Development and Improvement of Community Infrastructures at Low Income Settlement in Pondicherry Municipality, Puducherry._Package 6_ Sub Work _ Providing Electrification and Supply, Installation and Commissioning of 2 Nos. of LPG Crematorium to the

Amount

Supply, installation and commissioning of 2 No. of LPG crematorium including Transportation, Erection and Commissioning Charges, etc. complete as directed by the Engineer-in-charge and as per the specifications detailed below: i) Design, Supply & Construction of Cremation Chamber having the inner dimensions of 940mm ×1150mm × 2350mm and Outer Dimensions of1900mm X 3000mm X 2100mm, fabricated out of heavy duty material & provided with necessary openings for gaseous fuel firing through burners and feeding body. ---------------- xii) Supply of High Pressure venture Wet Scrubber for entrainment of particulate matters, removal of soluble emissions and sudden quenching of the emissions, fabricated out of mild steel . The emissions enter into the scrubber having high pressure water spray, thereby entrained particulate matter is washed down with water with the removal of soluble emissions and also helps in the reduction of the Emission temperature. This system is provided within built RCC/masonry water storage cum circulation Tank. Necessary powerful centrifugal Pump for Circulation of water will be provided with Pipeline. The rate includes all applicable taxes and overheads. (Refer NIT)

Engagement of one number of operator for LPG crematorium for a period of one year

Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil

Extra for every additional lift of 1.5m or part there of in excavation / banking excavated or stacked materials - all kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size

Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finsishing and reinforcement - All work upto plinth level 1:2:4 (1cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centring and shuttering including strutting, propping etc.and removal of form for:Foundations , footings, bases of columns ,etc. for mass concrete.-

Centring and shuttering including strutting, propping etc.and removal of form for: suspended floors, roofs, landings , balconies and access platform -

Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more

Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 coarse sand)

12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand)

15mm cement plaster on the rough side of single or half brick wall of mix - 1:4 (1cement : 4 fine sand)

Cement concrete flooring 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate

Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVCconduit , with piano type switch , phenolic laminated sheet , suitable size M.S.box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required - Group A

Wiring for light point / fan point /exhaust fan point /call bell point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed steel conduit , with pianotype switch , phenolic laminated sheet , suitable size MS boxand earthing the point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable etc.as required - GROUP B

Wiring for light point / fan point /exhaust fan point /call bell point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed steel conduit , with pianotype switch , phenolic laminated sheet , suitable size MS boxand earthing the point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable etc.as required - GROUP C

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface / recessed medium class PVCconduit as required - 2 X 2.5 sq.mm + 1 x 2.5 sq.mm earth

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor,single core cable in surface / recessed medium class PVC conduit as required - 2 X 4 sq.mm + 1 x 4 sq.mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2 X 6 sq.mm + 1 x 6 sq.mm earth wire

Supplying and fixing metal box of following sizes (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front including painting etc.as required- 250 mm x 300 mm x 100 mm

Supplying and fixing metal box of following sizes (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front including painting etc.as required- 200 mm x 150 mm x 75 mm

Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc.as required - 5/6 A switch

Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc.as required - 3 pin 5/6 A socket outlet, piano type ISI marked

Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc.as required - 2 way 15/16 A switch

Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc.as required - 6 pin 15/16 A socket outlet

Supplying and fixing 3 pin , 5 A ceiling rose on the existing junction box / wooden block including connection etc as required

Supplying and fixing PVC batten / angle holder including connection etc.as required

Supplying and fixing following way , single pole and neutral , sheet steel , MCB disribution board , 240 V, on surface / recess , complete with tinned copper bus bar , neutral bus bar , earth bar , din bar , interconnections , powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) - 12 way , double door

Supplying and fixing 5 A to 32 A rating , 240/415 V, 10 kA, 4 "C" curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete withconnections , testing and commissioning etc .as required. - Single Pole

Supplying and fixing 5 A to 32 A rating , 240/415 V, 10 kA, "C" curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete withconnections , testing and commissioning etc .as required. - Double Pole

Supply of 22 Watts LED tube light fitting , Make : Philips/Bajaj/Crompton

Supply of 9 Watts LED bulb, make Philips/Bajaj/Crompton

Installation , testing and commissioning of wall bracket ceiling fittings of all sizes and shapes containing upto two GLS / CFL /LED lamps per fitting . Complete with all accessories including connections etc as required

Supplying and laying of single phase connection wire 6.00 mm sqm weather proof multi stranded aluminium wire. Make orbit/kundan

Supply of stay wire(7/4.00 mm dia)

Supplying of exhaust fan 300 mm 1400 rpm heavy duty Make: Almonard/Orient/Usha

Installation of exhaust fan in the existing opening , including making good the damage , connection , testing, commissioning etc. as required - Upto 450 mm sweep

Supplying and drawing following sizes of FRLS / PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required -3 x 6 sq.mm