REPAIR TO EXHAUST FANS, CEILING FANS AND GEYSERS AT UPPER CAMP AND LOWER CAMP AT AF STATION UDHAMPUR

Amount

Taking down carefully aluminum/copper point wiring (light/ fan/socket or power) complete with fittings such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCBs, Main switches from control board and making good disturbed surfaces of walls, floor to match with existing specifications complete all as specified.

Point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through & including PVC, rigid concealed conduit, heavy duty, 19/20mm dia, ISI marked, with and including new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.

Point wiring for one 6 Amps socket outlet independent controlled by one switch with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through & including PVC, rigid concealed conduit, heavy duty, 19/20mm dia, ISI marked, with and including new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.

Point wiring for one 16 Amps socket outlet independent with PVC insulated, unsheathed FRLS multi stranded copper conductor 2.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through & including PVC, rigid concealed conduit, heavy duty, 19/20mm dia, ISI marked, with and including new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 2.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.

Socket shuttered outlet 2/3 pin, 6 Amp modular type, 2 modules complete all as specified and as directed.

Socket shuttered outlet 2-in-1, 6/16 Amp modular type, 2 modules complete all as specified and as directed.

Switch modular type, 16/20 Amp, one way, one module conforming to IS-3854 complete all as specified and as directed.

Switch modular type 6 AMP,one way , one module conforming to IS-3854 complete all as speciifed and as directed

Ceiling rose, surface bakelite 65 x 50mm, two to three terminals complete all as specified and as directed.

Modular electronic fan regulator 2 modules rotary step type 230 volts complete all as specified and as directed.

Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade cable as earth wire, including suitable size of PVC conduit drawn through PVC surface/concealed conduit and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of one RM of 4.00 sqmm main cable and one RM of 4.00 sqmm cable earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade cable as earth wire, including suitable size of PVC conduit drawn through PVC surface/concealed conduit and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of one RM of 6.00 sqmm main cable and one RM of 6.00 sqmm cable earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

All as per Sl item No 11 above but of size 10.00 sqmm (nominal area) and of size 10.00 sqmm (nominal area) 1100 volts grade cable as earth wire. Note : Two runs each of 10.00 sqmm main cable and one RM of 10.00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running meter for payment purpose.

Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade cable as earth wire,drawn through existing PVC surface/ concealed conduit and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of one RM of 4.00 sqmm main cable and one RM of 4.00 sqmm cable earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade cable as earth wire,drawn through existing PVC surface/ concealed conduit and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of one RM of 6.00 sqmm main cable and one RM of 6.00 sqmm cable earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade cable as earth wire,drawn through existing PVC surface/ concealed conduit and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of one RM of 10.00 sqmm main cable and one RM of 10.00 sqmm cable earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

Sheet metal enclosures for DBs SPN 2 way (when MCBs to be used) flush mounted including taking down existing unserviceable DBs /board /box including accessories therein and disposing off complete all as specified and directed. Make:Legrand/HAVELLS / Schneider

MCB SPN 40 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including taking down existing old unservicable including accessories therein & disposing from site complete all as specified and as directed. Make:CAT PART NO:408618 of Legrand or equavalent to HAVELLS / SIEMENS/Schneider

MCB SP 6-32 Amps, 240 Volts, having breaking capacity 10 KA, 'C' characteristic including taking down existing old unserviceable including accessories therein and disposing from site complete all as specified and as directed. Make : CAT PART No 408618 of Legrand or equivalent to HAVELLS/ SIEMENS/ Schneider

Taking down the complete ceiling fan/exhaust fan/wall fan of any type/size from different locations for repairs and fixing back after repairs at proper locations complete all as specified and directed. (Repairs & spares shall be measured and paid separately under respective item of BOQ) Note : All repairs/servicing/rewinding work shall be carried out in MES store yard.

Cutting of all copper coils & taking out burnt/damaged wire from 1200mm sweep ceiling fan motor of any make and M&L for rewinding of ceiling fans motor of any make with super enameled copper winding wire of appropriate size/same gauge as original including packing insulating material, soldering, varnishing, assembling and testing complete all as specified

Cutting of all copper coils & taking out burnt/damaged wire from 1400mm sweep ceiling fan motor of any make and M&L for rewinding of ceiling fans motor of any make with super enameled copper winding wire of appropriate size/same gauge as original including packing insulating material, soldering, varnishing, assembling and testing complete all as specified

Standard ball bearing for 1200mm sweep ceiling fan size suitable for different makes of fans of approved quality including necessary greasing. Make : NBC/SKT/NORE

Standard ball bearing for 1400mm sweep ceiling fan size suitable for different makes of fans of approved quality including necessary greasing. Make : NBC/SKT/NORE

S&F in repairs bush gun metal suitable for ceiling fans 1200/1400 mm sweep/exhaust fan 300 to 400 mm sweep, cabin fan of any make any size complete all as directed at site.

