Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC 5C H M APARTMENT SATI JAYMATI ROAD ATHGAON KAMRUP ASSAM 781001 | KAMRUP METRO | ASSAM | 781001 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹39.5 L+₹27,995 (0.71%)Rejected-Finance BAID COMPLEX R K CHOUDHURY ROAD KUMAR PARA GUWAHATI 781001 ASSAM | GUWAHATI | KAMRUP METRO | ASSAM | 781001 | L2 | Rejected-Finance Other than L1 bidder |
Tender Value
₹39.5 L
EMD Value
₹79,000
Closing Date
9 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Shillong
HQ CWE Shillong, SE Falls, Shillong - 793011
SMART INTERNAL AND EXTERNAL PERIODICAL SERVICES AND WELCOME MAINTENANCE TO CERTAIN RESIDENTIAL BLDGS AND AT CDA AND LAO OFFICE UNDER GE GUWAHATI
2022_MES_550422_2
8587/GUW/E8
Open Tender
Civil Works
Item Rate
180 days
GE Guwahati
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE Guwahati
₹79,000
Yes
27 Dec 2022
19 Oct 2022
10 Nov 2022
19 Oct 2022
9 Nov 2022
26 Oct 2022
60 days
Amount
Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
Material and labour for rendering 15 mm thick on fair face of brick work or concrete surfaces in cement mortar 1:4 and finishing the surfaces even and fair mixed with liquid water proofing compound as per manufacturer's instruction complete all as specified and directed. Note: Water proofing compound shall be measured & paid separately.
Material and labour for rendering 10 mm thick on internal surface of brick work or concrete surfaces in cement mortar 1:6 and finishing the surfaces even and fair without using extra cement complete all as specified and directed.
Material and labour for rendering 5 mm thick on internal surface of brick work or concrete surfaces in cement mortar 1:3 and finishing the surfaces even and fair without using extra cement complete all as specified and directed.
Supply only liquid water proofing compound complete.
Material and labour for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.
Material and Labour for complete removal of existing treatment and scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cleaning of any mortar drops, fungus efflorescent salts etc on ceiling complete all as specified and as directed.
Material and labour for cutting or uprooting grass on old mud phuska, removing rubbish off the premises, cleaning surface and preparing to receive new cement mortar plaster complete all as specified and directed.
Material and labour for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time to dry the putty surface.
Material and labour for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).
Material and labour for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltr(unndiluted) /10 sq mtr diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as specified and directed. Make - Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty).
Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Notes: Applicable for Ser item No 10 to 13 (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill.
Material and labour for applying one coat of oil emulsion distemper on old plastered surface of walls including preparation with using auto roller for making the surface unfirom complete all as specified and directed.
Material and labour for preparation of old plastered surfaces and applying one coat of white wash complete all as specified and directed.
Material and labour for preparation of old painted wood or wood based surface of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for prepration of old painted steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint over roof sheet building height 6 to 9 mtr complete all as specified and directed.(spray painting)
Material and Labour for applying french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including one or more coats on old work complete all as specified and directed.
Supply and fix in repair 15mm bore brass chromium plated fancy type bib cock with wall flange screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Supply and fix in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed completed all as specified and directed.
Supply and fix in repair CP towel ring fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 90 gms) all as specified and directed.
Supply and fix in repair 125mm dia CP grating doom with waste hole for waste pipe (minimum weight 40gram) complete all as specified and directed.
Supply and fix in repair for powder coated mild steel drapery rod of 20mm inner dia (in lengths as directed) of approved colour with and including decorative final at both ends and pair of powder coated mild steel brackets fixed at both ends fixed with PVC rawl plug and steel screws on walls/beam complete all as specified and directed.
Supply and fix in repair chromium plated fancy type peg set fixed with PVC rawl plug and steel screws on walls complete all as specified and directed.
Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness of size; hacking out old putty or removing beads etc., including making good breakages in taking out and handling removing to store or stacking for re-use complete all as specified and directed.
Supply and fix of 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.
Supply and fix in repair 110mm dia PVC (SWR) pipe single socket in any length with rubber ring joints fixed to wall with stack clamp complete all as specified and directed.
Supply and fix in repair of 110mm dia PVC (SWR) bend any radius complete all as specified and directed.
Supply and fix in repair of 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.
Taking up or down water pipe tubing of 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Supply and laying of 32mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/celing or laying in floors including cutting through walls together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions etc.) and fixing complete with clips, wall hooks, wooden plugs, complete all as specified and directed.
Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.
Use & waste of form work to soffit of suspended slabs such as roof slabs, floor slabs, landing & similar works not exc 200 thick (horizontal or sloping) complete all as specified and as directed.
Material and labour for TMT bar 10mm dia, cut to length, bent to required shape, including cranking, bending spirally for hooping for columns, hooking ends & binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Material and labour for reinforced cement concrete (nominal mix) type A1 1:1.5:3 (20mm graded stone aggregate) as in chajja complete all as specified and as directed.
R K ENGINEERING ASSEMBLE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .