Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹31.3 L+₹24,513.05 (0.79%)Rejected-Finance SEVA SADAN ROAD UPPER BAZAR RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L2 | Rejected-Finance Quoted amount is more than L1 | |
| 3 | L3₹37.6 L+₹6.4 L (20.7%)Rejected-Finance WZ 199 LAJWANTI GARDEN GALI NO 4 NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L3 | Rejected-Finance Quoted amount is more than L1 |
Tender Value
₹35.9 L
EMD Value
₹71,800
Closing Date
27 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Sahil Ratusaria, IDSE
Garrison Engineer Ranchi, 7th Club Road Ranchi, PIN-834001
SPL REPAIRS TO SINGLE OR LIVING BLDG NO P-89, PROVN OF 03 X TOILET AND 02 X BATHROOM NEAR BLDG NO P-181 AND PROVN OF 01 X 3 HP CENTRIFUGAL MONOBLOC PUMP AT NAMKUM AND KHOJATOLI AREA UNDER GE RANCHI
2023_MES_634413_1
8200/1525/E8
Open Tender
Civil Works
Item Rate
180 days
Ranchi
Class D Cat a (i)
6 documents required · 6 mandatory
₹500
GE Ranchi
₹71,800
Yes
29 Feb 2024
26 Dec 2023
29 Jan 2024
27 Dec 2023
27 Jan 2024
8 Jan 2024
Amount
Taking down complete existing treatment of roof/ parapet , Mud puska on roof /parrapet including plastering, brick tiles, stone slabs and leeping any thickness including removal etc complete all as specified and directed .
M&L Brushing neat cement slurry (3 Kg of cement per Sq M) mixed with chemical compound in the proportion, chemical compound SUPER LATEX of DR FIXIT of PIDILITE INDUSTRIES LTD, water & cement (1:4:7) or SBR LATEX of STP LTD or other equivalent as per manufacture instructions for bonding of old concrete surface to new concrete complete all as specified and directed. (NOTE: WPC will be measured and paid seperately.)
M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) mixed with integral waterproofingchemical PIDIPROOF LW mixed in proportion 200 millilitre per 50 Kg cement of DR FIXIT of PIDILITE INDUSTRIES LTD, or STP No 1 (LIQUID) of STP LTD in proportion 200 millitire per 50 Kg cement, as in padding, benching,Sunken portion etc on roof surface for corecting/making proper slope on roof, etc complete all as specified and directed
M&L Rendering 10 mm thick in cement mortar 1:4 on concrete / brick surfaces with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smooth without using extra cement over roof / sunken slab /wall complete all as specified and directed NOTE : water proofing liquid will be measured and paid seperately .
M&L Water proofing treatment on "Non Accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed. (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm (iii) Applying evenly tack coat of industrial 85/25 grade @ 1.2 kg/ Sqm. (iv) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction. (v) Applying a coat of bitiminous aluminium paint @ 100 Gram / Sqm over & incl a coat of hot air blown grade bitumen of grade 85/25 @ 1.2 Kg/ Sqm duly sanded over polymeric membrane complete.
Supply only water proofing compound (liquid),ISI marked.
S&F 4.80mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 sqm in each pane
S&F in repair Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as specified and directed
Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and directed
S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane.
S&F in repair 18/19 mm thick pre-laminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cupboard shutter, shelf, etc complete all as specified and directed
S&F steel windows with side hung shutters incl projecting type hinges with one no MS flat iron 25x3 mm of appx 200mm length and two nos MS Tower bolt 150mm long and one peg stay on each leaf complete with glazing bars, dovetailed or welded complete all as specified and directed.
M&L machine cut kota stone slab flooring 18-20mm thick over & including 20mm screed bed in CM 1: 4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
S&F 2nd class hardwood plain fillets, square, rectangular or rectangular in section, clean sawn secured with nails sectional area exc 13 & n exc 25 Sqcm complete all as specified and directed.
S&F in repairs15mm dia pillar tap cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed
M&L marble work of any shade 16 to 18mm thick in cooking platform, steps, windowcills, etc over and incl 15mm thick cement screed bed in CM 1:4 laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab incl rounding of slab & demolition of old slab where directed complete all as specified and directed
S&F in repair vitreous china wash hand basin(Oval shape) white, flat back, size 580x450 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling
Material and Labour for reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in slabs supported on walls, beams and columns, in floors, roofs, landing and in shelves, chajjas etc including removing rubbish off the premises complete all as specified and directed.
M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6, complete all as specified and directed
M&L Half Brick thick wall with sub class 'B' bricks built in CM 1:4, complete all as specified and directed.
Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete all as specified and directed.
M&L 10mm thick rendering on fair faces of bk /concrete surfaces in cement mortar (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed.
M&L rendering 15mm thick (10mm + 5mm)in CM 1:4 in two coats on fair faces of brick work , finished even and fair without using extra cement with WPC.
M&L rendering 05 mm thick in CM 1:3 on fair faces of concrete finished even and fair in ceilings
M&L complete removal of existing surface and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed
M&L three coat of white wash on newly prepared surfaces on ceilling , etc complete all as specified and directed.
M&L preparation of new plastered surfaces of walls and applying two coats of oil bound distemper on walls by machanical applicator, white or tinted over a coat of chalk whiting, complete all as specified & directed.
Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with 2mm thick wall care putty and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted complete all as specified and directed.
Demoliton of cement concrete in ground floor paving n exc 15cm thickness (below or above ground level), complete all as specified and directed.
M&L Cement concrete 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc, complete all as specified and directed.
M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed
M & L 40 mm thick PCC type B - 1, 1:2:4 using 20 mm graded stone aggregate as in flooring finish even & smooth using extra cement complete all as specified and directed
Supply only 38mm wide glass dividing strips, 3mm thick complete all as specified and directed
M&L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.
S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete all as specified and directed.
S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, seat cover of white colour complete all as specified and directed.
Material and Labour for dismantling of existing water closet after disconnecting the flush pipe, demolition of entire floor up to bottom of sunken portion, removing of debries, cleaning the top of RCC slab in sunken portion including pheripheral surfaces and plastered with 10mm thick cement & sand mortor (1:3) using WPC finished even and smooth w/o using extra cement cured properly and allowed to dry and applying two or more coats of epoxy resin/polymer modified cementatious coating like brush bond of Fosroc or equivalent both on floor and wall surfaces applied all as per manufactureres instructions and plastering the treated surfaces(after testing for water tightness) 15mm thick with CM 1:3 with WPC including providing 20mm dia GI spout with 300mm projection beyond outer face of wall complete all as specified and directed.
M&L cement concrete type E-2 (1:5:10) using 40mm graded aggregate as in sunken portion of toilets
M&L rendering 15mm thick in cement mortar 1:4 with water proofing compound 2% by wt of cement, finished even and smooth withot using extra cement in sunken portion complete all as specified and directed Note:- WPC shall be measured and paid separately
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M&L antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.
M&L joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed
M&L coloured ceramic glazed tiles 375x250x7mm/450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement
M&L joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.
M&L joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in, skirting, dado, etc incl 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed
Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) not exceeding 1.5 Sqm each incl stacking for issued under Sch of Credit.
All as per above item No 47 but exc1.5 Sqm but n.exc. 4 Sqm.
Taking down shutters of any description exc 1 Sqm & not exc 2 Sqm each, complete all as specified and directed
S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for op rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame ealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame complete all as specified and directed.
Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete all as specified and directed.
M&L treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each,
Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates, hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165
M&L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete all as specified and directed
S&F 30 mm thick 2nd class hardwood, factory made flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats.
S&F 35mm thick 2nd class hardwood glazed and skeleton shutters of any no of panels, divided into squares with plain, chamfered or rounded, mitred & rebated sash bars and prepared to receive glass, gauze etc edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for doors, etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (a). Sample of shutter can be seen in GE's office.
S&F Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks/wooden patti etc complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long, complete all as specified and directed
S&F Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long, complete all as specified and directed
S&F Aluminium anodised handles of extruded section and fixed 125 mm long, complete all as specified and directed
S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed, complete all as specified and directed.
S&F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed.
S&F 250 mm long mild steel sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed.
MS ordinary rat tail rod pattern springs 200mm, including roller and roller plate complete all as specified and directed.
M&L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer complete all as specified and directed.
M&L preparing old painted wooden surfaces of any description not otherwise described , over 10 cm in girth or width and applying one coat of synthetic enamel paint of approved shade complete all as specified and directed.
S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm
Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.
M&L reinforced cement concrete 1:2:4 type B1 using 20 m graded stone aggregate as in Beams, cantilevers, bressumm ers, lintels over 1.5m span etc complete all as specified and directed.
S&F TMT bars 8 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc complete all as specified and directed.
S&F in repair 3000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I
Taking up or down GI steel tubing in any position and connection including fitting, cleanings for reusing if any as specified and as directed for the following size :-
15mm bore
20mm bore
S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors etc complete all as specified for the following size :-
15mm bore
20mm bore
Refixing old galvanised steel tubes & connections on wall 15 mm bore complete all as specified for the following size :-
15mm bore
20mm bore
S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia, complete all as specified and directed. (Make : Jindal/Leader/Scico)
S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .
S&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .
S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed .
S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed complete all as specified and directed
S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed
S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as directed and specified.
S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag)
S&F CP towel rail, 20mm dia, D type,60cm long complete all as specified and directed.
S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete all as specified and directed. make-Parryware-slimline/ Commander-water bird
S&F in repair 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm complete all as specified and directed.
M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
Supply and fix PVC (SWR) pipes single socketed 75 mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed.
Taking down eaves gutter and rain water pipes (any size or pattern) including all fittings, heads shoes bend swan necks etc at any position (measure overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.
S&F PVC (SWR) pipe of 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F PVC (SWR) bends or shoe of 110 mm dia bore, complete all as specified and directed.
PVC (SWR) junction single, (Single T) 110 mm dia bore equal or unequal
M&L repairing broken edges of chajja's, roof projection, Fascias etc . In small widths/depths ( exposed area not exc 0.16 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , to match the exisitng surfaces incl removing debris , necessary scaffolding , etc all as specified and directed. (Note : Reinforcement if any provided shall be measured and paid separately)
M&L expanded metal n.exc 4Kg per square metre, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.
M&L taking down and repairs in patches(area n.exc 2.00Sq min each patches) to plaster/loose surfaces of concrete slabs in sun-shades, chajjas, fascia,shelves, cills, landings in cement mortar 1:4 /cement concrete 1:2:4 including all necessary arrangments for complete repairs complete all as specified and directed. (Note : Reinforcement/expanded metal if any provided shall be measured and paid separately)
M&L mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F 4 levers mild steel mortice lock vertical type size 100 mm in repairs etc complete all as specified and directed.
S&F in repair chromium plated 20mm conduit curtain rod with brackets ,stops rollers as approved design and fixed to wall complete all as specified and directed.
M&L wall care putty 2mm thick including necessay preparation or already prepared surface complete all as specified and directed.
Material and labour for Preparing previously treated plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L preparation of old decorated surfaces and applying one coats of weather paint (apex) over wall surfaces by machanical applicator, etc complete all as specified and directed.
M&L preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of sclaed paint and applying two coats of synthetic enamel paint over a coat of red oxide primer for change of existing colour complete all as specified and as directed.
Excavation in trenches n,exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil.
Returning/filling in including spreading, levelling, watering and well remming in layers n.exc 25 cm in hard/dense soil.
Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point.
M&L PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete etc, complete all as specified and as directed.
Material & labour for brick work with sub class ‘B’ bricks, straight or curved on plan, exc. 6 metre mean radius built in CM(1:4) as in half brick wall complete all as specified and directed.
Material and Labour for reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in slabs supported on walls, beams and columns, in floors, roofs, landing and in shelves, chajjas etc including removing rubbish off the premises complete all as specified and directed.
M&L rendering 15mm thick in CM 1:6 on concrete surfaces finished even and smooth without using extra cement .
M&L rendering 15mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cement .
Preparing newly plastered surfaces of walls and applying three coats of white wash.
M&L Preparing new plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD), over a coat of wall care putty all as specified including preperation of surfaces
M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and as directed.
M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in sub base of floorings.
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with ss wire staple, complete all as specified and as directed.
S & F 4 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as spd and directed.
M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165
M&L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete all as specified and as directed.
S&F 100mm size stainless steel butt hinges, medium weight, cold rolled complete with stainless steel screw etc, complete all as specified and as directed.
S&F 150mm long aluminium anodized, barrel tower bolts extruded section, complete all as specified and as directed.
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated type, complete all as specified and as directed.
S&F 15mm dia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed
S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) etc, complete all as specified and directed.
S&F health faucet of brass chromium plated with 1.00 mtr flexible tube and including holder, complete all as specified and directed.
S & F Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with and including chromium plated brass screws and wooden / plastic cleats
Supply and fix chromium plated brass Bib cock two way suitable for 15mm bore GI tubing and jet spray complete all as specified and directed.
Supply and fix chromium plated brass Bib cock suitable for 15mm bore GI tubing complete all as specified and directed.
S&F Vitreous China soap tray embedded in the wall complete all as specified and directed.
S & F chromium plated 15mm dia angular stop cock single way Make:Jaquar, all as specified and directed.
S&F PVC (SWR) pipes160 mm bore single socketed, in any length with rubber ring joints, laid in trenches, wall or in floors.
M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 160 mm bore pipe complete all as specified and directed
S&F in repair PVC bends any radius 75mm bore
S&F Bottle trap brass chromium plated for wash basins 32 mm with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.
S&F in 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.(Make : Jindal/Nezone/NTL/Bansal)
S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls .
S&F PVC connection of 15 mm size with PTMT nuts of length 450 mm
S&F Grating doom 125 mm dia with with waste hole of PTMT (mminium weight 40 gms)
Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240
M&L MS flat iron for wind ties for roof including securing bolts and all necessary drilling etc and similar work confirming to Fe-410-O or Fe-310-O
M&L for preparing new steel surface and applying two coat of synthetic enamel paint over a coat of red oxide
M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface.
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in bed block.
S&F Mild steel flat iron as in hold fasts, complete all as specified and directed.
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types, complete all as specified and directed.
M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 m graded stone aggregate as in landings, staircase slab, cover slabs(for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves and similar articles with plain faces.
M&L for providing formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished surface.
S&F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in positioncomplete all as specified and directed. (Make : Sintex/Polycon /Poly Tap )
S&F Gun metal 20mm bore globe or gate valves, with irn wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil, complete all as specified and directed.
M&L Sub base Cement concrete type D2, 1:4:8 (40mm graded aggregate) 75 mm thick.
M&L Providing, cement concrete type B1 (1:2:4) using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges
Taking down copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, pendents, regulators, sockets, light fittings, wooden boards, bell push, call bell, regulators etc (credit scheduled for above items should be made as per condition separately) and making good to disturbed wall and surface complete all as specified and directed.
M&L Point wiring using approved colour coding as per IS ( Red, black and green for single phase circuit ), with 1.5 Sq mm cross sectional area, single core, multi stranded copper conductor (FRLS) PVC insulated and sheathed electrical cable ISI Marked and including medium grade PVC conduit of dia not less than 20 mm and conduit accessories concealed in wall/surface including mild steel/pressed steel sunkun boxes (with earth dolly) dully painted with two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socktes etc including PVC insulated multi-stranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engr in Charge at site for the following:- Note - (i) Cost of cutting chassing and making good of disturbed surface all to match with existing surface deemed to quoted rates. (ii) Switch ,socket and regulator to be measured and paid separately in respective items.
Light point controlled by one piano type 5 amp switch complete all as specified and directed.
One Fan (Ceiling/Exhaust/Wall) point controlled by one piano type 5 amp switch and fan regulator complete all as specified and directed.
One 3 pin socket outlet, 5 Amps independent board complete all as specified & as directed. (Switch, socket shall be measured separately).
One socket outlet 3 pin 5 Amps on the same board controlled by separate switch. (Switch, socket shall be measured separately).
One light point controlled by two 2 way switches complete all as specified and directed.
All as per item No 156 here-in-before but with 2.50 Sq mm un-sheathed multistranded cable for one socket outlet 15 Amps independent including continuous copper earth wire, PVC insulated of 2.50 Sq mm size (Switch, Socket shall be measured and paid separately).
M&L switch piano flush type 6 Amps 240 volts single pole one way, complete all as specified and directed.
M&L switch piano flush type 16 Amps 240 volts single pole two way complete all as specified and directed.
M&L socket outlet 2 in 1 , 5 pin, 6 Amps 240 volts complete all as specified and directed.
M&L switch piano flush type 16 Amps, 240 volts one way, complete all as specified and directed.
M&L Socket flush type 6/16 Amps, 2 in 1, 240 volts complete all as specified and directed.
M&L ceiling rose surface bakelite, 3 terminal complete all as specified & as directed.
Taking down old unserviceable main switch/DBs/MCB DBs with MCB including making good the disturbed surface complete all as specified and directed.
M&L sheet metal enclosure MCB DB, SPN, 240 volts, 8 way, double door type grouting in wall in CM, making good of disturbed surfaces and matching with existing and electrical connections complete all as specified and directed.
M&L VTPN distribution board, 415 volts , 50 Hz, 04 way with 200 Amps rated bus bar, vertical double door type,IP 43 suitable for 100 Amps 4 pole MCCB as incoming and MCB SP as outgoings, fixed flush in wall and making good all disturbed surfaces in all respects and complete all as specified and directed.
Supply and fixing in replacement of MCCB, 4P, rated current 63 Amp, breaking capacity 16/18 kA thermal magnetic type and making electrical connection, complete all as specified and directed.
Supply and fixing MCB SPN, 240 volts AC 50 Hz, 32 Amps complete all as specified and directed.
S&F MCB SP 240 volts, 10 KA, C-Series 6 to 32 Amps complete all as specified and directed.
S&F MCCB 63 Amp 16KA three pole 415 Volts, 50 Hz with thermal magnetic release, fixed type complete all as specified and directed.
Taking down sub main wiring including batten /Conduit complete all as specified and directed.
M&L for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated,one run of unsheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm (FRLS) cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green
Supply and fixing LED light fitting,4 feet ,1x20 watt 230 Volt, 4Feet slim body with reflector,drivers,LEDs Astra is a surface & wall mounted LED batten complete with all accessories including LED Tubes internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed including taking down old fitting.
Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completeand other connected accessories including service bracket of GI pipe 25/32 mm bore medium grade of length 0.9 mtr with MS clamps, bolts, nuts, and washers as per required at site and making electrical connection with Copper wire 2 core of 1 Sqmm and taking down old unserviceable light any capacity any type complete all as specifiedcomplete all as specified and directed and including taking down old fitting.
Supply and fixing LED study laight of 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Taking down of existing ceiling fan Fan from any height, opening and dismantling for greasing and painting of fans complete with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust writing MES No with black paint etc and hanging of fans at same location including clamp with nut/bolt and rubber bush of any make connecting up including provision of cable from ceiling rose to fan complete all as specified and directed.
S&F step type fan regulator electronic type ( flush type ) 240 volts and electrical connections complete all as specified & directed.
M&L providing earthing complete with GI earth plate electrode of size 60 cm X 60 cm X 6 mm thick burried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level, connected to 4 mm dia GI wire by means of bolts, nuts check nuts and washer of GI or steel all as shown in electrical plate No.3 of SSR Pt-I, connected to earthing main switch board/main board including necessary earthwork PCC 1:3:6 type C-1 chamber, precast RCC cover using XPM weighing not less than 4.00 Kg/Sq m in lieu of CI cover, 20 mm bore GI pipe (light grade) for watering and 15 mm bore GI pipe (light grade) for protection of earth lead etc. complete all as specified and directed.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20 W (4'), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz RPM 1200, Copper winding of sweep 300mm including mounting accessories complete all as specified and directed.Make- Havells/Crompton/ Bajaj. Note- cost for making holes for fixing of exhaust fan deemed to be includes in qouted rates.
Supply, fixing and testing Water heater storage type(Geyser) electric,capacity 25 litres ,230 Volts, 50 hzs, ABS Body, mounting vertical type suitable for 8 bar pressure , BEE 5 star rated , inner tank material ferroglass coating including mounting brackets with Fasteners,Multi-Function Safety Valve , Plastic Pipe (Flexi Pipes) with Adaptors (02 Nos) etc complete all as directed Make- Havells/Bajaj/RACold/ Usha Lexus
M&L for XLPE insulated heavy duty electric cable with aluminium multi stranded conductor of size 10 sq mm 4 core ,1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheather laying in trenches/cable ducts, fixed to wall/pole complete all as specified and directed.
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable, foundation etc, and getting out in soft /loose soil complete all as specified and directed.
Returning filling in including spreading, leveling Watering and well ramming in layers not exceeding 25cm complete all as specified and directed.
M& L for Spreading ribbed soil in trenches as in cable cushioning all as per IS 1255-1983 and as directed. Note :- Excavated approved soil shall be ribbed by using sieve to separate composite particles etc as per IS and refiiling in trenches before laying of cable 8 CM and 15 CM after laying of cable. This is than gently punned down to a depth of 10 cm above the top of upper most cable (ii) For the purpose of measurement only punned thickness only will be considered for paymet.
M&L laying bricks 'B' class over a cable (Width wise) old liad dried complete all as specified and directed.
Supply and fixing in replacement of GI tubing light grade of size 40 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc complete all as specified and directed.
Supply, installation, commissioning and testing of centrifugal pumping set with accessories, suction & discharge 50x40mm horizontal split casing pump with CI impeller , greater than or equal to two stage, electric motor driven not less than 2.2 KW/3HP, 3 phase, 415V, 50 Hz, 2800-2900 RPM for head of suitable capacity coupled on single base channel MS frame should be able to bear vibration/shock proof, pump of discharge capacity 245-450 LPM at greater than or equal to 15-20Mtr head including suitable DOL starter and all accessories i.e. base MS frame, coupling, coupling guard, foundation nut bolt washer & necessary PCC (1:2:4) foundation incl excavation work including all GI fittings and fixtures/flanges required to make the pump functional as per manufacturer specification. Make : Kirloskar/CG/ Havells
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded copper conductor 6 sqmm 3 core incl lugs andother accessories complete all as specified and directed
S&F NRV 50mm complete all as specified and directed
S&F Gate valve 50mm complete all as specified and directed
M&L construction of Brick masonary Valve chamber of size 900x900x900mm internal size suitable for valves with PCC 1:4:8 type D 2 for foundation and brick masonry wall in cement mortar 1:6 PCC 1:3:6 type C 1 for coping rendering in CM 1:4:15mm thick including Provn of mild steel sheet cover 3.15mm thick on 50x50x6mm angle iron frame work with two coats of synthetic enamel black paint over a coat of red oxide primer and locking arrangement including necessary excavation earth work complete all as specified and directed.
S & F GI Tubiing 40mm dia light grade for protection of cable under ground, road, pavement with all fittings complete all as specified and directed
Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out , returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering , and removing surplus soil to a distance no exv 50 m and making good disturbed surface
M&L PCC 1:3:6 type C2 as in foundation, filling and mass concrete
S&F MS framed work of square hollow section (45x45x4.5mm) FE 410-W (Gde E-250) quality as directed incl cutting, welding as per requirement complete all as specified and directed
Material & labour for preparation of new or previously untreated steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Material and labour for hardcore of broken stone or boulders of gauge n exc 63mm, deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed
M&L 50mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base for floor complete all as specified and directed
M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded aggregate for floor complete all as specified and directed.
M&L cement plaser 1:3 rendering 10mm thick on fair faces of brick work or concrete surfaces complete all as specified and directed
Cutting holes in brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete for fixing of suitable size of suction pipe 50/40mm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l and fixing with matching tiles as per existing complete all as specified and directed
M&L GI tubings medium grade 50mm with all fittings tee, bend, elbow socket, flange, union etc complete all as specified and directed
M&L GI tubings medium grade 40mm with all fittings tee,bend, elbow, socket, flange, union etc complete all as specified and directed
BUILDCON ENTERPRISES
M/S MSD & Associate
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .