Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.9 LAccepted-AOC AIRPORT ROAD SKALZANGLING LEH LADAKH 194101 | LEH LADAKH | LADAKH | 194101 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹24.1 L+₹2.9 L (13.5%)Rejected-Finance H NO 1395 SECTOR 21 PANCHKULA 134112 HARYANA | PANCHKULA | HARYANA | 134112 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹26.5 L+₹5.3 L (25.1%)Rejected-Finance S 17 77 1 CHARAN NAGAR COLONY NADESAR VARANASI UTTAR PRADESH PIN 221002 | VARANASI | UTTAR PRADESH | 221002 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹32.2 L+₹11.0 L (52.1%)Rejected-Finance BUDOOBAGH NOWPORA 0 KHANYAR SRINAGAR JAMMU KASHMIR 190003 | SRINAGAR | JAMMU AND KASHMIR | 190003 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹33.8 L+₹12.6 L (59.7%)Rejected-Finance R O H NO 55 SEC D BHARAT NAGAR TALAB TILLO JAMMU 180002 | JAMMU | JAMMU AND KASHMIR | 180002 | L5 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | Top Mind Industries Pvt Limited L4 | R B TRADERS L2 | M/S NANCY ENTERPRISES L1 | Charan sales and Service L3 | M/S Chib Engineers L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply and fix in replacement LED down light (round, Cool white) of capacity 15 Watt, motion sensing based with 4.5 mtrs radius, 215 Volts complete all as specified and/or directed by Engineer-in-Charge. | 200 | Each | 2,150 ₹4,30,000 | 540 ₹1,08,000 | 250 ₹50,000 Lowest | 700 ₹1,40,000 | 1,200 ₹2,40,000 |
| 2.00 | Supply and fix in replacement LED street light fitting 35 Watt 230 Volt AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete all as specified and/or directed by Engineer-in-Charge. | 22 | Each | 1,160 ₹25,520 | 1,500 ₹33,000 | 1,150 ₹25,300 Lowest | 2,000 ₹44,000 | 1,600 ₹35,200 |
| 3.00 | Supply and fix in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and/or directed by Engineer-in-Charge. | 80 | Each | 2,540 ₹2,03,200 | 2,200 ₹1,76,000 | 1,550 ₹1,24,000 Lowest | 2,800 ₹2,24,000 | 2,000 ₹1,60,000 |
| 4.00 | Supply and fix in replacement LED luminaries point or linear suitable for pendant, batten, angle holder BC/B22 or SBC/B15 or any existing size of power rating 5 watt with luminous efficacies not less than 110 Lumen/watt, complete all as specified and/or directed by Engineer-in-Charrge. | 1,200 | Each | 55 ₹66,000 Lowest | 65 ₹78,000 | 60 ₹72,000 | 90 ₹1,08,000 | 70 ₹84,000 |
| 5.00 | Supply and fix in replacement LED luminaries point or linear suitable for pendant, batten, angle holder BC/B22 or SBC/B15 or any existing size of power rating 7 watt with luminous efficacies not less than 110 Lumen/watt, complete all as specified and/or directed by Engineer-in-Charrge. | 1,200 | Each | 55 ₹66,000 Lowest | 65 ₹78,000 | 80 ₹96,000 | 90 ₹1,08,000 | 90 ₹1,08,000 |
| 6.00 | Supply and fix in replacement LED luminaries point or linear suitable for pendant, batten, angle holder BC/B22 or SBC/B15 or any existing size of power rating 9 watt with luminous efficacies not less than 110 Lumen/watt, complete all as specified and/or directed by Engineer-in-Charrge. | 1,200 | Each | 55 ₹66,000 Lowest | 65 ₹78,000 | 90 ₹1,08,000 | 90 ₹1,08,000 | 100 ₹1,20,000 |
| 7.00 | Supply and fix in replacement LED luminaries point or linear suitable for pendant, batten, angle holder BC/B22 or SBC/B15 or any existing size of power rating 12 watt with luminous efficacies not less than 110 Lumen/watt, complete all as specified and/or directed by Engineer-in-Charrge. | 1,200 | Each | 55 ₹66,000 Lowest | 140 ₹1,68,000 | 110 ₹1,32,000 | 90 ₹1,08,000 | 140 ₹1,68,000 |
| 8.00 | Supply and fix in replacement of LED single tube light fitting surface / pendent mounting complete with batten for LED Tube light 20 W LED cool wihite with PC housing provided for efficient heat dessipation with poly carbonate diffuser & intigrated electroic driver complete all as specified and/or directed by Engineer-in-Charge. | 300 | Each | 430 ₹1,29,000 | 160 ₹48,000 Lowest | 180 ₹54,000 | 200 ₹60,000 | 220 ₹66,000 |
| 9.00 | Supply and fix in replacement of LED single tube light fitting surface / pendent mounting complete with batten for LED Tube light 10 W LED cool wihite with extruded Aluminum housing provided for efficient heat dessipation with poly carbonate diffuser & intigrated electronic driver complete all as specified and/or directed by Engineer-in-Charge. | 40 | Each | 230 ₹9,200 | 220 ₹8,800 | 160 ₹6,400 Lowest | 180 ₹7,200 | 350 ₹14,000 |
| 10.00 | Taking down existing unserviceable/old copper / alluminium point wiring (light, fan, socket, power point ) complete including fitting fixtures such as switches, ceiling roses, pendant/angle holders regulators, sockets etc. complete all as specified and/or directed by Engineer-in-Charge. | 260 | Per point | 10 ₹2,600 | 10 ₹2,600 | 2 ₹520 Lowest | 5 ₹1,300 | 10 ₹2,600 |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
11 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 138 WE
CWE, HQ 138 WE
REPAIR/ MAINTENANCE OF EXHAUST FAN, CIRCULATON FAN, GEYSER, ENERGY SAVING LUMINARIES AND ALLIED WORKS AT SECTOR C UNDER GE 865 EWS
2025_MES_714231_1
138WE/L-74/2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE 865 EWS
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE 865 EWS
₹99,000
Yes
12 Aug 2025
13 Jun 2025
18 Jul 2025
13 Jun 2025
11 Jul 2025
27 Jun 2025
Amount
Supply and fix in replacement LED down light (round, Cool white) of capacity 15 Watt, motion sensing based with 4.5 mtrs radius, 215 Volts complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement LED street light fitting 35 Watt 230 Volt AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement LED luminaries point or linear suitable for pendant, batten, angle holder BC/B22 or SBC/B15 or any existing size of power rating 5 watt with luminous efficacies not less than 110 Lumen/watt, complete all as specified and/or directed by Engineer-in-Charrge.
Supply and fix in replacement LED luminaries point or linear suitable for pendant, batten, angle holder BC/B22 or SBC/B15 or any existing size of power rating 7 watt with luminous efficacies not less than 110 Lumen/watt, complete all as specified and/or directed by Engineer-in-Charrge.
Supply and fix in replacement LED luminaries point or linear suitable for pendant, batten, angle holder BC/B22 or SBC/B15 or any existing size of power rating 9 watt with luminous efficacies not less than 110 Lumen/watt, complete all as specified and/or directed by Engineer-in-Charrge.
Supply and fix in replacement LED luminaries point or linear suitable for pendant, batten, angle holder BC/B22 or SBC/B15 or any existing size of power rating 12 watt with luminous efficacies not less than 110 Lumen/watt, complete all as specified and/or directed by Engineer-in-Charrge.
Supply and fix in replacement of LED single tube light fitting surface / pendent mounting complete with batten for LED Tube light 20 W LED cool wihite with PC housing provided for efficient heat dessipation with poly carbonate diffuser & intigrated electroic driver complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of LED single tube light fitting surface / pendent mounting complete with batten for LED Tube light 10 W LED cool wihite with extruded Aluminum housing provided for efficient heat dessipation with poly carbonate diffuser & intigrated electronic driver complete all as specified and/or directed by Engineer-in-Charge.
Taking down existing unserviceable/old copper / alluminium point wiring (light, fan, socket, power point ) complete including fitting fixtures such as switches, ceiling roses, pendant/angle holders regulators, sockets etc. complete all as specified and/or directed by Engineer-in-Charge.
Material and labour for point wring complete with stranded copper conductor 1100 V grade cable 1.5 sqmm FRLS with colour coding (Nominal area) PVC insulated (unsheathed) in and including PVC casing caping not less than 20 mm width with sunk in pressed steel terminal boxes of required size not less than 1.6 mm thick factory made and factory painted with stove enameled black paint with top cover 3 mm thick bakelight laminated sheet with brass screws and Cup washers with all assessories including 1.5 sqmm stranded copper conductor cable PVC insulated FRLS in green colour as earth wire connected to common earth dolly complete for light fitting / exhaust fan complete all as specified and/or directed by Engineer-in-Charge.
All as per item No 11 here in before but for 5 Amp 3 pin socket on inedependent board complete all as specified and/or directed by Engineer-in-Charge.
All as per item No 11 here-in-before but for point wiring with 4 sqmm PVC insulated, unsheathed single core stranded copper conductor 1100 Volt grade in PVC capping cassing on wall /floor etc. with all accessories of suitable size MS/Pressed steel terminal boxes 1.6 mm thick with bakelite sheet cover (hylum) 3mm thick /PVC Gang box for mounting switch, socket, cup washers complete with all accessories for one 6 pin 15 Amp socket outlet point on independent board including 4 sqmm PVC insulated copper conductor in green colour common earth and connecting to earth dolly complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix of switch piano 5 Amps, flush type, single pole, one way, 230 Volts, AC supply complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix switch piano 16 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and/or directed by Engineer-in-Charge.
Supply and Fix switch socket combination, 2 in 1,3 Pin, 5 Amp 240 volt flush type complete all as specified and/or directed by Engineer-in-Charge.
Suply and fix switch socket combination piano flush button single pole one way 5 in 1, 5/16 Amp, 240 Volts including gang box complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of air circulating fan with Plastic body 300 mm sweep and making necessary arrangements for fixing and connectioning with flexible three core cable from the ceiling rose complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of air circulating fan any type and size with iron body 300 mm sweep including taking down the existing fan and making necessary arrangements for fixing of iron body 300 mm sweep and connectioning with flexible three core cable from the ceiling rose complete all as specified and/or directed by Engineer-in-Charge.
M&L for Replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in groud to a depth not lss than 2.25 mtrs deep below normal ground level with top edge of earth plate not less than 1,5 ntrs below normal ground level connected to galvanised iron strip 32 x 6mm as earthing leads by means of galvanised bolts, nuts, check nuts and washer of galvanised iron or steel complete with 20 mm dia GI Pipe light grade for watering and 40mm dia GI light grade pipe for protection of strip upto test point including test point of strip 50x50x3mm GI, charcoal dust, common salt 15cm all around the earth plate all as shown inelectric plate No.3 of MES SSR Part-I all as specifed or indicated and testing on competion including necessary excavation, earth work PCC pit and with RCC cover of suitable size water funnel with wire mesh complete all as specified and/or directed by Engineer-in-Charge.
All as per item No 20 above, but using GI wire 4.0 mm dia as earthing leads by means of galvanised bolts, nuts, check nuts and washer of galvanised iron or steel complete with 20 mm dia GI Pipe light grade for watering and 40mm dia GI light grade pipe for protection of 4.0mm dia GI wire charcoal dust, common salt 15cm all around the earth plate all as shown in electric plate No.3 of MES SSR Part-I all as specifed or indicated and testing on competion including necessary excavation, earth work PCC pit and with RCC cover of suitable size, water funnel with wire mesh complete all as specified and/or directed by Engineer-in-Charge.
M & L for submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping wire size 2x4.0 sq. mm + 1x4.0 sq. mm earth wire complete all as specified
Dismantling storage type water heater, vertical type, 25 Ltrs capacity taking out all unserviceable/defective parts & supply and fix, inner tank with single weld line design, outer tank, high density PUF insulation, thermostat, assembly, safety valve, NRV, heating element 2.0 Kilowatts operating voltage 220-240 volts, inicating lamp (Red, Green), Plug top, Hot/Cold water pipes including wiring work, all other accessories required, painting and refixing & testing the same complete all as specified and/or directed by Engineer-in-Charge.
Taking down water heater storage type cap 25 Ltr of any make vertical/horizontal type after disconnecting the electric/ water connections and dismantling the heating elements geyser assy and descaling with descaling solutions and replacement of gaskets suitable for resisting 98 degree temp /nut bolts etc. all as directed and testing the safety devices and reinstalling at same location complete all as specified and/or directed by Engineer-in-Charge.
Taking down water heater storage type cap 50 Ltr of any make vertical/horizontal type after disconnecting the electric/ water connections and dismantling the heating elements /geyser assy and descaling complete with de scaling solutions and replacement of gaskets suitable for resisting 98 degree temp /Nut bolts etc. all as directed and testing the safety devices and reinstalling at same location complete all as specified and/or directed by Engineer-in-Charge.
Taking down water heater storage type cap 100 Ltr of any make Vertical/horizontal type after disconnecting the electric/ water connections and dismantling the heating elements /geyser assy and descaling complete with de scaling solutions and replacement of gaskets suitable for resisting 98 degree temp /nut bolts etc. all as directed and testing the safety devices and reinstalling at same location complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of water inlet/outlet assy suitable for storage water heater of 25/50 Ltrs capacity having provn of housing thermostate, heating element including providing rubber gaskets and holding nut bolts etc. complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of water inlet/outlet assy suitable for storage water heater of 100 Ltrs capacity having provn of housing thermostate, heating element including providing rubber gaskets and holding nut bolts etc. complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of thermostate switch for water storage heater suitable for Racold type 220/240V 50Hz AC temperature range 32 - 88 degree centigrade ISI marked complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of thermostate switch for water storage heater suitable for Pearl / orison type 220/240V 50Hz AC temperature range 32 - 88 degree centigrade ISI marked complete all as specified and/or directed by Engineer-in-Charge.
Suply and fix in replacement of heating elements suitable for water storage heater vertical type RACOLD/ORISON/PEARL make 220/240 V AC 1500W and making connections and testing complete all as specified and/or directed by Engineer-in-Charge.
Suply and fix in replacement of heating elements suitable for water storage heater vertical type RACOLD/ ORISON/PEARL make 220/240 V AC 2000W and making connections and testing complete all as specified and/or directed by Engineer-in-Charge.
Suply and fix in replacement of heavy duty PVC connections armoured type with brass union, nut, heat resistance type rubber washer for hot water complete all as specified and/or directed by Engineer-in-Charge.
Suply and fix in replacement of PVC connections with brass union, nut, rubber washer for cold water complete all as specified and/or directed by Engineer-in-Charge.
Suply and fix in replacement of Indicating lamps suitable for storage water heater any type & cap complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement stop valve brass CP of size 15 mm dia heavy duty complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement angle valve brass CP of size 15 mm dia heavy duty complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement plug top 15 Amps suitable for working on 230 volts 50 Hz AC supply complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement gang box 2 in 1, 3 pin 5Amp flush type universal complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement stainless steel tank of capacity 25 ltr as per sample complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix stainless steel tank of capacity 50 ltr as per sample complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement stainless steel tank of capacity 100 ltr as per sample complete all as specified and/or directed by Engineer-in-Charge.
Supply & fix in replacement new compressor of 1/8 HP suitable for refrigerator of 165 to 200 Ltr and testing on completion complete all as specified and/or directed by Engineer-in-Charge. Note - Charging of gas R134a shall be paid seperately under respective item.
All as per item No- 43 above but 1/6 HP for refrigerator capacity 220 to 320 Ltrs complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of evaporator cooling coil of refrigerant 165 to 200 ltrs capacity complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of evaporator cooling coil of refrigerant 220 to 320 ltrs capacity complete all as specified and/or directed by Engineer-in-Charge.
Suply and fix in replacement of relay box type/open type suitable for 1/6 to 1/8 HP refrigerator of any make & size complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of overload protector suitable for refrigerator of any make & size complete all as specified and as directed
Supply and fix in replacement compressor of 1/3 HP suitable for deep freezer of capacity 420/425 ltr including dehydrating of system and testing on completion complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of thermostatic switch for refrigerator of any make 165 to 320 Ltrs capacity complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement door gasket suitable for refrigerator of capacity 165/200 ltrs single door complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement door gasket suitable for refrigerator of capacity 286/300 ltrs single door complete all as specified and/or directed by Engineer-in-Charge.
Supply and charging the refrigerent gas R134a in refrigerators of capacity 165 to 420 ltrs including testing complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of metal clad socket 20 Amp complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of Metal clad plug of 20 Amp, complete all as specified and/or directed by Engineer-in-Charge.
Suply and fix in replacement of MCB SP 20 to 32 Amps capacity 230 volt AC supply complete all as specified and/or directed by Engineer-in-Charge.
Suply and fix in replacement of MCB SPN 32 Amps capacity 230 volt AC supply complete all as specified and/or directed by Engineer-in-Charge.
Suply and fix in replacement of MCB SPN 40 - 63 Amps capacity 230 volt AC supply complete all as specified and/or directed by Engr in Charge.
Supply and fix sheet metal single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement electric cable PVC insulated rubber sheathed circular multistranded copper conductor of size 2.5 Sqmm 3 Core complete all as specified and/or directed by Engineer-in-Charge.
Rewinding of burnt windings of Exhaust fans of size 400-450 mm size including dismantling from loc and removing the burnt out winding, cleaning the stator with CTC solution to remove the burnt slots, rewinding the same with new super enamelled copper wire same gauge and size /number of turns, varnishing the winding completely and reassembling, fixing in its original position, testing complete all as specified and/or directed by Engineer-in-Charge. (Spare parts such as gun metal bushing, condensor, ball beaing etc. replaced will be measured & paid seperately)
Al as per above item No 61 above, but exhaust fan of size up to 300 mm sweep complete all as specified and/or directed by Engineer-in-Charge.
Material and labour for replacement of louvers made out of metal sheets suitable for exhaust fan opening up to 450 mm sweep including cement work required at site complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix flexible twin twisted copper wire two core of size 23/0.0076mm complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix ball bearing suitable for Exhaust fan 400mm - 450mm sweep any make complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix ball bearing suitable for Exhaust fan up to 300 mm sweep any make complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix condensor 2.5 MFD 230 V suitable for Exhaust fan of any sweep/size complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix condensor 4 MFD 230 V suitable for Exhaust fan of any sweep/size complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix Gun metal Bushings suitable for Exhaust fan fan up to 300 mm sweep any make complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix Gun metal Bushings suitable for Exhaust fan of 450 mm mm sweep any make complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of heat pillar rod of capacity 1.0 to 1.5 KW including taking out burn cable etc. from any type of heating device and make it serviceable by replacing cables and testing on completion complete all as specified and/or directed by Engineer-in-Charge.
Supply and fix in replacement of switch combination ( set of three ) combine switches for heating device of any make and making serviceable complete all as specified and/or directed by Engineer-in-Charge.
Taking down old unserviceable bollard light and supply and fix LED square bollard aluminium housing with milky diffuser ( Bulb 100Lm/W) with IP 65 230 Volts complete all as specified and/or directed by Engineer-in-Charge. Make HPL cat part No HPLLEDB7W or equivalent in Havells & Phillips.
Taking down old unserviceable bollard light and supply and fix LED Pyramid round bollard aluminium housing with glare free mushroom shaped milky diffuser ( Bulb 100Lm/W) with IP 65 230 Volts complete all as specified and/or directed by Engineer-in-Charge. Make HPL cat part No HPLLEDBPR9W or equivalent in Havells & Phillips.
R B TRADERS (BID ID -3355331)
Charan sales and Service (BID ID -3347142)
Top Mind Industries Pvt Limited (BID ID -3347167)
M/S Chib Engineers (BID ID -3351366)
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .