PROVN OF GATE ALONGWITH WALL AROUND BLDG No. OWT-353, PROVN OF HARDSTANDING NEAR BLDG No. OWT-354, SPECIAL REPAIR TO LED LIGHTS AT ARMY SQN AND PROVN OF WATER SUPPLY AND CONNECTED WORKS NEAR GUARD POST IN ZONE II AT LIKABALI MIL STNS UNDER GE 872 EWS

Amount

B/R SERVICES/WORKS

Surface Dressing not exc. 15 Cm Deep in Soft/ Loose Soil and getting out, complete all as specified and as directed.

Surface Excavation not exc. 30 Cm deep and ave. 15 Cm deep and getting out in Soft/Loose soil, complete all as specified and as directed.

Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out as in Soft/ Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed.

Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point, complete all as specified and as directed.

M&L Hardcore Broken Stone or Boulders, gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and well rammed to a True surface, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) in Coping, Bed Plates, Benching, Bed Block, Kerb Stones, etc. including necessary Formwork and Weathering, slightly Rounded or Chamfered Angles and Throating, complete all as specified and as directed. NOTE : Cost of Formwork shall deem to be included in the Quoted Unit Rate.

M&L Cement Concrete 1:4:8 (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including necessary Formwork, complete all as specified and as directed. NOTE : Cost of Formwork shall deem to be included in the Quoted Unit Rate.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Foundation including Rafts, Footing, Foundation Beams for Column Basement Slab, under Reamed Piles, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appro-priate Items.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Columns, Pillars, Posts and Struts, etc., complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appro-priate Items.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Bends, etc., Rounded or Chamferred, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items.

M&L Formwork to Sides of Concrete Foundations, Footings, Bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of Foundation and Plinth Beams; and Similar Work; Vertical or to Batter, Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to Sides of Pillars, Posts, Struts, Piers, Columns and Stanchions, Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work Half Brick thick with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan to any Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

M&L TMT Bars 10mm dia and Over, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8.0mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Rolled Mild Steel Framed Work as in Doors or Gates of Angle or Other Section with Gusset Plates, Rails, Braces, etc., drilled for fixing of Steel Sheeting or Other Covering. Doors, etc. to be prepared for hanging or sliding with and including either Hooks and Hinges or Steel Hanging Door Fittings (exclusive of Steel Sheeting or Other Covering, Running Rails and Guides) and hanging; also fastening and fixing, conforming to Fe-410-W (Gde E-250), Quality A, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 75mm thick in Sub-base to Floors, etc., complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick as Base Course for laying Tiles on Flooring, etc., finished Concrete Surfaces Fair and Even, complete all as specified and as directed.

M&L Cement Concrete Industrial Tiles (1st quality and as approved) 15mm thick (Square/ Rectangular), Area of Each Tile exc. 0.09 Sqm but not exc. 0.18 Sqm in Floors, Treads of Steps, etc., Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.

M&L Granite (of any type) Tiles 20mm thick, Mmachine cut, Bedded and Jointed with Grey Cement Slurry and Pointed with White Cement with Admixture of Pigment to match the Shade of Granite Stone including Grinding and Polishing, fixing over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.

M&L Rendering 15mm thick on Bricks/Pre-cast Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:4 and Float/Top layer 5.0mm thick in Cement Mortar 1:4 including mixing WPC to Float/Top layer, finished Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured and Paid separately under appropriate Item.

Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (of approved Tint) over a coat of Alkali Resistant Priming Paint, complete all as specified and as directed.

M&L Preparing Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, fixing to Walls, complete all as specified and as directed.

E/M SERVICES/WORKS

M&L Taking down Unserviceable Sub-main Wiring from PVC Conduit/ PVC Casing Capping of any description, Making Good disturbed surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 and Providing Surface Treatment (White/ Colour Washing, Distempering, Painting, etc.) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Point Wiring with 2.5 Sqmm (nominal area) FRLSH 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core Copper Conductor Cable with 2.5 Sqmm (nominal area) FRLSH 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6/16 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Sub-main Wiring with 2-Run of 4.0 Sqmm (nominal area) FRLSH 1100 Volt PVC insulated unsheathed multi-stranded Single Core Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) FRLSH 1100 Volt PVC insulated unsheathed multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Conduit (ISI marked) of suitable size (approx 20/25mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc, complete all as specified and as directed NOTE :- (a) Cost of 3-Run of Cables & 1-Run of PVC Conduit will deem to be include in the Quoted Unit Rate and the same will be Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Conduit only. Wires required for Looping, etc. as ordered will deem to be include in the Quoted Unit Rate. (c) Sub-main Wiring will have to be fixing upto 10.00 Metre Height in Hanger.

M&L Sub-main Wiring with 2-Run of 6.0 Sqmm (nominal area) FRLSH 1100 Volt PVC insulated unsheathed multi-stranded Single Core Copper Conductor Cable and 1-Run of 6.0 Sqmm (nominal area) FRLSH 1100 Volt PVC insulated unsheathed multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Conduit (ISI marked) of suitable size (approx 20/25mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc, complete all as specified and as directed NOTE :- (a) Cost of 3-Run of Cables & 1-Run of PVC Conduit will deem to be include in the Quoted Unit Rate and the same will be Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Conduit only. Wires required for Looping, etc. as ordered will deem to be include in the Quoted Unit Rate. (c) Sub-main Wiring will have to be fixing upto 10.00 Metre Height in Hanger.

S&F Switch Socket Combination 6/16 Amp, 3 Pin, 2-in-1, Multi-plug, Flush type, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Miniature Circuit Breaker (MCB) 6 Amp to 32 Amp, Single Pole with rating 240 Volt, 10 KA 'C' Curve, providing Electric Connection and Fixed-in-repairs, complete all as specified and as directed.

S&F Miniature Circuit Breaker (MCB) 10 Amp to 32 Amp, Single Pole & Neutral, 'C' Series, 50 Hz, 10 kA, 240 Volt, providing Electric Connection and Fixed-in-repairs, complete all as specified and as directed.

S&F Miniature Circuit Breaker (MCB) 63 Amp, Triple Pole & Neutral, 'C' Series, 50 Hz, 10 kA, 240 Volt, providing Electric Connection and Fixed-in-repairs, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 2-Way, SPN, 240 Volt, Single Door, Epoxy Based Powder Coated Painted, suitable for mounting MCB DP/SPN, Connecting Cable Links and Connecting up including Taking down/ out Unserviceable MCB DBs of any description, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 8-Way, SPN, 240 Volt, Double Doors, Epoxy Based Powder Coated Painted, suitable for mounting MCB DP/SPN as Incomer and MCB SP as Out-going with 200 Amp rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up including Taking down/ out Unserviceable MCB DBs of any description, complete all as specified and as directed.

S&F Vertical Sheet Metal Enclosure for DB's when MCBs to be used 4-Way, TPN, 415 Volt, Double Doors, made out of CRCA Sheet, Dust & Vermin Proof, Epoxy Based Powder Coated Painted, suitable for mounting MCB DP/SPN as Incomer and MCB SP as Out-going with 200 Amp rated Copper Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up including Taking down/ out Unserviceable MCB DBs of any description, complete all as specified and as directed.

S&F Highbay LED Luminaire 120 Watt with PDC Housing, Ceiling (Surface/ Suspended) mounting with System Efficiency upto 150 lm/w, 240 Volts AC Supply, fixing to Hangers of 10.00 Metre height, Connecting up with and including 3 Core Flexible Copper Conductor Cable of suitable Size and Length Taking down/out Unserviceable Light Fitting of any description from any Situation, complete all as specified and as directed.

Supply and Laying or Fixing or Passing through Pipe, 1100 Volt grade Heavy duty Cable with PVC insulated Aluminium Stranded Conductor served with an Inner sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and Overall PVC sheathed, Nominal Cross section 10 Sqmm, 4 Core in Service Connection, complete all as specified and as directed.

Supply, Installation & Commissioning Bus-bar Chamber of Size not less than 500x500x300mm, Outdoor type, Double Doors, made out of 16 gauge Mild Steel Sheet, Weather Proof, having Epoxy Powder coated Paint, mounted on Mild Steel Angle Iron Frame 32x32x6mm (Legs 04 No.) 75 CM long, Mild Steel Angle Iron Frame Painted with Two coats of Black Enamel Paint over a coat of Red Oxide Zinc Chrom Primer, Grouting the Legs in Cement Concrete 1:2:4 (20mm graded aggregate) including necessary Earthwork, Formwork, Providing Electrical Connections to Bus-bar Chamber and Testing, complete all as specified and as directed, comprising of the following Accessories :- (a) Aluminium Bus-bar 50 Amp, 2-Strips, 10 CM Long - 01 Set (b) MCB 16 Amp, SPN, 10 kA, 'C' Series - 01 No. (c) Starter suitable for 2.0 HP Motor - 01 No.

Supply, Installation & Commissioning LT Feeder Pillar Box, Factory Made (CPRI Approved/ Tested Manufacturer), made out of 3.15mm thick CRCA Sheet, suitable for 415 Volt, 3 Phase, 4-Wire System, 50 Hz Supply, Outdoor type, Platform mounted of Size 600x500x450mm, Dust Proof and Vermin Proof (IP54), Epoxy Powder coated, Front & Rear Opening, Double Door Shutters with Locking Arrangements, Feeder Pillar Box having Epoxy Powder coated, mounted on Mild Steel Angle Iron Frame 50x50x6.0mm and not less than 600mm Height from Natural Ground Level, grouting Angle Iron Legs in Cement Concrete 1:2:4 (20mm graded stone aggregate) Block of Size 300x300x600mm including necessary Formwork, Earthwork, expossed Angle Iron Frame shall painted with Two Coats of Synethetic Enamel Paint over a Coat of Red Oxide Zinc Chrome Primer, Providing all Electric Connections and Testing, Comprising with and including following Accessories including Taking down/out unserviceable Feeder Pillar Box of any description, complete all as specified and as directed :- (a) Copper Bus-bar 200 Amp, 4 Strip, installed on Porcelain/ Epoxy - 01 Set Insulators (b) MCCB 125 Amp, 4 Pole, 25 kA, 415 Volt - 01 No. (c) MCCB 63 Amp, 3 Pole, 25 kA, 415 Volt - 01 No. (d) Digital Amp Meter 0-200 Amp Square Flush Pattern - 01 No. (e) Digital Voltmeter 0-500 Volt, Square Flush Pattern - 01 No. (f) LED Indicator Lamp (RYB) in Incomming Phase - 01 Set (g) MCCB shall be provided with suitable Spreaders of Copper Conductor for fixing of Incoming Cables (h) Connection from MCCB to Bus-bars with Solid Copper Conductor

