Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹12.7 L
EMD Value
₹31,700
Closing Date
2 Nov 2026, 4:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Rural Development and Panchayat Raj Department
SHWETHA M S
REPAIRS OF THE KITCHEN AND TOILETS, PROVIDING AND FIXING ROOFING SHEETS AT THE PRE-MATRIC BOYS HOSTEL, KIKKERI (BCWD859) K.R.PETE TALUK.
RDPR/2026-27/BD/WORK_INDENT29792
RDPR/2026-27/BD/WORK_INDENT29792
Open
Buildings
Two Tender Document System(Two Cover)
RDPR Division Office Mandya
7 documents required · 7 mandatory
The Tenderer shall have valid Class-IV and above KPWD Licence.
Annual Turnover Certificate in all classes of Civil Engineering works only for last Five Financial years ie., 2021-22, 2022-23, 2023-24 2024-25 and 2025-26 Certified from Charted Accountant with compulsory UDI number Profit and Loss, balance sheet shall be enclosed
Reports on the financial standing of the tenderer such as profit and loss statements and auditors reports for the last five years
GST Registration and Returns for the year 2026-27 GSTR-3B
List of existing commitments and ongoing work
List of works for which tenders already submitted
Name and Address of Contractor for Communication
₹500
₹31,700
17 Oct 2026
17 Oct 2026
3 Nov 2026
31 Oct 2026
REPAIRS OF THE KITCHEN AND TOILETS, PROVIDING AND FIXING ROOFING SHEETS AT THE PRE-MATRIC BOYS HOSTEL, KIKKERI (BCWD859) K.R.PETE TALUK.
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall inclu...
polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...
Providing and fixing brass bib cock of approved quality : 20 mm nominal bore
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...
Providing and fixing brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 25 mm nominal bore
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same with CM 1:4 et...
Providing & fixing upvc ventilator with Exhaust Turbo speed fan with 5 blades (300mm x 300 mm & above sized fan) with copper motor having mounting arrangements as per direction of Engineer i...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT_17_2026-27.pdf
Others - Notification • 0.48 MB
KW1-GEN 2026-27_29792.docx
Tender Document • 1.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .