REPAIR TO WOODEN DOORS, WINDOW, ALL DOORS/WINDOW AND JOINERY RELATED WORKS IN AKBAR ROAD, BARRACK ROAD, LAL BARRACK ROAD, RP COLONY AND OTM ACCN UNDER AGE B/R -I (W) OF GE (W) AGRA

Amount

Taking down chowkhats or frames (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 Sqm including making good of jambs with cement mortar 1:4 etc complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frames) n exc 1.5 Sqm including making good of jambs with cement mortar 1:4 etc complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 each complete all as specified and directed.

S&F mild steel farmed work as in doors or ckowkats or gates of angle or other section with guest plates rail, brasses rail etc exculsive of steel sheeting or other covering hanging also fastening and fixing complete confirming to Gde Fe-290 including shop coat of red oxide including prepration of surface before fixing complete all as specified and directed.

S&F MS hold fast and similar article conforming to Fe-290 Gde-E-165-0 or Fe-310-o all specified and directed

M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregated as in cill, step and for inserting hold fast of doors and windows all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood in glazed skelton shutters, open rebated and prepare to receive glass/gauge, with or without sash bar, edges of framing plain chamfered or rounded fitted with cut and mitred beads for scecuring glass etc. complete all as specified and directed.

M&L preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification and shown in drg in SSR Part -II 2020 complete all as specified and as directed

S&F factory made solid panel PVC door moulded shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drg shown in SSR Part -II 2020 complete all as specified and as directed

Taking down shutters of any description n exc 1 Sqm each complete all as specified and directed.

S&F 18mm thick WPC (Wood Polymer Composite) of minimum density 600kg/cum one side prelaminates and other side plain for kitchen cabinet shutter including fixing of 0.8mm thick acrylic laminates as edge banding in matching colour over all exposed edge etc incl SS handles,hinges and all connected assesories complete all as specified and as directed.

S&F 18mm thick WPC (Wood Polymer Composite) of minimum density 600kg/cum both side plain for kitchen cabinet shutter including fixing of 0.8mm thick acrylic laminates as edge banding in matching colour over all exposed edge complete incl SS handles,hinges and all connected assesories all as specified and as directed.

Taking down old steel/wooden windows/ventilators with holdfast & making good surface to match with the existing and S&F for Eco-4000 Series windows/ventilator fabricated from roll formed sections made of Galvanized steel colour coated/powder coated (Base steel as per IS 513"D" quality, galvanized as per IS 277 with finc of 120 gms/ sqm) with total coated thickness of 0.60mm. Sections should be with primer coat of epoxy primer of 5-7 microns, or powder coated with pure polyester powder up to 50-60 microns thick. Section for frame should be of 72mmx50mm, section for mullion should be of 72mm x50mm, section for shutter frame should be of 47mmx20mm, section for fixed glass bead shoulld be of 12mmx12mm and section for fly mesh shoulld be of 40mmx20mm. Each glazed shutter and mesh shutter shoulld be provided with SS pivot hinges-1 set sec color handle and stay. Each glazed shutter and fixed glass portions should be provided with a glass of 5mm plain float glass. Mesh shutter should be provided with stainless steel 32 guage fly mesh of 304 grade with 144 holes per sq.In. Window/ventilator should be provided with grill made of 10mm sq MS bars welded to at 150mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws,incl taking down old window/ventilator.NOTE: The quoted rate shall be deemed to be included the following:- (i) All type of fitting required to operate window/ventilator is deemed to be inclusive in the rate quoted. (ii) making good of jambs in CM (1:4) and applying OBD in two coats including with putty complete

M & L for powder coated (any colour) anodized aluminium (sliding type) windows with three track bottom track size 92X29.5X2mm thick side and top track frame size 92X29.5X2mm and shutters powder coated aluminium anodized 39X20X2 mm thick (02 of glass and 01 of SS wire cloth) including necessry aluminium fittings like joint cleat glazing and gauging clips/strips and rubber packing anodized aluminium snap beading screws etc with 5mm thick tinned glass/SS wire mesh with etc including all fittings & fixture and incl taking down old window complete all as specified and directed.

M & L for powder coated (any colour) anodized aluminium (sliding type) windows with two track bottom track size 92X29.5X2mm thick side and top track frame size 92X29.5X2mm and shutters powder coated aluminium anodized 39X20X2 mm thick (02 of glass and 01 of SS wire cloth) including necessry aluminium fittings like joint cleat glazing and gauging clips/strips and rubber packing anodized aluminium snap beading screws etc with 5mm thick tinned glass/SS wire mesh with etc including all fittings & fixture complete all as specified and directed.

S&F Powder coated aluminium anodised frame for doors with one or more rebates including joining cleat for fixing etc complete all as specified and directed. (minimum thickness of powder coating 50 micron)

S&F powder coated aluminium anodised door shutters, aluminium section weighing 0.55 kg/ m including necessary aluminium anodised joining cleats, glazing clips, ruber neoprene packing, aluminium anodised handles 2 Nos in each door, aluminium anodised hinges 03 No's, aluminium anodised Tower bolt 02 No's, Powder coated aluminum snap beading, screws etc. complete all as specified and directed. (Minimum thickness of powder coating 50 micron)

S&F 12mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations for partition etc, complete all as specified and as directed.

S&F 5.5mm thick sheet glass black ordinary quality for Aluminium framed partition fixed with aluminium anodised cleat and rubber beading area in each pane area n.exc 2.00 sqm etc complete all as specified and directed

S&F 5mm thick figured/frosted glass ordinary/printed quality for aluminium frames fixed with aluminium anodised cleat and rubber beading area in each pane area n.exc 2.00 sqm etc complete all as specified and directed

S&F in repair for aluminium anodized powder coated grills made out by using 6 x 5 mm aluminium section having square gap of 50 mm thick with fixing rails of channels 12-15 mm etc complete all as shown in design Cat Part No -DG 101-DG-102 of jindal or equivlement as approved by GE.

S&F in repair double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty complete all as specified and as directed

S&F in repair aluminium (Die cast ) body door closer hydraulically regulated designation No-3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed

S&F in repair mortice lock vertical type & 4- levers of 100mm brass body with two keys complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) complete all as specified and directed.

M&L 3mm thick ordinary quality sheet glass and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F figured sheet glass 3.00mm thick pin headed type and glazing with oil putty complete all as specified and directed.

S&F galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staples complete all as specified and directed.

S&F 150 mm long stainless steel finished barrel tower bolt of extruded section complete all as specified and as directed

S&F 100 mm long stainless steel finished barrel tower bolt of extruded section complete all as specified and as directed

S&F 150 mm long stainless steel finished handle fabricated type complete all as specified and as directed

S&F 100 mm long stainless steel finished handle fabricated type complete all as specified and as directed

S&F SS sliding door bolt, 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F stainless steel finished butt hinges cold rolled medium weight of size 75 mm complete all as specified and as directed

S&F repair butt hinges, medium weight, cold rolled SS, 100mm size complete all as specified and as directed

M&L preparation of new or previously untreated steel surfaces exc 10 cm width or girth and applying two coat of synthetic enameled paint over one coatof red oxide primer complete all as specified and directed.

M&L welding in repairs not exc 2.5 cm in length and not exc 6mm thick complete all as specified and directed.

M&L welding in repairs exc 2.5 cm but not exc 5.0 cm in length and not exc 6mm thick complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed

Dismantling floor, hearth wall tiling including cement and sand mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed.

M&L for 100mm thick PCC (1:3:6) type B2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and as directed

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors and including 20mm thick screed bed in CM (1:6) of approved colour and pointing with grey cement and pigment complete all as specified and directed.

M&L preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying one coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

S & F in repair 25 mm dia SS drapery rods fancy type with brackets ,stops, rollers ,side knobs etc complete all as specified and directed.

R.S BUILDERS (BID ID -3154158)

SHRI RADHAYSHYAM JHA (BID ID -3154066)

BHULLAR CONSTRUTION COMPANY (BID ID -3153923)

Attar Singh and Sons (BID ID -3153639)

SahaDevSingh Constructions (BID ID -3153598)

S S TRADERS (BID ID -3153647)

M/s Kok Singh Sisodia (BID ID -3151553)

yash constructions (BID ID -3153610)