BIRED/89/e-NIQ (1st call) of 2024-2025

Amount

Supply, Installation,Testing & Commisioning of Analog Addressable Intelligent multisensor detector ( VDS / UL / FM / ULC approved ) with inbuilt optical smoke sensors as well as additional heat detector sensor with decentralise intelligence, soft addressable Photothermal type with inbuilt fault isolator as per NFPA style 7 wiring complete with base having IP as per recommended standard.(Note : Detectors without built-in fault isolator is also acceptable but in such case one independent fault isolator module for every group of addressable devices has to be provided ( Numbers of addressable devices in a group will be as per latest recommended standards ) without any additional cost). (Approved Make: Notifer/Honeywell/Secutron) (With 3yrs Warranty)

Supplying, installation, testing and commissioning of Addressable Heat Detector (Fixed temperature cum rate of rise) with twist lockable removal base, built - in fault isolator, drift compensation feature etc including connections as per specifications complete as reqd and having IP as per recommended standard(Note : Detectors without built-in fault isolator is also acceptable but in such case the contractor shall provide one independent fault isolator module for every group of addressable devices ( Numbers of addressable devices in a group will be as per latest recommended standards ) without any additional cost)..(Approved Make: Notifer/Honeywell/Secutron) (With 3yrs Warranty)

Supplying, installation, testing and commissioning of LED type Response Indicator ( VDS / UL / FM / ULC approved) having 2 Nos. red coloured LED lamps including connections etc. (Approved Make: Notifer/Honeywell/Secutron) (With 3yrs Warranty)

Supply, Installation, Testing & Commissioning of Addressable Loop Powered Hooter ( sound output of minimum 90 db ) cum strobe (strength of light 10 cd)complete with inbuilt isolator & IP65 base and ( VDS / UL /ERTL/ LPCB / FM approved) approved. (Approved Make: Notifer/Honeywell/Secutron) (With 3yrs Warranty) Note : Hooter must be Addressable by itself or by using control module. If Loop Power Hooter is not used, separate wiring from control Panel upto the the hooter will be in contractor scope without any extra cost.

Supply, Installation,Testing & Commisioning of Addressable Manual Call Point ( VDS / UL / FM / ULC approved ) soft addressable type with in built fault isolator as per NFPA style 7 wiring complete as required.(Approved Make: Notifer/Honeywell/Secutron) (With 3yrs Warranty)

Supply, Installation, Testing & Commissioning of Loop Expander Modules in nexisting Fire panel to expand the loop ( VDS / UL /ERTL/ LPCB / FM approved ) etc complete as required. (Approved Make: Notifer/Honeywell/Secutron) (With 3yrs Warranty)

Supply, Installation, Testing & Commissioning of Control Modules (VDS / UL /ERTL/ LPCB / FM approved) for notification appliances (horns, Strobes, speaker, hooter etc) etc complete as required. (Approved Make: Notifer/Honeywell/Secutron) (With 3yrs Warranty)

Supply, Installation, Testing & Commissioning of Addressable Isolator Module for Isolating short/dewired/loose circuits with automatic resetting arrangement. Isolator base can be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get ready on activation to monitor the health status of the device. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. ( Approval standards : VDS/EN54/UL/FM/ULC/LPCB);(Approved Make: Notifer/Honeywell/Secutron) (With 3yrs Warranty)

Supply & Laying of 2 Core 1.5 sq.mm FRLS shielded copper Cable (For Loop) (Make. Finolex/RR Kable/Polycab ) with 20 mm NB PVC rigid conduit pipe(Make: Precision /AKG/ATUL /VIP/ Universal /BEC/Polycab) on the surface of the wall.

NOTE : 1. The Fire Alarm system shall comply with latest requirements of -- 2. National Fire Protection Association (NFPA) Standards. 1. IS 2189 3. NFPA 70 National Electric Code 4. NFPA 72 National Fire Alarm & Signaling Code 5. Local Statutory Regulations 6. Manufacturer Recommendation.

TESTS:1.The system shall be tested and commissioned by a qualified competent,trained engineer or technician authorized by the manufacturer of the fire alarm equipment to technically supervise and participate during all of the adjustments and tests for the system. 2. Before energizing the cables and wires, check for correct connections and test for short circuits, ground faults, continuity, and insulation and other tests as per above standards must be done. 3. The Commissioning Manuals, Tools , Dongles, USb Token, Software, or whatever is required for the Commissioning of the FACP, in whatever name it called must be handed over to the EIC, along with the passwords of the panel.

Terms and Condition i) The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. ii) Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill. iii) Intending tenderer must procure the materials from manufacturer/OEM. Authorization certificate should be issued by the personal not below the rank of Zonal head of that Particular company, so that standard warranty support of the Manufacturer/OEM is ensured. iv) If any refurbished material is supplied and installed, penal action will be taken as per existing rules.

Swarnendu Sarkar

TAPAN KUMAR SARKAR