PROVN OF SECURTIY FENCING RECONSTRUCTION OF SECURITY WALL AND CONSTR OF 3 NOS ELEVATED SENTRY POST AT AKHNOOR UNDER GE N AKHNOOR

Excavation in post holes each not exceeding 0.5 cum getting out in any type of soil, removing surplus soil to a distance not exceeding 50m, complete all as specified.

Plain Cement Concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation of poles/struts etc including necessary form work and fair finish to exposed surfaces without using extra cement, complete all as specified and directed.

fixing only MS galvanised coated chain link fencing n exc 4.0Kg per sqm with size of mesh 50 x 50mm and thickness of wire n.exc 3.15mm including line wires including provision of binding wire and fixing to poles with TMT bars,screws/bolts,flat iron all as specified and directed. Note:TMT bars 10mm dia, flat iron,mild steel screws/bolts,shall be measured and paid seprately under relevant item

Supply only MS galvanised coated chain link fencing n exc 4.0Kg per sqm with size of mesh 50 x 50mm and thickness of wire n.exc 3.15mm including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and directed.

Mild steel angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc). Including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Supply only TMT bar, 10mm dia and over, for support/line wire to chain link fencing complete all as specified snd directed

Supply ony flat iron confirming to Fe-410-W (Gde-E-250) complete all as specified.

Supply only Mild steel screw bolts 11-15mm dia at neck, machine made, with hexagonal or square heads at one end and screwed the other, or screwed both ends; each screwed and to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 15cm long, complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description under 10cm width and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or lying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc, (each line wire to be measured) fixed in repair complete all as specified

Concertina coil 600mm dia / 56 loops / 2.5 mm core wire, Coil Diameter: 600 mm, Type of Strip: Heavy Galvanised (IS:1703), Type of Core wire: Heavy Galvanised (IS:280-2006), Core wire Diameter: 2.50 mm Dia, Zinc Coating to Strip: Minimum 200 GSM/sqmm, Zine Coating on wire: Minimum 275 GSM/sqmm (IS 6745-1972 reaffirmed 2006), Tensile Strength of wire 1400-1500 N /sqmm, Weight: 6-8 Kg (± 5%), Number of Loops: 56. Blade Length: 22 MM, Barb Profile: Medium Blade (MBBT), Distance Between Barb. 35 mm, Stretchable length 6-8 mtrs, Type of clip: Hardened Steel in Galvanised steel, complete all as specified & directed. Note: Measurement of concertina coil during payment shall be done as per "Weight ascertained by BOO". to be commanded by GE

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundation including getting out in any type of soil complete all as specified and directed.

Form work to sides of concrete foundations, footings, basis of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to better with rough finished surfaces of concrete complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface of square rectangular or polygonal concrete all as specified and directed.

Reinforced cement concrete Design Mix (M-25), (using 20 mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Reinforced cement concrete Design Mix (M-25) (using 20 mm graded crushed stone aggregate) in Columns, pillars, piers, posts and struts complete all as specified and as directed.

TMT bar, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified.

TMT bars, 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified.

05mm thick cement plaster with cement mortar(1:4) on fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement, complete all as specified.

Granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like including pointing in white cement (1:2) using marble dust with admixure of pigment to match with shade of granite over and including 15mm thick screed of CM 1:4 after applying cement slurry@3 kg/sqm of cement per sqm, complete all as specified. (Note : A hole shall be drilled in the Granite after fixing for gas pipe all as directed).

Mild steel framed work as in door or gate of angle or other section with gusseset plate rail braces complete drilled for fixing of steel sheeting or other covering . Door etc to be prepared for hanging of sliding with grills, grating etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, conforming to Fe-410-W(Gde-E-250) quality-A, complete all as per approved drg submitted by the contractor.

Returining filling in including spreading, levelling, watering and wall ramming in layers not exc 25cm in any type of soil complete all as specified and directed.

Removing surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed .

PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in parapet, coping,troughs and like weathering,slightly rounded or chamfered angles and throating etc including necessary form work all as specified and directed

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for including removal complete all as specified and directed.

Dismantling structural steel works/cast iron of any description complete all as specified and directed.

Brick work with sub class 'B' bricks , straight or curved on plan exc. 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

Rendering 15mm thick cement plaster with cement mortar(1:6) on other than fair faces of brick work or stone masonry surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Excavation over area not exceeding 1.5 m including getting out in any type of soil complete all as specified and directed.

Excavation over area exceeding 1.5 m and not exc 3m deep including getting out in any type of soil complete all as specified and directed.

Form work to fair faces of walls, retaining walls, abutments, Parapets and staircase railings and similar work including attached pillasters, buttresses etc vertical or to better with fair finished surface of concrete complete all as specified and directed

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and as directed.

150 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joint laid intrenches or in floor all as specified and directed

Excavation in tranches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying cable including getting out in any type of soil complete all as specified and directed.

Construction of Double story elevated sentry post including connected items with permanent specification and in RCC framed construction. complete all as specified and shown on drg CEUZ/WD/AR-07 B/2019 Sh 1/2 , CEU

Surface excavation n exc 30cm deep and averaging 15 cm any type of soil all as specified and directed.

Hard core of broken stone/boulders of gauge n exc 63mm deposited spreed and leveled in layers n exc 15cm thick watered and rammed to a true surface, complete all as specified.

100mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor/hardstanding etc, finishing surface even and rough to receive topping layer, complete all as specified and directed

Sand cushioning in flooring below interlocking tiles laid in layers 25mm thick complete all as specified and directed.

Machine pressed precast concrete interlocking paver block of any shape and size confirming to marked IS:15658-2006 60mm thick, M-35 grade , in paths and hardstanding,with grey cement and coloured pigment, laid tightly over and joints filled with dry sand. (Colour and pattern as approved by GE) complete all as specified and directed.

one light point/fan point controlled by one switch

One 3 pin 5 amps socket point controlled by one 6 amps switch on independent board .

One 3 pin 5 amps socket point controlled by one 6 amps switch on same board .

Modular type socket shuttered type 6 Amps- 2/3 Pin combined 2 module,240V,AC ISI Marked Complete all as specified and directed.

Ceiling fans complete with blades, down rods, and accessories, 230 volt, 1200mm sweep, min air delivery 210 CFM with service value 6 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and directed.