Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.3 LAccepted-AOC | ₹5.3 L | L1 | Accepted-AOC L1 |
| 2 | L2₹5.8 L+₹49,724 (9.40%)Rejected-AOC | ₹5.8 L+₹49,724 (9.40%) | L2 | Rejected-AOC L2 |
| 3 | L3₹5.9 L+₹62,151 (11.7%)Rejected-AOC | ₹5.9 L+₹62,151 (11.7%) | L3 | Rejected-AOC L3 |
| 4 | L4₹6.2 L+₹92,238 (17.4%)Rejected-AOC | ₹6.2 L+₹92,238 (17.4%) | L4 | Rejected-AOC L4 |
| Sl No | Description | Qty | Unit | SIVA SASVANTH ELECRICAL ENGINEERING L3 | KAVIN ELECTRICAL ENGINEERING L4 | RAJESHKANNAN T L1 | VEEKAY INDUSTRIES L2 |
|---|---|---|---|---|---|---|---|
| 1.01 | Isolation of well and dewatering with safety measure include of 60HP Sewage submersible motor from well, Dismantling pump, motor, impeller, oil chamber | 1 | No | 6,935.5 ₹6,935.5 | 7,288.4 ₹7,288.4 | 6,206.46 ₹6,206.46 Lowest | 6,789.73 ₹6,789.73 |
| 2.01 | Removing of stator winding from core ,cleaning using thinner, providing separate insulation (F Class)materials and rewinding with New Copper enamel insulation wire, making connections ,providing varnish, making End wire connections | 1 | No | 77,620.7 ₹77,620.7 | 81,569.9 ₹81,569.9 | 69,461.34 ₹69,461.34 Lowest | 75,989.17 ₹75,989.17 |
| 3.01 | Removing of top side mechanical oil seal in bottom chamber, Supply and fixing of new mechanical oil seal in bottom chamber and checking oil pressure using special equipment | 1 | No | 40,967 ₹40,967 | 43,051.3 ₹43,051.3 | 36,660.62 ₹36,660.62 Lowest | 40,105.91 ₹40,105.91 |
| 4.01 | Removing of bottom side mechanical oil seal, Supply and fixing of new bottom side mechanical oil seal in and checking oil pressure using special equipment. | 1 | No | 34,392.5 ₹34,392.5 | 36,142.3 ₹36,142.3 | 30,777.24 ₹30,777.24 Lowest | 33,669.62 ₹33,669.62 |
| 5.01 | Removing of old top side ,Bottom side bearings, supply and fixing of new bearing using suitable puller | 1 | No | 46,458.4 ₹46,458.4 | 48,822.2 ₹48,822.2 | 41,574.78 ₹41,574.78 Lowest | 45,481.89 ₹45,481.89 |
| 6.01 | Replacement of motor and pump side O-rings in suitable sizes | 1 | No | 2,362.8 ₹2,362.8 | 2,483 ₹2,483 | 2,114.45 ₹2,114.45 Lowest | 2,313.16 ₹2,313.16 |
| 7.01 | Supply and fixing of motor Terminal block and Suitable Lugs | 1 | No | 3,505.8 ₹3,505.8 | 3,684.1 ₹3,684.1 | 3,137.24 ₹3,137.24 Lowest | 3,432.07 ₹3,432.07 |
| 8.01 | Supply and fixing of motor profile Gasket | 1 | No | 3,491.5 ₹3,491.5 | 3,669.2 ₹3,669.2 | 3,124.48 ₹3,124.48 Lowest | 3,418.12 ₹3,418.12 |
| 9.01 | Dynamic balancing of shaft with impeller, making welding on corroded places of shaft, shaping and finishing work | 1 | No | 18,773.4 ₹18,773.4 | 19,728.5 ₹19,728.5 | 16,799.95 ₹16,799.95 Lowest | 18,378.78 ₹18,378.78 |
| 10.01 | Replacement of coolant oil in oil chamber using grade100/120 | 30 | 30ltrs | 161.5 ₹4,845 | 169.8 ₹5,094 | 144.53 ₹4,336.02 Lowest | 158.12 ₹4,743.51 |
Tender Value
₹6.2 L
EMD Value
₹6,223
Closing Date
27 Jul 2026, 3:00 pmClosed
The Commissioner Madurai Corporation
Aringar Anna Maligai, Thallakulam, Madurai.
Madurai Corporation Zone -2 Drainage pumping station motors repair work at various places meenabalpuram SPS 60HP ,Aruldosspuram SPS 20 HP ,Aruldosspuram lifting 10 hp
2026_MAWS_684107_1
E3/ EST NO 254/26-27
Open Tender
Civil Works
Lump-sum
Madurai
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹6,223
1 Sept 2026
11 Jul 2026
27 Jul 2026
11 Jul 2026
27 Jul 2026
11 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Isolation of well and dewatering with safety measure include of 60HP Sewage submersible motor from well, Dismantling pump, motor, impeller, oil chamber | 1 | No | - | - |
| 2.01 | Removing of stator winding from core ,cleaning using thinner, providing separate insulation (F Class)materials and rewinding with New Copper enamel insulation wire, making connections ,providing varnish, making End wire connections | 1 | No | - | - |
| 3.01 | Removing of top side mechanical oil seal in bottom chamber, Supply and fixing of new mechanical oil seal in bottom chamber and checking oil pressure using special equipment | 1 | No | - | - |
| 4.01 | Removing of bottom side mechanical oil seal, Supply and fixing of new bottom side mechanical oil seal in and checking oil pressure using special equipment. | 1 | No | - | - |
| 5.01 | Removing of old top side ,Bottom side bearings, supply and fixing of new bearing using suitable puller | 1 | No | - | - |
| 6.01 | Replacement of motor and pump side O-rings in suitable sizes | 1 | No | - | - |
| 7.01 | Supply and fixing of motor Terminal block and Suitable Lugs | 1 | No | - | - |
| 8.01 | Supply and fixing of motor profile Gasket | 1 | No | - | - |
| 9.01 | Dynamic balancing of shaft with impeller, making welding on corroded places of shaft, shaping and finishing work | 1 | No | - | - |
| 10.01 | Replacement of coolant oil in oil chamber using grade100/120 | 30 | 30ltrs | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
Doc.pdf
Tender Documents • 0.79 MB
BOQ_822355.xls
BOQ • 0.25 MB
corrigendum.pdf
PDF • 1.73 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .