and as directed.

Supply and fixing of exhaust fan steel body AC single phase 230 V of size 300mm sweep heavy duty with blades and frame and louver complete all as specified and as directed.

Supply & fix in repair LED light fitting 1x 20 watt Ac decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of three core suitable for size from ceiling rose complete all as specified and as directed.

Supply & fix in repair LED light fitting mirror type with high out put diffuser 2 feet 10 watt 220 V AC decorative type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of three core suitable for size from ceiling rose complete all as specified and as directed.

Supply & fixing lamp holder PVC body complete all as specified and directed with complete all as specified and as directed.

S&F in repair factory made, sheet distribution boards, SP&N 12 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar of the under mentioned rating complete all as specified and as directed. complete all as specified and as directed.

S&F in repair rating 240V 10 KA C curve MCB of following poles and current carrying capacity in MCB DB complete with connection testing and commissioning complete all as specified and as directed.

SP 5 to 32 Amp

SPN 40 to 63 Amp

M & L in repair Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn throughn and including PVC rigid conduit medium grade 20mm bore and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 4 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity complete all as specified and as directed. Note:- (2 x 4 Sqmm + 1 x 4 Sqmm + 1 Run of PVC conduit shall be measured as one unit).

Taking down old u/s Earthing and M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth strip 25X 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 32 mm dia " light grage " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 3 of SSR part -I and connecting to earthing testing on completion including cast iron cover frame and PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as specified and as directed. Note : PCC Chamber shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner.

Taking down of existing geyser from existing location and re fixing the same after necessary minor repair complete all as specified and as directed.

Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt complete all as specified and as directed.

MSR INFRATECH (BID ID -3146989)

M/S ROHIT CONSTRUCTION (BID ID -3152636)

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3146594)