AGE I CGN 43 25 26 INTERNAL PERIODICAL SERVICES OF OFFICERS MD ACCN AT SEC-52 UNDER AGE (I) CG NOIDA

M&L for prepartion of old distemperd/ painted wall surface by washing down, rubbing and stopping including brooming down or steel wire brushing scrapping down smoke soot, moulds moss and efforescent salts and trading oil and greasy spots thereafter filling of holes and cracks with wall care putty to obtain an even and smooth wall surface and applying one coat of oil bound distemper with spray machine on wall surface including scaffolding arrangement, trestles, ladders complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing loose treatment by scraping with mechanical wall/ceiling by vacuum based sanding machine (sanding machine with internal dust extraction system & having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 inches / 9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology/auto roller all as specified and directed by Engineer-in-charge.

M&L for one coat of wall putty avg 1-1.5 mm thick on complete all as specified and directed. .

M&L for applying two coats of distemper oil emulsion, with spray machine on wall surface white or tinted over existing prepared putty base surface complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old plastered surfaces of wall thereafter filling of holes and cracks with wall care putty to obtain an even and smooth wall surface and applying one coat of white wash alongwith including scaffolding arrangement, trestles, ladders complete all as specified and directed by Engineer-in-Charge.

All as per item above here-in-before but two coat of white wash on wall/ceiling surface, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of old decorated wall surfaces and applying one coat of exterior grade emulsion paint as per manufacturer instruciton and as directed.

M&L for Preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces of steel of any description over 10cm width or grith and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces of steel of any description over 10cm width or grith and applying one coat of aluminum paint, complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof (In Patches ), area exceeding 1.00 Sqm but not exceeding 5.00 Sqm , which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using wall care putty to obtain even and smooth wall surfaces of that portion and using sand paper and than applying two coats of oil bound distemper over a coat of primer,including scaffolding arrangement, trestles, ladders complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 10 mm thick rendering with ready mix plaster on faces of brick or concrete wall surface, finished even and smooth complete all as specified and directed.

M&L for 5 mm thick rendering with ready mix plaster on faces of brick or concrete wall surface, finished even and smooth complete all as specified and directed.

Preparation of the newly plastered surfaces of walls/ ceiling and M&L applying two coats of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6 sqm/ltr over one coat of primer with and including 1mm thick wall care putty to prepare the surface even and smooth complete all as specified and directed by Engineer-in-charge

S&F as in repair corner sheet glass shelf assemble of size 225x225 mm with chromium plated bracket guard and railing , CERA Cat part No F5005102 or equivalent complete all as specified and directed.

S&F in repair ss toilet paper holder with flap complete all as specified and directed.

S&F in repairs of plastic WC seat cover white/ off white closed pattern with flat bottom end cover and mild steel CP hinging device complete all as specified and directed.

S&F in repairs, CP brass health faucet alongwith 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 litre capacity, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs,sink mixing valve 15mm dia, Hot and Cold CP brass fancy including joints to pipe or unions , including fittings, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, mixing valve 15mm dia, Hot and Cold CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin , including fittings, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, wall mixing valve Hot and Cold water Screwed Down for iron pipe 15mm dia CP brass fancy including joints to steel pipe or unions , including fittings for, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, Brass chromium plated shower rose 125mm size with arm, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, CP waste coupling 32/40 mm dia suitable for wash hand basin or kitchen sink complete all as specified and directed by Engineer-in-Charge.

S& F in repair staianless plate rack made of 0.8 mm thick stainless steel sheet of size 750 mm x 900 mm x 210mm consisting of 3 shelf for bowls and one shelf for keeping six nos of big utensil and seven nos of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre or as per drg and sample kept in GE"s office all as specified and directed by engr-in-charge complete.

S&F in repair PVC cabinet mirror size 400x500 mm complete all as specified and directed and equavanent.

S&F In repair 40/50 mm dia cup bord knobs fixed with nut ,screw and washer of aluminum all as specified.

M&L for rotational moulded polythylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut , tank nipple as required complete, screwd for iron pipe or brass ferrule size 25 mm bore including dismantling of water tanks of any type/pattern not exc 1000 ltr and removing from site of work.

M&L for rotational moulded polythylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut , tank nipple as required complete, screwd for iron pipe or brass ferrule size 25 mm bore. Dismantling of water tanks of any type/pattern not exc 1000 ltr and removing from site of work

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and directed.

M&L for Coloured glazed ceramic tiles in vertical surfaces 300x200x7mm/450x300x7mm thick set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick cement mortar 1:4 complete all as specified and as directed.

M&L for Coloured glazed ceramic tiles in vertical surfaces , area of each tiles exc 0.42 Sqm and Nexc 1.0 Sqm , 8-10 mm thick set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick cement mortar 1:4 complete all as specified and as directed.

M&L for Virified Ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. laid over 15mm thick cement mortar screed bed of CM (1:6) , set and jointed in neat cement slurry @ 3.00 kg per Sqm and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed by Engineer-in-Charge.

M&L for Virified Ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. over 10 mm thick CM (1:4) , set and jointed in neat cement slurry @ 3.00 kg per Sqm and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed by Engineer-in-Charge.

M&L for Non skid ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.11 sqm not exceeding 0.18, in floors etc. laid over 15mm thick cement mortar screed bed of CM (1:6) , set and jointed in neat cement slurry @ 3.00 kg per Sqm and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed by Engineer-in-Charge.

M&L for Non skid ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.11 sqm not exceeding 0.18, in skirting etc. over 10 mm thick CM (1:4) , set and jointed in neat cement slurry @ 3.00 kg per Sqm and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed by Engineer-in-Charge.

Disconnectiong existing tanks of capacity exc 500 & not exc 1000 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all the scale and dirt, etc from tank and from months of circulating pipes etc a complete all as specified and directed

Disconnectiong existing tanks of capacity of 1000 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all the scale and dirt, etc from tank and from months of circulating pipes etc a complete all as specified and directed

S&F in repairs for stainless steel door stopper 150mm long with double legged rubber bushes at the end complete all as specified and directed.

S&F powder coated anodised aluminium frame as in door , window, ventilator and shutter etc. with one or more rebates including joining cleat for fixing etc. fixed type/louvered/sliding window or ventilators without sash bar, aluminium including necessary joining cleat, glazing clips, rubber packing, anodised aluminium snapbeading, screw etc including dismentling old aluminium complete all as specified and directed by Eng-in-charge. Note: (a) Glazing shall be measured seperatly ; (b) Items shall be paid as per weight of of aluminium sections . (c) The rates quoted shall be inclusive of neoprene beading glazing clips , screws , etc as required whichshall not be measured for arriving the weight (d) The rate shall be inclusive of locking arrangement including complete all as specified and as directed

S&F in repair 4.8 mm thick sheet glass ordinary quality and glazing with Al glazing clips& EPDM beading in square exc 0.5 sqm in each pane

S&F in repairs 15 mm size brass chromium plated Two way angle valves and bip tap fancy type cast copper alloy, complete all as specified and as directed

S&F in repair tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges complete all as specified and as directed

M&L for running welding in repairs including cleaning and preparing surfaces for welding thickness of metal to be welded not exc 6mm such as MS butt hinges to MS frame, broken steel windows or ventilators, iron doors and similar work complete all as specified and directed.

S&F door seal of length 800-1200 mm to prevent insects entry fixed with screw complete all as specified and directed .

S & F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of perature 1.40mm and fixed with SS wire staples in door/windows and similar work all as specified and directed.

S&F in repairs stainless steel fodable towel rack 60 cm long and 24 cm deep with towel rail and hanger at bottom fixed to wall complete all as specified as directed.

S&F 600mm long PVC connection pipe fixed to 15mm dia bore pipe ,complete all as specified and as directed.

S&F in repair internal fitting for dual action flushing tank of capacity 10 litre including push buttons complete all as specified and directed

S&F Modular auto concealed soft closed hinges 35mm 110 degree size complete all as specified and directed.

S&F stainless steel handle 150mm complete all as specified and directed.

S&F PVC tape 18mm wide with adhesive complete all as specified and directed.

Dismantling of stone slab and tiles laid bedded and pointed in any mortar of any discription or thickness in floors

S&F granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone on 15 mm thick screed bed in C:M 1: 6 including grinding and polishing complete including grinding and polishing complete as in cooking platform.

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar situations