REPAIR TO VARIOUS SECURITY FENCING, BARBED WIRE AND OTHER MISC WORK IN E1 AND E2 AREA UNDER GE(WEST) MATHURA

Amount

Demolition of Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.

All as per item No 02.00 (here-in-before) but except bricks.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. complete all as specified and as directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished surface fair and even complete all as specified and as directed.

M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished surface fair and even complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of exterior emulsion APEX of Dark Shade on wall, over a coat of primer complete all as specified and directed.

Dismantling mild steel work of any description and in any position complete all as specified and directed.

M&L for Mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, matching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in repair galvanized 2 strands steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixed to any shape/type of standard posts, straining bolts, including screwing or tightning at crossing with and provision of galvanized mild steel wire staple or steel pins etc (Note : Each line of wire to be measured separately) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described not exc 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted surface and applying one coat of exterior emulsion APEX of Dark Shade on wall, complete all as specified and directed.

M&L for Preparing old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for cutting grass, bushes, wild grouth(after cutting the remaining grass should not more than 100mm from ground level) to entire satisfaction of Engineer-in-Charge and removal of grass, bushes and deposited as and where directed by Engineer-in-Charge

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from natural ground and making good disturbed ground complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

S&F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but nexc 10cm long and diameter of neck in mm 5 to 10 complete all as specified and directed.

M&L for PCC (1:3:6) type B-1 using 20mm graded stone aggregate as in bed plates of vertical steel posts etc and similar works including necessary form work complete all as specified and directed.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any n. exc 4 Kg/Sqm complete all as specified and directed.

Supply only Chain link MS galvanisd fencing of any mesh size or type complete all as specified and directed.

Fixing only chain link fencing including line wires of any mesh size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S&F mild steel flat iron as in hold fasts, wind ties etc and similar small work confirming to Fe-290 Gde E-165 complete all as specified and directed.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.

M&L for 75 mm thick Cement concrete type D-2, (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for sand filling under floors or in foundation complete all as specified and directed.

M&L for 60mm thick Machine pressed precast inerlocking paver block rubber moulded of drak shade/double charged/ultra charged and any shape and size conforming to IS 15658-2006 of M-35 Grade complete all as specified and directed.

M&L for pre-polished chequered tiles (any colour) of size 30cm x 30cm x 25mm thick, with gray cement & pigment set, jointed and pointed in neat cement slurry in floors laid over and including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed.

M&L for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throating complete all as specified and directed.

M&L for brick work with sub class 'B' brick on edges walls (less than Half brick) thick buit in CM (1:4) complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-1, using 20 mm graded stone aggregate as in surface channels or drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement, including forms, moulds, mitered/stopped end etc. complete all as specified and directed.

Racking out cement joints to brick work in walls or bricks on edge in floors, surfaces channels, roofs etc. complete all as specified and directed.

M&L for Keyed pointing in CM (1:3) to brick-tile fecing, with tiles laid flat in stretcher course complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position such as precast manhole cover or cover slabs of septic tank etc (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for providing precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar (1:4) complete all as specified and directed.

M&L for TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

SHAKSHI ENTERPRISES

Deepak Saxena

sai construction co.

Ahmed constructions

CHOPRA ENTERPRISES

B S ENTERPRISES

Ms Kamal Kant Agarwal

M/S YATENDRA SINGH

ARCHI ENGINEERS