SPECIAL REPAIRS TO BLOCK No 35 MES MD ACCN AND BLDG No XCVI UNDER GE WELLINGTON

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

Rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface, in ceiling of chajjas/ roof projection, etc finished even and smooth without using extra cement all as specified and directed Note: Rates shall be quoted inclusive of required scafolding for a height upto 10 meters buildings inclusive of working of item No 1 hereinbefore.

Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

Demolition of cement Concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level all as specified and directed.

Coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster as backing coat in cement mortar 1:3 on fair face of brick or concrete surface complete all as specified and directed.

Non Skid coloured ceramic tiles 7 to 8mm thick ( Square/Rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm as in floors etc., and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM 1:4 complete all as specified and as directed.

Non Skid coloured ceramic tiles 7 to 8mm thick ( Square/Rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm as in floors etc., and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM 1:4 complete all as specified and as directed.

Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in dado/ Skirting etc. and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be printed to match with printed sheet, reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing all as specified and directed.

Factory made solid panel PVC Moulded Door shutters 28 to 30mm thick (stile) but 2mm thick 3D wood grains moulded PVC sheet polyurethene painted on front face and 2mm prelam PVC sheet on front and back face with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face, supplying and fixing in frame at site as per specification and drawing.

Supply and fix UPVC Ventilator frame shall be made of PVC material conforming to IS 10151. of the ventilator frame of extruded UPVC section having over all dimensions 100 x 62 x 50mm having wall thickness 2mm (+) or (-) 0.2mm, corners of wall frame shall be joined by MS galvanised bracket joints mitred and plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thickness 1mm (+) or (-) 0.1mm and the tie rod sahll be provide at the bottom of the frame.The ventilator system should be glazed with 5.5mm thick glass of size as required in ventilator frame (louvered type) and stainless steel wiremesh fixed at outer side with frame as per manufacturer instructions including all fittings and necessary locking arrangements, complete all as specified and as directed.

Supply and fix factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardwar [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories of area not exceeding 2 sqm. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

Supply and fix factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories of area exceeding 2 sqm. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

Taking down Shutter of any description exceeding 1 sqm but not exceeding 2 sqm each all as specified and directed.

Mild steel Framed work such as grill, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters and simialr work conforming to Fe290 Gde E-165 all as specified and directed.

Butt hinges, 100 mm size medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

Extruded aluminium alloy handles 150 mm size, fabricated type, anodised complete all as specified and as directed

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long for door / window all as specified and directed.

Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

Supply and fix in repairs Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

2nd class hard wood wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

Taking down Shutter of any description exceeding. 1 sqm and not exceeding 2 sqm and refixing in the same opening each all as specified and directed.

Taking down Shutters of any description exceeding. 1 sqm and not exceeding 2 sqm all as specified and directed.

35 mm thick flush shutter, solid core construction, with block Board Core and plywood face panels covered with decorative Face Veneer on one faces with lipping / frame on one faces, complete all as specified and as directed.

Granite 20mm thick machine cut, as in floor bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in cement mortar 1:4 all as specified and directed.

Rounding to edges of stone/ granite slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

Demolition of cement Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

Reinforced cement concrete (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 at Sunken floor finished smooth and even without using extra cement incl using liquid integral WPC as per manufacturer instructions complete. Note: Supply of Integral water proofing compound will be measured and paid seperately.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including APP based polymeric membrane weighing minimum 3Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and as directed.

20mm thick cement mortar 1:4 screed mixed with liquid water proofing compound over APP membrane in sunken floor all as specified and directed.

Supply only liquid water proofing compound and all as specified and directed

40mm dia light grade GI spout at the lowest point with 30cm projection beyond the outer face of the wall in sunken floor all as specified and directed.

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, in sunken portion complete all as specified and directed.

Demolition and breaking up drain pipes of any description of 100mm size complete all as specified and as directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors or wall all as specified and as directed.

PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors or wall all as specified and as directed.

