REPAIR AND MAINTENANCE TO PLUMBING AND JOINERY IN OTM AND MD ACCN AT SI LINES AREA UNDER GE BHOPAL

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) n exc 1.50 sqm each including making good of disturbed surfaces all as specified and directed.

Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 Sqm & nxc 4.00 Sqm each including making good of disturbed all as specified and directed.

S & F for pressed steel frame for doors with one or more rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed.

S & F for pressed steel frame for doors with one or more rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed.

M&L for cement concrete 1:3:6, type C0 (using 12.5 mm graded stone aggregate) as in back filling of pressed steel frame etc complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed.

S & F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified and directed.

S & F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.

S & F for 35 mm thick second class hard wood glazed and skeleton shutter’s for door open rebated prepare to receive glass gauge etc (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitered bead’s for securing glass gauge etc size of marker of shutters as per SSR Part-I Section-8 clause 8.2 (a) complete all as specified and directed.

S & F of Factory made, 2nd class hard wood, 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers size of members as specified in SSR Part- I Section 8 Clause 8.24 (a) complete all as speified and directed.

S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat high density of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

S &F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat high density of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.complete all as specified and directed.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)proof and & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. Note: stainless steel butt hinges and necessary S.S screws shall be included in the item.

S&F for factory made 30mm thick 100% Solid WPC (Wood Polymer Composite) laminated wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from extrusion process WPC foam sheet single extruded ( Inner ) with having minimum density not less than 650 kg/cbm, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture proof and Fire Retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter. For fixing Mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed scresws at required distance, scres and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company.

S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) shutters for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 including necessary locks handle, rubber gasket for glass/ wire mesh fixing complete all as specified and as directed

Supply and fix 4.0 mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

M&L granite work 18-20 mm thick (of any type/ colour) (table rubbed and polished/ moulding) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing n white cement (1:2) using marble dust with admixture of pigment to mactch with shade or granite over and including 15 mm thick for screed bed or bedding layers in cement mortar 1:6 complete all as specified and as directed.

Supply and fixed in repairs 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F in repairs butt hinges, 75mm size medium weight cold rolled mild steel complete all as specified and directed.

Supply and fixed 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fixed 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixed 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixed 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

S & F 300mm Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F door closer hydraulically regulated, aluminium body, designation No.2, universal type, suitable for door shutters of weight between 36 to 60 kg complete all as specified and as directed

S&F floor door stoppers 140mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floors complete all as specified and directed.

S&F for galvanized, mild steel wire cloth of 0.63 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with ms steel wire staples complete all as specified and as directed.

S & F in repair 25 mm dia chromium plated, steel drapary curtain rod with bracketes including necessary drilling holes and fixing with rawl plug and suitable screw in wall including designer dom for curtain rod complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of primer to new wooden surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.

S&F in repair to solid PVC wall lining consisting of 5mm thick but wood grain printed PVC sheet used instead of plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as per specified and directed.

S&F in repair to 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed

Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc. 6.0 m mean radius built in cement mortar 1:6 including demolition complete all as speciified and directed.

Material and labour for brick work with fly ash bricks, straight or curved on plan to any radius in half brick wall built in CM 1:4 including demolition complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brickwork or concrete surfaces, finished the surface even and fair without using extra cement including taking down cement plaster of any description on bricks walls complete all as specified and as directed.

Material and labour for rendering 10mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and fair without using extra cement including taking down cement plaster of any description on bricks walls complete all as specified and as directed.

Material and labour for 5 mm rendering in cement mortar (1:3) to ceiling and similar work finished the surface even and fair without using extra cement including taking down cement plaster of any description on bricks walls complete all as specified and as directed.

Supply only intregal water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying two coats of exterior weather proof water base emulsion paint over and a coat white cement based putty (where ever required), complete all as specified & directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of white cement based putty of as required thickness complete all as specified and directed.

M & L for preparation of new plastered or unplastered surfaces as in ceilings and applying 3 coats of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply one coat of oil emulsion distemper all as specified and directed.

Dismantling floor hearh or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Material and labour for ceramic (non skid) tiles area of each tile exc 0.11 sqm but n exc 0.18 sqm of 7 to 8mm thick, as in floors, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 15mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified.

Material and labour for any coloured glazed ceramic tiles size of tiles 450x300x 7 to 8mm thick on vertical surface such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in colour cement to match over and including 10mm thick backing coat or back layer with cement mortar 1:4 all as specified and directed.

Material and labour for 25mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in sub base of floor finish even and rough to receive further floor finishes ( tile/kota stone/ marble ), complete all as complete all as specified and directed.

S&F in repair prelaminated partcle board 18/19 mm thick, exterior grade 1, prelaminated both side with decorative choice lamination fixed with nails to aluminium framed work complete all as specified and directed.

S&F 100 mm stainless steel handle, cast type, polished bright complete all as specified and directed.

M&L for 12 mm thick, plywood (No of ply should not less than 7), grade BWP, type BB fixed with screws to timber frame work all as specified and directed.

S&F in reapir 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed.

S&F in repair to cabinet hinges soft close SS 8 Crank complete all as specified and directed

S&F in repair to 40 mm long magnetic catcher for cupboard shutter complete all as specified and directed.

S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 100mm complete all as specified & directed.

S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 150mm complete all as specified & directed.

S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 200mm complete all as specified & directed.

S&F in repair of SS grating of 100 mm dia size, complete all as specified and directed.

S&F in repairs 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screw for iron pipe mini weight for 210 gms as specified and directed.

S&F 15mm PVC connection of length 450mm with PTMT nuts of superior quality complete all as specified and directed.

S&F in repairs chromium plated brass shower roses 125mm size(approved by Engineer-in-Charge) fixed in repair to steel pipe as union complete all as specified and directed .

Taking up or down steel tubing and connections of 15mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections of 20 mm bore complete all as specified and as directed.

S&F in replacement of GI Tubing, medium grade 15mm bore laid in wall complete including cuttings chases in walls and making good, cutting portion complete all as specified and directed.

Refixing old steel tubing and connections in new or old position 15mm bore laid in wall and cleaning well complete all as specified and directed.

S&F in replacement of GI tubing, medium grade 20mm bore laid in wall complete including cuttings chases in walls and making good, cutting portion all as specified and directed.

Refixing old steel tubing and connections in new or old position 20mm bore laid in wall and cleaning well complete all as specified and directed.

S&F in repair of brass cromium plated, fancy type, bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed.

S & F in repairs pillar taps 15mm bore cast copper alloy with capstan head, chromium plated, fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repair complete all as specified and directed.

S&F in repairs chromium plated, jet spray (health faucet) (ABS body) with 8mm dia 1.2 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and as directed.

S&F in repairs 15 mm dia angle/stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, complete all as specified.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x440mm white with integral foot rest, including trap set and conection to trap, flushing pipe etc. complete including making good to floor all as specified and directed.

S&F in repair Vitreous china EWC 'P' or 'S' Trap , white including plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device suitable for EWC. complete making good to floor fixing bolt all as specified and directed.

S&F in repairs 10 litre capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm cocomplete all as specified and directed.

S & F in repairs vitreous china, wash hand basin white, flat back of size 630x450 mm with pedestal, 32mm PVC pipe, excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete and all as specified.

S&F in repair vitreous china urinal, half stall type including all fittings with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

Supply and fixed in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints laid in trenches and floor with PVC clip including demoliion complete all as specified and directed.

S&F in repairs PVC (SWR) bend 110 mm dia without access door complete all as specified and as directed.

S&F in repair PVC (SWR) junction single 110 mm bore, (single T) equal or unequal with access door complete all as specified and as directed.

Supply and fixed in repair PVC (SWR) pipe 75 mm bore,single socketed, in any length with rubber ring joints laid in trenches and floor with and including PVC clip complete all as specified and directed.

S&F in repair PVC (SWR) junction single 75 mm bore, (single T) equal or unequal with access door complete all as specified and as directed.

S & F in repair PVC (SWR) bend 75 mm dia without access door complete all as specified and as directed.

S&F 75 mm out let PVC (SWR) floor trap with chromium plated grating including jointing to waste pipe and fixed in cement concrete B1 (1:2:4 ) using 20 mm graded stone aggregate complete all as spcefied and directed.

Demolition of un reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as spcefied and directed.

M&L for cement concrete (1:5:10) type E-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete complete all as specified.

M&L for water proofing treatment to RCC sunken floor including wall comprising with the following steps:- (a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. Note:- (i) Laying of APP based membranes shall be done by torch method or as per manufacturer's instructions. (ii) A minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturer's instructions. (iii) All CI/PVC traps in sunken slabs to be enclosed with PCC 1:1.5:3 type B 1 using 20mm gradded stone aggregate of 15mm thick.

S&F in repair 15mm dia PTMT, bib taps screwed down screwed for iron pipe fixed in reps complete all as specified and directed.

S&F in repair pillar taps, fancy type 15mm of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repair stop valve 15mm of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repair 15 mm nipple suitable for HDPE water tanks including necessary driling holes etc fixed complete all as specified and directed.

S&F in repair 20 mm nipple suitable for HDPE water tanks including necessary driling holes etc fixed complete all as specified and directed.

S & F kitchen sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling/waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F stainless steel plate rack of standard pattern & of size 900 x 750 x 250 mm.The thickness of stainless steel sheet shall be 1.00 mm & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed.

S &F in repair 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs to 15 mm wash basin mixer, centre hole, mixing hot and cold water, cast copper alloy, chromium plated fancy type, with capstan head, screwed down high pressure for iron pipe etc and fixed complete all as specfied and directed.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 including fittings in trenches including taking down complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks 3 layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling old water tanks complete all as specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks 3 layers (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I dismantling old water tanks complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 69265.00

Please Enable Macros to View BoQ information