Providing Partition Room Arrangement and Other Facilities of Anakaputhur Office Building Tambaram City Municipal Corporation Zone-1

Amount

Dismantling, clearing away and carefully stacking materials useful Floor finish and dadooing walls in Cement Mortar with mosaic tiles/ glazed tiles/ cuddapah slabs.

Supply , delivery and fixing of Officer Room Partition work New model design with table and chair facility covered including cost and conveyance of materials etc complete

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good for PVC Open light point / Fan point (For Electronic regulator) etc, complete as per standard specifications. SD 22

Supply and fixing 18W 4 Feet LED Fitting with LED complete with Electronic ballast and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting etc, complete as per standard specifications SD 87

AC Ceiling Fan complete 1200 mm (48") Sweep with 300mm Down Rod and Regulator( 1366+232.60) including Cost and conveyance of charges etc, complete as per standard specifications.

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rebate for housing the shutter.

Supply , delivery and fixing of following items

Standing Fan

Wall Fan

Fornt Elevation Name Board with Lighting

Plywood Partision

Grill Stand For Syntex Tank

1000 Liter Syntex tank

Indian Type Toilet

Sitting Table Stainless 3 Sheeter

Normal Chairs

Western Toilet

Wash Hand Basin of size Stainless Steel Sink 2000mm x 450mm x 200mm with all accessories such as cast iron brackets, 32mm dia C.P. waste coupling, rubber plug and chain, 32mm dia 'B' Class G.I. waste pipe, 15mm dia G.M. wheel valve, 15mm dia nylon connection, 15mm dia brass nipples, 15mm C.P. pillar tap etc..

SHREE RADHIKA ENTERPRISES (BID ID -1235003)