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.3mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with and including Galvanised Earth Strip of size 25x4.0mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) Light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion, complete all as per specified and as directed. NOTE : All Joints should be joined by Exothermic Welding or Brazing.

Dismantling Cross Arms, Mild Steel Channel, Angle Section, Flat Iron, Mild Steel Rod, etc., complete all as specified and as directed.

M&L Cross Arms, Bracings, Supports, Clamps and Back Plates, fabricated from Structural Steel Sections including Nuts, Bolts, Washers, etc., welding, bending cold or hot, drilling holes for Bolts, in any shape or size as indicated or directed and applying Two coats of Aluminium Paint over a coat of Red Oxide Zinc Chromium Primer after preparation of Surfaces, complete all as specified and as directed.

Excavating in Trenches, not exc. 1.50 Metre Wide and not exc. 1.50 Metre in Depth for laying of Water Pipe Lines, Cable Lines, etc., Forming Surfaces to required Foundation/ Gradient and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps with Surplus Soil along the Route of the Water Pipe Lines, Cable Lines, etc., in soft/loose soil, complete all as specified and as directed.

M&L XLPE insulated, armoured heavy duty, Electric Cable with Aluminium Conductor, 1100 Volt grade, Cross-sectional area 50 Sqmm, 3½ Core, laid in Trenches / Ducts or Passing through Pipes or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earth works, Sand cushioning, Bricks, GI Cable Protection Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L Sand Cushioning (dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be Measured.

Supply & laying Sub-class ‘B’ Bricks of Size 230x115x75 mm, Kiln burnt, for Covering to UG Cable as Protection, laid Flat, Transversally Width Equal to the Length of the Cable, complete all as specified and as directed.

M&L Galvanised Steel Tubing Pipe 50mm bore (dia), Light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed.

M&L UG Cable Route Indicator, comprising of Mild Steel Round Bar 20mm dia as Leg 50 Cm long and welded to Mild Steel Plate 5.0mm thick having 100mm dia for Writing LT and Name of Feeder, fixing with and including necessary Cement Concrete 1:2:4 (20mm graded Stone aggregate) Block of size 25x25x30 Cm, grouting in Natural Ground along the Cable Route including necessary Eart Works (as per Site requirment), complete all as specified and as directed. NOTE : Cost of necessary Earth Works shall deemed to be included in the Quoted Unit Rate.

M&L Boring Mannualy operated Machine Method upto 50mm dia Cast-in-situ of Piles 25 Metre Depth in Soil, getting out and Disposal of Spoil to a distance not exc. 50.00 Metre, complete all as specified and as directed.

Supply & Laying/ Fixing Steel Water Tubing 25mm bore (dia), Galvanised, ‘Medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply & Laying/ Fixing Steel Water Tubing 40mm bore (dia), Galvanised, ‘Medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

S&F Gun Metal Globe/Gate Valve 25mm bore (dia) with Iron Wheel Head, ISI marked, conforming to IS:778, screwed both Ends for Iron Pipe, complete all as specified and as directed.

M&L Gun Metal Non Return Valve 25mm bore (dia), having ISI Marked and Testing, complete all as specified and as directed.

M&L Gun Metal Non Return Valve 40mm bore (dia), having ISI Marked and Testing, complete all as specified and as directed.

M&L Water Filter not less than 2.50 Metre Long, made out of GI Pipe 40mm bore (dia) having Holes of Standard Size including Wraping of Plastic Net suitable for Filter the Ground Water and Providing Check Nut, etc., complete all as specified and as directed.

Supply, Installation, Commissioning & Testing Self Priming Monoblock Pump Set 1.5 HP capacity, suitable for 230 Volt AC supply, 50 Hz with all Accessories, complete all as specified and as directed.

Supply, Installation, Commissioning & Testing Booster Automatic Pressure Control Pump 0.5 HP with all Accessories, suitable for Home, complete all as specified and as directed.

M/S S.P. ENTERPRISES

AFTAB ENTERPRISES

M/s PRABIR ENTERPRISE