S&F in replacement of old unserviceable armature shaft for ceiling fans of 1200/1400 mm sweep of any make complete all as specified.

S&F in repairs down rod 30 cms long made out of heavy grade M.S pipe with necessary threading at both ends, holes as required matching with existing & painting for size of ceiling fan 1200mm/1400 mm as all directed by Engineer-in-Charge. Make :- Orient/Usha/Khaitan or as directed by GE.

S&F in repairs down rod 60 cms long made out of heavy grade M.S pipe with necessary threading at both ends, holes as required matching with existing & painting for size of ceiling fan 1200mm/1400 mm as all directed by Engineer-in-Charge. Make :- Orient/Usha/Khaitan or as directed by GE.

S&F in repairs rubber bushes and real synthetic rubber with 14.5 mm hole suitable for fan hooks for hanging of ceiling fans all directed by Engineer-in-Charge.

S&F in replacement nuts, bolts & washers with clamp with complete set of appropriate size for hanging of ceiling fan all directed by Engineer-in-Charge.

S&F in replacement blade made out of aluminium suitable for any make and sweep size with existing colour, set of three for one ceiling fan as directed at site by Engineer-in-Charge.

S&F in replacement upper & lower canopy made of good quality PVC of required size complete set for ceiling fan with tightening screws all directed by Engineer-in-Charge.

S&F in replacement condenser/capacitor suitable for 230 volts single phase for ceiling fan/exhaust fan/cabin fan/pedestal fan of capacity 2.5 mfd including necessary connection complete all as specified.

S&F in replacement condenser/capacitor suitable for 230 volts single phase for ceiling fan/exhaust fan/cabin fan/pedestal fan of capacity 3.15 mfd including necessary connection complete all as specified.

S&F in replacement condenser/capacitor suitable for 230 volts single phase for ceiling fan/exhaust fan/cabin fan/pedestal fan of capacity 4 mfd including necessary connection complete all as specified.

S&F in replacement for providing three core 23/.0076 with copper conductor ceiling fan to ceiling rose and making connection complete all as specified and directed by Engineer-in-Charge.

Painting one coat of synthetic enameled paint by spraying to ceiling fans of any type in MES store yard including preparation to old painted surfaces by filling cavities etc and overhauling by providing correct grade of lubricant oil/wheel bearing grease complete including making/writing of MES No all as directed by Engineer-in-charge. Note: Painting of fans shall be carried out in MES stores Yard.

S&F in replacement exhaust fan frame cover made out of M.S sheet of any make and size as per existing exhaust fan with suitable size of nuts, bolts & washers complete all as specified and directed by Engineer-in-Charge.

Cutting of all copper coils & taking out burnt/damaged wire from exhaust fan motor of any make and M&L for rewinding of exhaust fans of 450 mm sweep with super enameled copper winding wire of same size, gauge & weight including varnishing & insulating complete all as specified and directed.

Description all as per Srl item No. 39 here-in-before but 380/350mm sweep.

Description all as per Srl item No. 39 here-in-before but PVC fresh air fan.

S&F in replacement of super quality louver shutters made out of aluminium for 450mm sweep exhaust fan of any make all as specified & directed.

Description all as per Srl item No.42 here-in-before but for 300/380mm sweep exhaust fan.

Taking down geysers of any type and any capacity due to rusting of bolts/seepage of wall and re-installation at any location including S&F in repairs of heavy duty pin type fastener 4” long and making necessary inlet/outlet electric & water supply connections from existing source to geyser complete all as specified and as directed.

S&F in repairs heating element, cup (round) type, 1.5 KW 230 volts, ISI marked suitable for 25/50 ltrs geysers of any make complete all as specified and as directed. Make : USHA/Bajaj/Recold/Venus.

S&F in repairs heating element, tikona type, 1.5 KW 230 volts, ISI marked suitable for 25/50 ltrs geysers of any make complete all as specified and as directed. Make : USHA/Bajaj/Recold/Venus.

S&F in repairs heating element, cup (round) type, 2.00 KW 230 volts, ISI marked suitable for 25/50 ltrs geysers of any make complete all as specified and as directed. Make : USHA/Bajaj/Recold/Venus.

S&F in repairs heating element, tikona type, 2.00 KW 230 volts, ISI marked suitable for 25/50 ltrs geysers of any make complete all as specified and as directed. Make : USHA/Bajaj/Recold/Venus.

S&F in repairs 7" thermostat switch for geysers of 25/50 ltrs capacity (ISI marked) complete all as specified and as directed. Make : USHA / Bajaj / Recold / Theta / Elcon.

S&F in repairs 11" thermostat switch for geysers of 25/50 ltrs capacity (ISI marked) complete all as specified and as directed. Make : USHA / Bajaj / Recold / Theta / Elcon.

S&F in repairs stainless-steel inner tank of minimum 20 gauge sheet rated pressure not less than 7kg/sqcm suitable for 25 ltrs capacity geysers (weight not less than 3.75 kg) as per sample complete all as specified and as directed.

S&F in repairs of stainless-steel inner tank of minimum 20 gauge sheet rated pressure not less than 7 Kg/sqcm suitable for 50 ltrs capacity geysers (weight not less than 5.25 kg) as per sample complete all as specified and as directed.

Supply and replacement of glass wool for geysers complete all as specified and as directed.

S&F in repairs base 09 Nuts assembly, compatible to existing geyser, with inlet and thermostat pipe with drain plug inclusive of clamps for holding the element with nuts, bolts and gasket complete all as specified and as directed.

S&F in repairs base 06 Nuts assembly, compatible to existing geyser, with inlet and thermostat pipe with drain plug inclusive of clamps for holding the element with nuts, bolts and gasket complete all as specified and as directed.

S&F in repairs indicator lamp for geyser of any type colour green & red complete all as specified and as directed. Make : Usha / Bajaj/ Crompton

S&F in repairs outer body of MS sheet not less than 20 gauge suitable for 25 ltr geyser with white synthetic enameled paint complete all as specified and as directed.

S&F in repairs outer body of MS sheet not less than 20 gauge suitable for 50 ltr geyser with white synthetic enameled paint complete all as specified and as directed.

S&F in repairs plug top 3 pin 15 Amp ISI marked complete all as specified and as directed. Make : SSK/CONA/FINE.

S&F in repairs bottom cover of MS sheet 20 gauge suitable for 25 ltrs capacity geysers and providing a coat of red oxide to inner surface and applying one coat of synthetic enamel paint by spray painting to outer surface complete all as specified and as directed.

S&F in repairs bottom cover of MS sheet 20 gauge suitable for 50 ltrs capacity geysers and providing a coat of red oxide to inner surface and applying one coat of synthetic enamel paint by spray painting to outer surface complete all as specified and as directed.

S&F in repairs brass non-return valve 15 mm bore ISI marked screwed both ends and connecting to iron pipe in repairs complete all as specified and as directed. Make : Neta metal works/Orient/Leader/Bir.

S&F in repairs 3 core PVC insulated copper cable of size 40/0.0076 multi stranded complete all as specified and as directed.

S&F in repairs safety plug confirming to relevant IS with washer suitable for 15 mm GI pipe suitable for 25/50 ltrs geysers complete all as specified and as directed. Make : Theta / Usha.

S&F in repairs of pressure relieving valve, confirming to relevant IS with washer suitable for 15mm bore GI pipe suitable for 25/50 ltrs geysers complete all as specified and as directed. Make : Leader/ Theta or ISI marked.

GI tubing medium grade of size 25mm bore ISI marked galvanized with all fittings such as bends, elbows, tees, check nuts, unions nipples etc for cold water pipe line complete all as specified and as directed including taking down old.

Description all as per item No 66 here-in-before but 20mm bore.

Description all as per item No 66 here-in-before but 15mm bore.

Painting of outer surface of 25/50 ltrs storage type water geysers after cleaning of dust & other organic/inorganic materials if any and applying one coat of synthetic enamel white paint by spray painting and writing MES No on the geyser complete all as specified and as directed.

S&F in replacement garden lights refer to the use of outdoor illumination for garden and public landscpaes for diffused lighting with high power LED as light sourece including excavation and fixing arrangement with 40mm dia and minimum 1.2mtr long MS black pipe and prewired of suitable size as directed by Engr-in-Charge. Make : Cat Part No BAMBOOBL8WLED757PSYMTOPC of Havells or equvalent to bajaj/philips/C&S

S&F in replacement post top lights refer to the use of outdoor illumination for main gates for symmetrical light distribution with high power LED as light source including fixing arrangement with base plate and suitable size as directed by Engineer-in-Charge. Make : Cat Part No LHDC11126099 of Havells or equivalent to Bajaj/ Philips/C&S

Franklyn termination multi pointed copper rod, 19/20mm dia and 500mm long with base plate of size 100x 100x 5mm fixed on top of roof of the building including drilling holes on copper strip and GI pipe as required for making system for attaching complete all as specified and as directed by Engineer-in-Charge on buildings having height upto 6 mtr. Make : Dhruva Note : The rates quoted shall be deemed to include for scaffolding, safety measures and insdurance of workmen etc. and nothing extra shall be admissible on this account.

Supply, laying , jointing and testing XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductors, 1100 volts grade of size 6 sqmm, 2 core laid on walls/ floors or in air with saddles and gutties complete all as specified and directed. Make : Gloster/ Havells/ CCI.

Supply, laying , jointing and testing XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductors, 1100 volts grade of size 10 sqmm, 2 core laid on walls/ floors or in air with saddles and gutties complete all as specified and directed. Make : Gloster/ Havells/ CCI.

Supply, laying , jointing and testing XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductors, 1100 volts grade of size 16 sqmm, 2 core laid on walls/ floors or in air with saddles and gutties complete all as specified and directed. Make : Gloster/ Havells/ CCI.

Disconnecting & taking up or down existing unserviceable flameproof point wiring/ Rotary Switch/ switches/ sockets of any description, any size and in any position from existing conduits and making good the disturbed surfaces to match the existing surfaces all as specified and directed.

Explosion proof point wiring for one light/bell/buzzer with 1.5 sqmm 1100 volts grade PVC FRLS insulated fire retradent multi stranded flexible copper conductor cable in and including ERW rigid steel conduit ISI marked with all flame proof conduit fittings and acessories fixed on walls/ ceiling with proper fixing arrangement including one number continuous run of 1.5 Sqmm PVC insulated fire retgar4dent solid copper conductor cable as earth continuity conductor fixed to earth terminal and metallic body of light fittings/ fan and socket etc complete all as suitable for Class Zone IE Ex II C for one light point controlled by one way switch, all as specified

Explosion proof point wiring for one 3 pin 16 Amps socket outlet independent with 2.5 sqmm 1100 volts grade PVC FRLS insulated fire retradent multi stranded flexible copper conductor cable in and including ERW rigid steel conduit ISI marked with all flame proof conduit fittings and acessories fixed on walls/ ceiling with proper fixing arrangement including one number continuous run of 1.5 Sqmm PVC insulated fire retgar4dent solid copper conductor cable as earth continuity conductor fixed to earth terminal and metallic body of light fittings/ fan and socket etc complete all as suitable for Class Zone IE Ex II C for one light point controlled by one way switch, all as specified

Explosion proof ratary switch single pole on and off with cable termination box of 10 Amps rating 230 Volts Class E EX II C suitable for Class I Zone, all as specified. Make : Sudhir/ Shyam

Flameproof non-integral wellglass luminaire epoxy finish LM6 aluminium alloy housing with heat resistant and toughened glass cover painted MS wire guard and eye bolt 250 Watt including all acessories pre wired with polycarbonate cover polyester resin encloser and central locking system, complete all as specified including taking down old. Make : CAT No SSPL/WG/1234 of Shyam or equivalent in sudhir Note : Control gear shall be measured and paid for separately.

Flameproof control gear box epoxy finish LM6 aluminium alloy housing including all acessories prewired with polycarbonate cover polyster resin enclosre and central locking system, all as specified and including taking down old. Make : CAT No SSPL/MCGB/180 of Shyam or equivalent in Sudhir

Taking down old DB and supply and fixing Flame proof with explosion protection MCB distribution board enclosre single pole & n]eutral 240 volts 8 way complete with appropriate size bus bar and neutral link suitable for class 1 Zone 1 & Ex IIC suitable for and including following accessories:- (i) MCB SPN 32 Amps with rupturing capacity 16 KA - 06 Nos (ii) MCB SP 06 Amps with rupturing capacity 10 KA - 04 Nos Make : Sudhir or equivalent in shyam.

Flame proof switch socket and plug combined in LM6 cable termination box in LM6, 16 Amps, 250 Voltgs, 2P+earth all as specified Make : CAT No SSPL/2C1010 of Shyam or equivalent in Sudhir

S&F in repair Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 25 Amps, 250 Volts, 2P+earth all as specified.

Taking down unserviceable hanger lights from the height of approx 10 to 15 mts from ground level including electric connectioins and supply and fixing hangers lights 200W RADIL LED LH09 Rugged LED mid bay and high bay for varied industrial applications, including necessary electric connection, complete all as specified and directed by Engineer-in-Charge. CAT No BAYBRITESAUCERHVP200WLED757SWBTOLTG of Havells or equivalent to Wipro/Philips/Crompton

KARAN TRADERS

DAVINDER SINGH

MAHAJAN TRADING CO

MOHAN LAL AND SONS

shivom builders

R K BUILDERS