Repair and Renovation of washrooms (Ladies and Gents) of Administration Block-II at New University Campus Jammu

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material outside University Campus In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking at site. Of area 3 sqmm and below

Brick work using 2nd class common burnt clay building bricks in foundation, plinth and in super structure in cement mortar 1:6 (1cement: 6coarse sand) including cost of scaffolding, formwork etc. complete (All work upto floor V level).

Dismantling old plaster / tiles/ Chips already fixed on walls at site over which new tiles have to be fixed including racking out joints etc., disposal of dismantled material outside the University Campus.

Providing 40 mm thick cement concrete 1:2:4 (1 cement : 2 sand: 4 graded stone aggregate 20 mm nominal size) under flooring including machine mixing, curing etc. Complete.

Steel work welded in built up sections/framed work using structural steel including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac). In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Providing and fixing ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :35 mm thick including ISI marked anodised aluminium butt hinges with necessary screws, applying a coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac).

Providing and fixing glass panes with putty and nails including raking out old putty. Float glass panes of thickness 5.00 mm (weight not less than 12.50 kg/sqm).

10-15mm thick cement plaster 1:4(1cement: 4 coarse sand) in single coat on rough/fair side of single or half brick walls for interior/exterior plastering. All work upto floor V level.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO, SOMANY KAJARIA make in all colours/shade as approved by the Engineer-in-charge, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles of size 300x450mm conforming to IS : 13753 of minimum thickness 5 mm of approved make like NITCO, SOMANY KAJARIA make in all colours/shades as approved by Eningeer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete.

Removing dry or oil bound distemper by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Applying white cement based Putty of average thickness 1mm of approved brand & manufacture on wall surface to give an even finish

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. Complete. 200 x 10 mm

-----------do----------- 150 x 10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete. 125 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm

Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper

Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. Hardwyn make (Eddy) or equivalent

Providing and fixing PVC Drain Pipes (4 Kg/sqcm pressure) including cost of solution (Make Supreme/Finolex/Astral/Parkash Surya) 100 mm dia

------------do-------------- 75 mm dia

Providing and fixing PVC Reducer including cost of solution (Make Supreme/Finolex/Astral/Parkash Surya) 100 mm & 75mm dia

-----------do------------ 150 mm & 100mm dia

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Providing and fixing plain bend of required degree. (Make supreme/finolex/Prince) 100 mm

Constructing Manhole in Brick Masonary in cement mortar 1:4 (1 cement : 4 sand) including plastering with cement mortar 1:3 (1 cement: 3 sand) finished wth a coat of neat cement slurry including cost of frame and cover (C.I) of following sizes. size 300 x 300mm inside

-----------do-------------- size 600 x 600 mm inside

Providing and fixing PVC TEE (Make supreme/finolex/Prince) 100mm x 100mm x 100mm

-----------do------------ 75mm x 75mm x 75mm

Providing and fixing PVC double unequal plain junction of required degree 100x100x75x75 mm

Providing and fixing PVC Bend of following size (Make Finolex/Prince/Supreme) 75 mm/100mm outlet

Providing and fixing terminal guard: Sand cast iron S&S as per IS:1729 100 mm dia

---------------do-------------------- 75 mm dia

Providing and fixing heel rest sanitary bend: 100 mm dia.

Providing and fixing PVC floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm outlet

----------do---------- 100 mm inlet and 75 mm outlet

Providing and fixing G.I. pipes Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall (Parkash Surya/Jindal Make). 15 mm dia nominal bore

---------do------------- 20 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 25mm dia. nominal bore Internal work-Exposed on wall (Make Parkash Surya/Jindal)

Making connection of G.I. distribution branch with G.I.main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete.25 to 40 mm nominal bore

P&F of brass ball valve with handle complete (Make DRP/SHIP) 15 mm dia nominal bore

----------do------------ 20 mm dia nominal bore

-----------do------------- 25 mm dia nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) of approved make (ISI). 15 mm dia nominal bore

-----------do---------- 20 mm dia nominal bore

----------do------------ 25 mm dia nominal bore

Providing and fixing PVC clamps holder to the Existing Pies including cost of cutting holes and making good the walls etc For 100 mm dia pipe

-----------do------------- For 75 mm dia pipe

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone ggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design. Inside size 120x90 cm and 90 cm deep including C. I. cover with frame (medium duty) 500 mm internal diamensions total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg).With F.P.S. bricks with class designation 75 & withCrushed stone aggregate

Constructing brick masonry road gully chamber 45x45x77.5 em with bricks of class designation 75 in cement mortar 1:4 ( 1 cement: 4 fine sand) with precast R.C.C. grating complete with frame 450 x 100 mm vertical grating. With FPS Bricks

Providing and fixing square mouth S.W. gully trap grade 'A' complete with C. I. grating brick masonry chamber with bricks of class designation 75 and water tight C. I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 Kg as per standard design 100 x 100 mm size P Type with common burnt clay bricks.

Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. MD- 10 Square/Circular shape 450mm internal dimensions

Providing and Fixing of tank nipple 25mm of approved quality (ISI).

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm (Parryware/ Hindware /Cera/Jaquar Make).

Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan (Parryware /Hindware/ Cera /Jaquar Make).

Providing and fixing White Vitreous China Washbasin wash basin with M.S. brackets, including cutting and making good the walls wherever required. White Vitreous China Washbasin size 560 x 415 x 200 mm CNS-WHT-801 Wall hung wash basin with fixing accessories.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings CNS-WHT-301

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White (Cera /Hindware /Parryware)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin URS-WHT-132530 with fittings accessories of size 375 x 32x 620mm

Providing and fixing of branded curved shape urinal partition glass crome finish 8 mm thick JSE-CFR-8/OUC 450 x 1 with fitting accessories of size 900 x 450 mm

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

P&F CP Prysmatic Urinal Spreader with CP Rod (Jaquar Make)

P&F CP Grating 100 mm nominal dia of superior quality.

Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85gms (Make Prayag/Steelbull)

Providing and fixing PTMT bib cock of approved quality & colour.15 mm nominal bore, 90 mm long, weighing not less than 93 gms (Make Prayag/Steelbull)

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms (Make Prayag/Steelbull)

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 106gms (Make Prayag/Steelbull)

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. colour (Make Prayag/Steelbull)

P& F CP jet with PVC pipe to be fixed with WC of approved quality.

P/F of PVC waste pipe for sink or wash basin including P.V.C. waste fitting complete Semi Rigid Pipe 32/40 mm

P/F solid plastic seat with lid for pedestal type W.C. pan complete (Parry ware /Hind ware/ Jindal/Cera)White colour

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes (4 Kg/sqcm pressure) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes (Supreme /Finolex/ Prince /Astral Make). 100 mm dia

-----------do--------- 75 mm dia

Making cement concrete platform for Indian type WC in cement concrete 1:2;4 complete of size 36" x 36"x 12" including cost of material & labour complete.

Providing and fixing C.P towel rail including end brackets cost of wooden/PVC plugs with screw complete of size 600 x 20 mm of approved make (Cera/Hindware/Parryware).

P/F of unplasticised PVC connection pipe with bass union 45 cm length & 15 mm nom. bore.

Cleaning of manholes including cleaning of drain pipes from manhole to manhole for the making the lines fully functional & disposal of malba from the site as directed by the engineer incharge

Hire charges of welding set including the cost of welder with helper & welding rods complete

Supply of Labour for different works Mazdoor

-----------do-------------- Carpenter

------------do-------------- Fitter-II Class

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45gms (Make Prayag/Steelbull)

Rattan Chand

M/S RAVINDER KUMAR CONTRACTOR