Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.5 CrAccepted-AOC HSVP PANCHKULA | PANCHKULA | HARYANA | 133301 | ₹4.5 Cr Quoted ₹5.1 Cr | 1 | Accepted-AOC Work allotted |
| 2 | 2₹5.7 Cr+₹60.9 L (11.9%)Rejected-AOC H NO 1100 SECTOR 3 124001 | ROHTAK | HARYANA | 124001 | ₹5.7 Cr+₹60.9 L (11.9%) | 2 | Rejected-AOC Unallotted |
| 3 | 3₹5.8 Cr+₹65.3 L (12.7%)Rejected-AOC HSVP PANCHKULA | PANCHKULA | HARYANA | 133301 | ₹5.8 Cr+₹65.3 L (12.7%) | 3 | Rejected-AOC Unallotted |
Tender Value
₹4.0 Cr
EMD Value
₹8.0 L
Closing Date
24 Jan 2022, 10:00 amClosed
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER, PHED NO. 2 JIND
BRAH KHURD Const of CB WW Brah Khurd and Brah Kalan with Raw water arrangement by pumping for WW and Distribution system with FHTC
2022_HRY_204534_1
HO3714DATED14012022
Open Tender
Civil Works
Works
365 days
JIND
Please refer Tender documents.
4 documents required · 4 mandatory
₹15,000
₹8.0 L
Yes
9 Feb 2022
18 Jan 2022
24 Jan 2022
18 Jan 2022
24 Jan 2022
18 Jan 2022
Amount
Construction of 1.00 MLD Rapid sand filtration plant comprising of labor for DI Pipe from existing raw aer main/pump, inlet box, inlet channel , Alum dozing, Flash mixing, Tapeard flocculator, Rectangular setting tank, filter box, over head reservior for back wash including pump sets and and electric control panel, sluice valves, DI PIpes, Di specials , manhole covers, air scour equipment, Chemical house including chlorination equipment and arrangeent of flow measurement and sand bed complete in all respect as per DNIT. Labour rate for fixing Di, S/S class K9 ISI marked pipes including cost of DI Specials/fitting, ISI marked PN 1.6 sluice valves including cost of exacavation, laying, cutting , jointing , threading and jointing maerial in horizontal length including connections complete in all respects. From existing raw water main pump to inlet box of filter unit to clear water tank. Note - DI pipe will be supplied by the department free of cost sluice valve ISI Marked. (BASED ON SCADA SYSTEM-1.00 MLD WTP)
Supply and erection of Horizontal spindle split casing type pumping sets of minimum Four (4) star rating duties directly coupled to Ac sqarrel cage induction type motor with 1440 RPM, 3 phase, 50 HZ and accessories as described in Schedule No. II with priming arrangement and complete base frame as per IS marked compete in all respect. A) Raw Water Pump Set. 2400 LPM with 12 Mtrs. Head at Water Works
Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500X1200mm and 400mm deep having following accessories complete in all respect as per approved NIT. a. Incomer switch 200 Amp. b. Aluminum bus bar chamber of 300 Amp. Capacity. c. Volt meter 100X100mm range 0 to 500 V (AE/KAPPA/L & T ) d. Indicating lamp-one set.
Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powered coated of approximate size 1200/900mm and 400mm deep having following items:- A) For Raw water pump sets for 2400 LPM x 12 Mtrs. head = 2 Nos. (a) Main switch 63 Amp. 2 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 1 No. (AE/KAPPA/L&T) (c) Amp. meter 100X100 mm range 0 to100 Amp. 2 Nos. (AE/KAPPA/ L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS 1 No. & ASS 2 No. each of approved make (f) SPP 1 No. of approved make (g) Motor starter, star delta 2 No. for 2400 LPM x 12 Mtrs. Head Motor (L&T Simens, AAB) (h) Capcitor of suitable capacity -2 Nos. (i) Indicating Lamp-One Set ( j) Change over switch 63 Amp. = 1 No.
