Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.5 LAccepted-AOC 267 1 B KULAKARAI STREET PATTRAVAKKAM NEXT TO SIDCO 145 CHENNAI | CHENNAI | TAMIL NADU | 600001 | ₹9.5 L Quoted ₹11.2 L | L1 | Accepted-AOC L1 bidder |
| 2 | L2₹9.7 LRejected-Finance | ₹9.7 L | L2 | Rejected-Finance L2 bidder |
| Sl No | Description | Qty | Unit | BHARAKATH INDUSTRIES L2 | MICRO SPARES L1 |
|---|---|---|---|---|---|
| 1.00 | Low Temperature Super Heater Coil outer Bend of size Dia 44.5 X 5.0 mm thick X 1039 mm long Material: SA 213 T11 Technical specification:
As per drawing enclosed for Sl.No 1
i. Design pressure - 157.7 kg.cm2
ii. Design Temperature - 480⁰ C
iii. Both ends each pipe should be marked with
material colour codification
iv. Bending process - Cold process
All dimensions are in mm | 50 | Nos | 1,83,300 ₹2,16,294 | 1,54,500 ₹1,82,310 Lowest |
| 2.00 | Low Temperature Super Heater Coil Middle Bend of size Dia 44.5 X 5.0 mm thick X 849 mm long Material: SA 213 T11 Technical specification:
As per drawing enclosed for Sl.No 2
i. Design pressure - 157.7 kg.cm2
ii. Design Temperature - 480⁰ C
iii. Both ends each pipe should be marked with
material colour codification
iv. Bending process - Cold process
All dimensions are in mm | 50 | Nos | 1,56,000 ₹1,84,080 | 1,31,900 ₹1,55,642 Lowest |
| 3.00 | Low Temperature Super Heater Coil Inner Bend of size Dia 44.5 X 5.0 mm thick X 1151 mm long Material: SA 213 T11 Technical specification:
As per drawing enclosed for Sl.No 3
i. Design pressure - 157.7 kg.cm2
ii. Design Temperature - 480⁰ C
iii. Both ends each pipe should be marked with
material colour codification
iv. Bending process - Cold process
All dimensions are in mm | 50 | Nos | 1,72,500 ₹2,03,550 | 1,48,400 ₹1,75,112 Lowest |
| 4.00 | Low Temperature Super Heater terminal tube 900 Bend of size Dia 44.5 X 5.0 mm thick X 979 mm long Material: SA 213 T11. Technical specification:
As per drawing enclosed for Sl.No.4
i. Design pressure - 157.7 kg.cm2
ii. Design Temperature - 480⁰ C
iii. Both ends each pipe should be marked with
material colour codification
iv. Bending process - Cold process
All dimensions are in mm | 50 | Nos | 1,62,500 ₹1,91,750 | 1,37,400 ₹1,62,132 Lowest |
| 5.00 | Boiler 8th Header supply bend Style- I
Size: 51mm X5.0mm thickX3.5mtr Length
Material : SA 210Gr.A1.
Technical specification:
As per drawing enclosed for Sl.No 5
I. Bends shall be coated with Anti Corrosive Varnish
II. Color coding shall be given on both end of tubes as per ASME Standard
III. Length: length of 3.5 & 2.5 mtr.
Quantity tolerance :0/+ 5%
IV. Thickness tolerance : 0 / + 28 % as per ASME Standard | 20 | Nos | 1,59,000 ₹1,87,620 | 1,49,200 ₹1,76,056 Lowest |
| 6.00 | Boiler 8th Header supply bend Style- II
Size: 51mm X5.0mm thickX2.5mtr Length
Material : SA 210Gr .A1
Technical specification:
As per drawing enclosed for Sl.No 6
I. Bends shall be coated with Anti Corrosive Varnish
II. Color coding shall be given on both end of tubes as per ASME Standard
III. Length: length of 3.5 & 2.5 mtr.
Quantity tolerance :0/+ 5%
IV. Thickness tolerance : 0 / + 28 % as per ASME Standard | 20 | Nos | 1,15,000 ₹1,35,700 | 1,04,100 ₹1,22,838 Lowest |
Tender Value
Refer Docs
EMD Value
₹6,700
Closing Date
5 Jan 2026, 2:00 pmClosed
CE MTPS I
CE MTPS I METTUR DAM
Procurement Of Low Temperature Super Heater Coil 04 Items and Boiler 8th Header Supply Bend Style I and II 02 items
2025_EB_633481_1
CE MTPS I SE PA MM AEE2 OT 614 25 26
Open Tender
Miscellaneous Goods
Supply
90 days
CE MTPS I
as enclosed
4 documents required · 4 mandatory
₹0
₹6,700
Yes
22 Jul 2026
17 Dec 2025
6 Jan 2026
17 Dec 2025
5 Jan 2026
17 Dec 2025
Select, Excess (+), Less (-)
Tender Inviting Authority : CHIEF ENGINEER/MTPS-I/METTUR DAM-6
Name of Work : Procurement ofLow Temperature Super Heater Coil – 04 Items & Boiler 8th Header Supply Bend Style – I & II – 02 Items to the Mettur Thermal Power Station-I
Contract No : CE / MTPS-I / SE / P&A / MM / AEE.2 / OT No. 614 / 2025-26
Name of the Bidder/ Bidding Firm / Company :
Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder in Rs. P GST (If applicable in Percentage) GST Amount in Rs. P Packing & Forwarding charges per Unit In Rs. P. Freight charges per Unit In Rs. P. Insurance charges per Unit In Rs. P. GST for Other charges (P&F + F&I) per Unit In Rs. P. HSN / SAC Code TOTAL AMOUNT excluding taxes in Rs. P TOTAL AMOUNT including taxes Rs. P TOTAL AMOUNT In Words
1 Low Temperature Super Heater Coil outer Bend of size Dia 44.5 X 5.0 mm thick X 1039 mm long Material: SA 213 T11 Technical specification: As per drawing enclosed for Sl.No 1 i. Design pressure - 157.7 kg.cm2 ii. Design Temperature - 480⁰ C iii. Both ends each pipe should be marked with material colour codification iv. Bending process - Cold process All dimensions are in mm item 1 50 Nos 65 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
2 Low Temperature Super Heater Coil Middle Bend of size Dia 44.5 X 5.0 mm thick X 849 mm long Material: SA 213 T11 Technical specification: As per drawing enclosed for Sl.No 2 i. Design pressure - 157.7 kg.cm2 ii. Design Temperature - 480⁰ C iii. Both ends each pipe should be marked with material colour codification iv. Bending process - Cold process All dimensions are in mm item 2 50 Nos 65 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
3 Low Temperature Super Heater Coil Inner Bend of size Dia 44.5 X 5.0 mm thick X 1151 mm long Material: SA 213 T11 Technical specification: As per drawing enclosed for Sl.No 3 i. Design pressure - 157.7 kg.cm2 ii. Design Temperature - 480⁰ C iii. Both ends each pipe should be marked with material colour codification iv. Bending process - Cold process All dimensions are in mm item 3 50 Nos 65 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
4 Low Temperature Super Heater terminal tube 900 Bend of size Dia 44.5 X 5.0 mm thick X 979 mm long Material: SA 213 T11. Technical specification: As per drawing enclosed for Sl.No.4 i. Design pressure - 157.7 kg.cm2 ii. Design Temperature - 480⁰ C iii. Both ends each pipe should be marked with material colour codification iv. Bending process - Cold process All dimensions are in mm item 4 50 Nos 65 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
5 Boiler 8th Header supply bend Style- I Size: 51mm X5.0mm thickX3.5mtr Length Material : SA 210Gr.A1. Technical specification: As per drawing enclosed for Sl.No 5 I. Bends shall be coated with Anti Corrosive Varnish II. Color coding shall be given on both end of tubes as per ASME Standard III. Length: length of 3.5 & 2.5 mtr. Quantity tolerance :0/+ 5% IV. Thickness tolerance : 0 / + 28 % as per ASME Standard item 5 20 Nos 65 Excess(+) Full Conversion INR 18 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
6 Boiler 8th Header supply bend Style- II Size: 51mm X5.0mm thickX2.5mtr Length Material : SA 210Gr .A1 Technical specification: As per drawing enclosed for Sl.No 6 I. Bends shall be coated with Anti Corrosive Varnish II. Color coding shall be given on both end of tubes as per ASME Standard III. Length: length of 3.5 & 2.5 mtr. Quantity tolerance :0/+ 5% IV. Thickness tolerance : 0 / + 28 % as per ASME Standard item 6 20 Nos 65 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos
Quoted Rate in Figures Select %
Quoted Rate in Words
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.17 MB
BOQ_757914.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].