COMPREHENSIVE MAINTENANCE AND REPAIR IN THE AOR OF POCKET NO. 9 UNDER GE (A) JAISALMER AT MIL STN JAISALMER

Amount

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed by Engineer-in-charge.

Taking down chowkats or frames exc 1.5 sqm but n.exc 4sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed by Engineer-in-charge.

Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified and directed by Engineer-in-charge.

Taking down shutters of any description exc 2.00 sqm each complete all as specified and directed by Engineer-in-charge.

Supply and fixing Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed by Engineer-in-charge.

S&F Pressed steel frames of size 125X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engineer-in-charge.

M&L for Second class hardwood glazed and skelton shutters 35mm thick, as in doors, open rebated and prepared to receive glass, gauze etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, clause 8.24(a) and fitted to chowkats, complete all as specified and directed by Engineer-in-charge.

S&F Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixedd with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc complete all as specified and directed by Engineer-in-charge.

S&F in repair stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixedd with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc complete all as specified and directed by Engineer-in-charge.

S&F 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-charge.

M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-charge. Note :- minimum thickness of powder coating 50 micron complete all as specified and directed by Engineer-in-charge.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engineer-in-charge. Note:- minimum thickness of powder coating 50 micron complete all as specified and directed by Engineer-in-charge.

S&F anodised aluminium window and ventilator shutters,powder coated side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer-in-charge.

S&F aluminium grill anodised (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed by Engineer-in-charge.

S & F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and directed by Engineer-in-charge.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 4.8 mm thick sheet glass, ordinary quality and glazing in squares exceeding 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-charge.

M&L for sheet glass plain 3mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-charge.

M&L for sheet glass plain 3mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane and including hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

S&F, 4.8mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each panes and including hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

S&F Aluminum anodised bow handle, bearing ISI mark, fabricated type extruded section of 150mm long complete all as specified and directed by Engineer-in-charge.

S&F Butt Hinges medium weight cold rolled mild steel, bearing ISI mark, 100 mm long complete all as specified and directed by Engineer-in-charge.

S&F aluminum aodised sliding door bolts, bearing ISI mark, 250mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engineer-in-charge.

S&F in repair, 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate, bearing ISI mark complete including necessary welding work complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint, first quality, over a coat of pink primer complete all as specified and directed by Engineer-in-charge.

S&F in repairs aluminum anodised barrel tower bolts of extruded section 200 mm long, bearing ISI mark, complete all as specified and directed by Engineer-in-charge.

S&F in repairs 150 mm over all length of cover plate of floor door stopper, bearing ISI mark, of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed by Engineer-in-charge.

S&F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-charge.

M&L for 09mm thick prelaminated particle board interior grade,one side laminated with decorative choice and other side balancing white lamination fixed with screws to timber frames work for shutters of ward robes ,cabinets etc complete all as specified and directed by Engineer-in-charge.

S&F steel rolling shutters, 1.00mm thickness of laths with out ball bearing, but gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, including taking down existing unserviceable rolling shutter complete all as specified and directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not othervise provided for complete all as specified and directed by Engineer-in-charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc in Fe-410-W(Gde-E-250) of quality B complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.

Dismantling of plain or corrugated steel sheets in roof coverings any type complete all as specified & directed by Engineer in charge.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) of any description, any thicknes including cover fillets and frame work etc, complete all as specified and directed by Engineer-in-charge.

S & F Anodised aluminium snap grid frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long incl dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engineer-in-charge.

S&F Exposed metal frame for false ceiling with 6mm thick calcium silicate board of siliceous and calcareous material reinforce with cellulose fibre for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed by Engineer-in-charge.

M&L for Providing and fixing Gypsum Board 12mm thick false ceiling fixed with screw as per manufacturers instructions and applying two coat of Oil bound distemper on ceiling surface over putty for desired smoothness and uniform levelling of surfaces in two or more layers for receiving painting complete all as specified and directed by Engineer-in-charge.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site including PVC frame complete all as specified and directed by Engineer-in-charge. Note :- PVC frame / fillet shall be measured and paid separately.

S&F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directed joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) complete all as specified and directed by Engineer-in-charge.

S & F in repair Vitreous china premium/1st quality urinal half stall type of white colour, of size 330x300x450mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union incl urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) complete all as specified and directed by Engineer-in-charge.

S & F in repair Vitreous china premium/1st quality wash down water closet pan floor mounting (Semi-pedestal pattern (Anglo Indian) white colour including CI S/P trap as directed including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete all as specified and directed by Engineer-in-charge.

S&F in repair Vitreous china premium/1st quality wash down water closet wall hung EWC (One piece) P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) complete and including taking down existing of any description/size complete all as specified and directed by Engineer-in-charge.

S&F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-charge.

S&F Flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed by Engineer-in-charge.

S & F in repair Vitreous china premium/1st quality wash basin, white, size 550x400 mm including all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC connection 450mm long and 15 mm dia with brass fly nut at both ends complete all as specified and directed by Engineer-in-charge.

S&F in repairs brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair 6mm thick of size 600x450 looking mirror fixed to wall with stainless steel plugs/connecter /spacers /screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position complete all as specified and directed by Engineer-in-charge.

S&F in repairs stainless steel plate rack of 600X750X250mm fixed to wall complete all as specified and directed by Engineer-in-charge.

S&F in repairs stainless steel sink with drainage board , made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of overall size 915x460mm bowl size 410x330x160mm complete all as specified and directed by Engineer-in-charge.

S&F in repairs stainless steel sink, made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-charge.

S&F in repair chromium plated shower rose 125mm round shape fancy type fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F 15mm bore steel water tubing medium grade, galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections complete all as specified and directed by Engineer-in-charge.

S&F 20 mm boresteel water tubing, medium grade, galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engineer-in-charge.

S&F in repairs HDPE PVC lid (tank cover) with locking arrangement for 500/1000 Ltrs capacity PVC tank complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm bore Brass CP basin mixer for mixing hot & Cold water screwed down for iron pipe complete all as specified and directed by Engineer-in-charge.

S&F in repair 15mm bore, fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank for iron pipe complete all as specified and directed by Engineer-in-charge.

S&F in repair, 15 mm bore, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.

S & F in repair angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete fixed as in repair in all respect all as specified.

S&F in repairs 15mm bore stop valves, cast copper alloy, chromium plated fancy type with long shank cup (Concealed type) screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified & directed by Engineer-in-charge.

S&F in repair tubular towel rail brass chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete complete all as specified & directed by Engineer-in-charge.

S & F in repair stainless steel grating 100x100 mm size square / rounded 100 mm dia with or without hole as per required shaped for floor trap fixed in position complete all as specified & directed by Engineer-in-charge.

S & F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed by Engineer-in-charge.

M&L for Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified & directed by Engineer-in-charge.

M&L for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified & directed by Engineer-in-charge.

M&L for Rotational moulded polyethylene water storage tanks of 2000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified & directed by Engineer-in-charge.

Disconnecting existing tanks (Exc 250 Ltrs but not exc 500 Ltrs capacity PVC water tank), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Note :- Cleaning repairing, etc. measured separately.

Disconnecting existing tanks (Exc 500 Ltrs but not exc 1000 Ltrs capacity PVC water tank), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Note :-Cleaning repairing, etc. measured separately.

Disconnecting existing tanks (Exc 1000 Ltrs but not exc 2000 Ltrs capacity PVC water tank ), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Note :-Cleaning repairing, etc. measured separately)

Cleaning and removing, Exc 250 Ltrs but not exc 500 Ltrs all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified & directed by Engineer-in-charge.

Cleaning and removing, Exc 500 Ltrs but not exc 1000 Ltrs all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified & directed by Engineer-in-charge.

Cleaning and removing, Exc 1000 Ltrs but not exc 2000 Ltrs all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified & directed by Engineer-in-charge.

S & F in repair, 20mm dia Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified & directed by Engineer-in-charge.

S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 455 gms) complete all as specified & directed by Engineer-in-charge.

M&L in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete all as specified & directed by Engineer-in-charge.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floors etc complete all as specified & directed by Engineer-in-charge.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floors etc complete all as specified & directed by Engineer-in-charge.

S&F in repairs PVC (SWR) bends 75mm dia any radius with access door complete all as specified & directed by Engineer-in-charge.

S&F in repairs PVC (SWR) bends 110mm dia any radius with access door complete all as specified & directed by Engineer-in-charge.

S&F in repairs PVC (SWR) junction single,(Single T) 75mm dia equal or unequal with access door complete all as specified & directed by Engineer-in-charge.

Dismantling of 100 mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required of any size.

Sand Cast iron soil, waste and vent pipes 100mm dia in any length with or without ears, with cement joints, Fixed to wall

S&F CI Bends 100 mm dia (any radius), diminishing pieces or tapers (larger bore measured)

Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified & directed by Engineer-in-charge.

Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified & directed by Engineer-in-charge.

M&L for 75 mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in subbase of flooring complete all as specified and directed by the Engineer-in-charge.

M&L for 25mm thk PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in floors & finishing the surface even & smooth without using extra cement complete all as specified and directed by the Engineer-in-charge.

M&L for Non Skid ceramic tiles colour tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) complete all as specified and directed by the Engineer-in-charge. Note : Work will be in patches or in bulk no extra will be paid.

M & L for Non-skid ceramic premium quality coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. laid over & including 15 mm thick screed in cement mortar (1:6) complete all as specified and directed by the Engineer-in-charge.

M & L for Single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as in approved shade, set & jointed in neat cement slurry, laid over and including 15mm thick cement screed bed in CM (1:6) and pointed in white coloured cement to match the colour of tiles, in floors etc. complete all as specified and directed by the Engineer-in-charge.

M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X300X7mm in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry laid over & including 10 mm thick rendering in cement mortar (1:4) as backing coat and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by the Engineer-in-charge.

Material & Labour for ceramic out door tiles 300mmx300mmx10mmm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement slurry, laid over & including screed bed or bedding layer of mortar 15 mm thick Cement Mortar 1:6 complete all as specified and directed by the Engineer-in-charge. Note : Work will be in patches or in bulk, no extra will be paid.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed by the Engineer-in-charge. Note : Work will be in patches or in bulk, no extra will be paid.

M & L for Granite of black / green / imperial red (colour as approved by Accepting Officer) of any type machine cut as in shelves/steps/counter tops, 20 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified and directed by the Engineer-in-charge. Note :- Single piece should be used in steps/cills/jambs/shelves.

M & L for Jaisalmer stone for wall cladding (of any type) 35-55 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone , exc .0.06 sqm but not exc 0.11 sqm ,including cutting and polishing types in wall including 20 mm thick CM 1:4 for laying Jaisalmer stone complete all as specified and directed by the Engineer-in-charge.

M & L for Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base , jointed and pointed with grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and polishing complete all as specified and directed by the Engineer-in-charge. Note : Work will be in patches or in bulk no extra will be paid.

M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10 mm thick cement plaster 1:3 jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by the Engineer-in-charge.

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by the Engineer-in-charge.

M&L for providing precast cement concrete (1:2:4) type B-1 (using 20mm garded stone aggregate) in copings. apex stones, columns, posts, boundary pillars, frame of jallies etc and setting in cement mortar (1:4) complete with joints to match complete all as specified and directed by the Engineer-in-charge.

M&L for 35mm thick precast cement concrete (1:3:6) type C-0 (using 12.5mm graded stone aggregate) as in louvers or jallies (measured solid), including all mouldings but excluding frame, set in cement mortar (1:4) including dismantling of Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed by the Engineer-in-charge.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc complete all as specified and directed by the Engineer-in-charge.

M&L for precast cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar (1:6) complete all as specified and directed by the Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed by the Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but except stone complete all as specified & directed by Engineer-in-charge. Note :- Serviceable stone obtained from demolition shall be used.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type brought upto courses complete all as specified and directed by the Engineer-in-charge.

Material and labour for flush pointing to squared rubble mansonry, uncoursed or brought upto courses in CM (1:3) complete all as specified and directed by the Engineer-in-charge.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by the Engineer-in-charge.

M&L for rendering 15mm thick in cement mortar C:M (1:4) in two layer (First coat 10 mm thick and second 5 mm thick floating coat) using liquid water proofing compound @ 3% by weight of cement in second coat and finished fair and even complete all as specified and directed by Engineer-in-charge. Note :- LWPC will be measured and paid separetly.

M & L for 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished fair & even without using extra cement complete all as specified and directed by the Engineer-in-charge.

Supply only integral liquid water proofing compound complete all as specified and directed by the Engineer-in-charge.

M&L for preparation of newly plastered surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed by Engr-in-Charge.

M&L for two coat of Oil emulsion paint over a coat of primer on ceiling surface including prepration of new surface with and including wall care putty on wall for desired smoothness and levelling of surfaces in two or more layers) for receiving painting complete all as specified and directed.

deepaktraders (BID ID -3145704)

S K TRADER (BID ID -3139020)

M/S MAYA CONSTRUCTION COMPANY (BID ID -3138049)