PVC (SWR) 110mm dia pipe single socketed in any length, with rubber ring joint fixed to walls with clamps complete all as specified and directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls with clamp, complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia complete all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia with access door complete all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia with access door complete all as specified and as directed.

PVC (SWR) branch piece single, (single Y) equal or un equal of 110mm bore of pipe complete all as specified and directed

PVC (SWR) branch piece single, (single Y) equal or un equal of 75mm bore of pipe complete all as specified and directed

PVC (SWR) branch piece, (double Y) equal or un equal of 75mm bore of pipe complete all as specified and directed

Stack clamps out of 50mm by 5mm by flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 75mm bore of pipe, complete all as specified.

Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 100mm bore of pipe, complete all as specified.

PVC (SWR) vent cowl of 75 mm bore of pipe complete all as specified and directed

PVC (SWR) vent cowl of 110 mm bore of pipe complete all as specified and directed

Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in cement mortar 1:6 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed

Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, fixed in repairs complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm dia and connections all as specified and directed

Taking up or down steel tubing and connections for 20mm dia and connections all as specified and directed

Supply, laying and testing steel water tubing of size 15 mm bore medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing and making good with all fitttings complete all as specified.

Supply, laying and testing steel water tubing of size 20 mm bore medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing and making good with all fitttings complete all as specified.

Vitreous china wash down water closet pan (pedestal pattern) white with P or S trap incl flushing pipe , seat and PVC seat cover (white) closed pattern with flat bottom & cover brass chromium plated hinging device, incl connection to drain and to flushing pipe, antisyhonage pipe etc and including fixed in repairs complete all as specified and directed.

PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including connecting to bracket fixed in repairs complete all as specified and directed.

Vitreous chian wash basin, white, flat back, size 550mm x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling / fittings 32mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32mm bore and of suitable length, 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Bib tap fancy type long body chromium plated 15mm dia complete including fixed in repairs all as specified and directed

Stop valves, fancy type, 15mm bore chromium plated with long shank and cup concealed type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair all as specified and directed

Stop valve cast copper alloy, 15mm bore screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated ,15mm bore including fixed in repair all as specified and directed

PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Chromium plated 125mm shower rose with or without swivel joint, size, including fixing to steel pipe or union, fixed in repairs complete all as specified and directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Sheet Glass shelves assembly corner consisting of 5.5mm thick sheet glass shelf 12cm wide with chroumium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix in repairs of Chromium plated soap dish complete all as specified and directed.

Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including fixed in repairs all as specified and directed.

PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed.

Gratings 125mm dia with / without waste hole, fixed in repairs complete all as specified and as directed.

Supply and fix in repairs of 20 mm dia anodised aluminium curtain road fixing with brackets all as specified and as directed.

Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and 5mm thick in cement mortar 1:4 over a coat of 10mm thick finished even and smooth without using extra cement, mixed with water proofing compound complete all as specified and directed.

Preparation of newly plastered surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over new surfaces complete all as specified and directed.

Applying two coats of oil bound distemper over a coat of primer over and including a coat of wall care putty in two layer, 3mm thick on newly plastered wall surface including preparation all as specified and directed.

Preparing surfaces, plastered or unplastered on new ceiling surface and applying three coats of white wash complete all as specified and directed.

Preparation of old treated wall surfaces, cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and treating oil and greasy spots etc and applying one coat of white wash complete all as specified and as directed.

Preparation of old treated ceiling surfaces, cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and treating oil and greasy spots etc and applying One coat of white wash complete all as specified and directed.

Preparation of old treated surfaces of walls including washing rubbing down and stopping of distempered / painted surface and applying one coat of distemper Oil emulsion washable on old surfaces on walls including filling and making surface smooth making good chipped off surfaces as required complete all as specified and directed.

Demolition of cement Concrete of any description and in any position including padding concrete and removing debris all as specified and directed.

Schedule of Credit (Minus) Rs. 30449.00 NOTE: Bidder shall insert credit amount of Rs. 30449.00 as rate in Green field under Col-5.

Please Enable Macros to View BoQ information