For Clear water pump sets for 2400 LPM x 40 Mtrs. head = 2 Nos. (a) Main switch 63 Amp. 2 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 1 No. (AE/KAPPA/L&T) (c) Amp. meter 100X100 mm range 0 to100 Amp. 2 Nos. (AE/KAPPA/ L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS 1 No. & ASS 2 No. each of approved make (f) SPP 1 No. of approved make (g) Motor starter, star delta 2 No. for 2400 LPM x 40 Mtrs. Head Motor (L&T Simens, AAB) (h) Capcitor of suitable capacity -2 Nos. (i) Indicating Lamp-One Set ( j) Change over switch 63 Amp. = 1 No.
For Clear water pump sets for 1400 LPM x 30 Mtrs. head = 2 Nos. (a) Main switch 63 Amp. 2 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 1 No. (AE/KAPPA/L&T) (c) Amp. meter 100X100 mm range 0 to100 Amp. 2 Nos. (AE/KAPPA/ L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS 1 No. & ASS 2 No. each of approved make (f) SPP 1 No. of approved make (g) Motor starter, star delta 2 No. for 1400 LPM x 30 Mtrs. Head Motor (L&T Simens, AAB) (h) Capcitor of suitable capacity -2 Nos. (i) Indicating Lamp-One Set ( j) Change over switch 63 Amp. = 1 No.
For Clear water pump sets for 500 LPM x 35 Mtrs. head = 2 Nos. (a) Main switch 63 Amp. 2 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 1 No. (AE/KAPPA/L&T) (c) Amp. meter 100X100 mm range 0 to100 Amp. 2 Nos. (AE/KAPPA/ L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS 1 No. & ASS 2 No. each of approved make (f) SPP 1 No. of approved make (g) Motor starter, star delta 2 No. for 500 LPM x 35 Mtrs. Head Motor (L&T Simens, AAB) (h) Capcitor of suitable capacity -2 Nos. (i) Indicating Lamp-One Set ( j) Change over switch 63 Amp. = 1 No.
For Clear water pump sets for 1000 LPM x 35 Mtrs. head = 2 Nos. (a) Main switch 63 Amp. 2 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 1 No. (AE/KAPPA/L&T) (c) Amp. meter 100X100 mm range 0 to100 Amp. 2 Nos. (AE/KAPPA/ L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS 1 No. & ASS 2 No. each of approved make (f) SPP 1 No. of approved make (g) Motor starter, star delta 2 No. for 1000 LPM x 35 Mtrs. Head Motor (L&T Simens, AAB) (h) Capcitor of suitable capacity -2 Nos. (i) Indicating Lamp-One Set ( j) Change over switch 63 Amp. = 1 No.
Supply, erection, testing of ISI makred copper wire for 4 nos. motors with underground system in PVC and flexible pipes copper wire size 6 Sq mm complete in all respects with accessories like thimble etc. complete in all respects. 6 Sq mm 3 core
10 Sq mm 3 core
25 Sq mm 3 core
Supply, erection, testing of reputed make LED light 100 watts with fitting and accessories complete in all respects.
Operation and maintenance for raw water pumping station complete scope of work mentioned in the DNIT (Disinfection material supplied by the PHED) as per schedule -IV for a period of 5 years after 12 months during defect liability period and 3 months trial run period. (will be charged to the A/Mtc. estimate). complete in all respects. Operation and maintenance during defect liability period (operation only) after 3 month trial run period.
For 1st year Operation and maintenance after defect liability period
For 2nd year Operation and maintenance
For 3rd year Operation and maintenance
For 4th year Operation and maintenance
For 5th year Operation and maintenance
Bidder Name
Amount
Kulbir Singh Contractor(GSTN-06ATZPS6352H1ZW)
ROHTASH KUMAR CONTRACTOR(GSTN-NA)
Himmat Singh Contractor(GSTN-NA)
Himmat Singh Contractor
Kulbir Singh Contractor
Kulbir Singh Contractor
Himmat Singh Contractor
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .