REPAIRS REPLACEMENT TO JOINERY, SANITARY FITTINGS AND FIXTURES, PLUMBING FITTINGS, PLINTH PROTECTION, WPT, PLASTERING, ROLLING SHUTTERS, OH TANKS ETC AT ZONE E AREA UNDER GE CHENNAI

Amount

Supply only liquid water proofing compound conforming to IS: 2645-2003 all as specified and directed.

M&L for plain cement concrete (1:7:12) type F-2 using 40mm thick graded brick aggregate as in sunken floor filling mass concrete complete all as specified and directed.

M&L reinforced cement concrete (1:1½:3) type A-1 using 20mm graded stone aggregate as in chajjas complete all as specified and directed.

M&L for precast RCC (1:1½:3) type A-1 using 20mm graded aggregate as in manhole covers, landings etc. with plain faces set in cement mortar (1:4) complete including necessary formwork all as specified and directed.

M&L for brick work straight or curved on plan exceeding 6 metre mean radius using old size fly ash bricks built in cement mortar (1:6) all as specified and directed.

Cutting holes in brick/ stone walls built in cement mortar or cement lime mortar for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate for the required depth of embedded portion of holdfasts or lugs measured from the face of jamb into the wall exc. half brick but n. exc. one brick complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including cutting & polishing laid over and including 15mm thick screed in cement mortar (1:6) including dismantling the old stone complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings n. exc. 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings exc. 1.5 Sqm n. exc. 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each including all fittings complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each and resecuring in the same opening after cutting, easening etc with new iron mongry complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought, framed, rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred cut at two corners and joined by inserting two No. 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall by drilling and providing 100mm long MS screws with PVC fasteners complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on back face, supplying and fixing in frame at site complete all as specified and directed.

M&L 35mm thick flush door shutter, solid core construction, with block board core and plywood face panels, commercial type on both side etc. complete all as specified and directed.

S&F 2nd class hardwood plain framed panelled shutters 35mm thick, (any No of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned & chemically treated and fitted to chowkats complete all as specified and directed.

S&F 2nd class hardwood glazed and skeleton shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (a) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 100mm long all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as specified and directed.

S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F mild steel butt hinge, medium weight cold rolled 100mm size all as specified and directed.

S&F continuous piano hinge mild steel bright finish or elactro-galvanized width of flap (when open) 30mm complete all as specified and directed.

S&F in extruded aluminium alloy handle cast type anodised 100mm size all as specified and directed.

S&F extruded aluminium alloy handle cast type anodised 200mm size all as specified and directed.

S&F floor door stopper, 140mm overall length of cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

All as per item No. 26.00 above but fixed in repairs.

S&F aluminium (Die cast) body door closer hydraulically regulated, designate No. 2, universal type, suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 kg all as specified and directed.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples complete all as specified and directed.

All as per item No. 29.00 above but fixed in repairs.

S&F 75mm size, 4 lever grade 1 brass lock for drawer, cupboard shutter etc. all as specified and directed.

S&F mild steel mortice lock vertical type 4 levers of size 100mm with stainless steel handle set suitable for right or left, inside or outside for opening doors fixed with brass screws complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F aluminium powder coated designer curtain rods (draw berms rods) 19mm dia exterior grade, 3mm thick with holding clamps and fixed to wall with PVC rawl plug and brass screws including taking down the existing curtain rod of any description complete all as specified and directed.

S&F aluminium powder coated designer brackets for curtain rod suitable for aluminium powder coated designer curtain rod all as specified and directed.

S&F rolled mild steel roof trusses (framed), trussed purlins, crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering fixed with self tapping screws as per manufacturer’s instruction complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering/ cladding to wall fixed with self tapping screws as per manufacturer’s instruction complete all as specified and directed.

S&F rolling shutter of lath thickness 1.25mm including top cover, anchoring rod, hasp & staple etc. gear operated type with bevel gear box and crank handle without ball bearing erected in position complete all as specified and directed.

S&F anodised aluminium snap grid size of grid 605mm X 605mm framework for false ceiling including GI suspenders/ hangers fixed to roof slabs by means of ceiling cleats etc. complete all as specified and directed.

M&L providing 12mm thick gypsum board as in false ceiling fixed with screws as per manufacturer's instruction complete all as specified and directed.

S&F in repairs aluminium powder coated sliding window (for width 1.00 above and openable for below 1.50 M width) using aluminium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including fixed with sash bars aluminium anodised snap beads, screws and fixed alongwith same section in three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for wire mesh shutters) etc (The rate is inclusive of all fixings of builders hard ware such as wire mesh hinges, bow handles, locking arrangements etc complete all as specified and directed.

S&F in repairs powder coated aluminium ventilators using aluminium section weighing not less than 0.48 Kg per RM for frame louvers aluminium anodized snap beads, screws and fixed alongwith with 5mm thick frosted/ pin headed glass fixed with glazing clips and one for wire mesh shutter fixed on frame etc. including provision of builders hard ware such as wire mesh, stainless steel hinges, aluminium handles, locking arrangements etc. complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

M&L for cleaning the surface of sunken floor with wire brush and washing with hydrochloric acid to remove dust, dirt, oil, grease, loose particles etc., and applying a coat of water based acrylic polymer modified MIXGUARD AC @ 1 Kg per sqm as in Part A (Powder) and Part B (Liquid) in ratio (3:1) and rendering 20mm thick in cement mortar (1:4) as in sunken floor slab, sunken portion of walls mixed with water proofing compound as per manufacturer's instructions and finished even and smooth complete all as specified and directed.

M&L APP modified prefabricated five layer water proofing membrane matt finish, 3mm thick and weighing not less than 3.6 kg/ sqm reinforced with non woven polyester matt black finished over one coat of bitumen primer @ 0.40 Litre/ Sqm and torch application of membrane using gas burner with 100mm overlap as per manufacturer's instructions with top most layer of surface finished with one coat of solar reflective aluminium paint @ 0.10 Litre/ Sqm complete all as specified and directed. Note: (i) The work shall be executed through Manufacturer's applicator approved by GE. (ii) The quoted rate is deemed to include the cost of digital photograph and plaster plate as per Particular Specifications.

M&L for 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one both faces including 1.5mm thick decorative laminate type 1 of surface finish, colour and pattern as approved fixed with apporoved adhesive to timber frame work as per manufacturer's instructions complete all as specified and directed.

M&L for 18/ 19mm thick pre-laminated particle board, medium density, flat pressed, single or three layer type with BWR type adhesive fixed to timber frame work with screws fixed in repairs complete all as specified and directed.

M&L for 6mm thick teak wood lipping fixed to 12mm thick plywood with nails complete all as specified and directed.

M&L for 6mm thick teak wood lipping fixed to 18/ 19mm thick particle board with nails complete all as specified and directed.

M&L 25mm thick cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub floor/ padding on terrace finished fair and even complete all as specified and directed.

M&L 50mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring, finished even and smooth using extra cement complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n. exc. 63mm, deposited, spread and leveled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection/ foot path etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sub floor, finished fair and even and prepared to receive topping layer complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigment laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L sand filling under floors or in foundation including watering, well ramming & consolidating in layers not exceeding 25cm thick complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigments laid as per manufacturer's instructions complete all as specified and directed.

Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing the debris outside MD land and rubbish of the premises complete all as specified and directed.

M&L for vitrified light shade coloured ceramic tiles 8 to 10mm thick (Square/ Rectangle) area of each tiles n. exc. 0.36 sqm in floors etc.; set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

All as per item No. 62.00 above but on vertical surfaces such as skirting, dados and risers as in steps etc., laid over and including 10mm thick rendering in cement mortar (1:3) complete.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc. 0.06 Sqm but n. exc. 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for joint free non skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

All as per item 65.00 above for work on vertical surfaces such as skirting, dados and risers as in steps etc., laid over and including 10mm thick rendering in cement mortar (1:3).

M&L for rounding to edges of stone slabs, such as in steps, cooking platform and other similar situations all a specified and directed.

M&L glazed coloured ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 300mm x 7mm thick laid on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match the tile laid over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M&L machine cut Kota stone slab 20-25mm thick as in flooring laid over and including 15mm thick screed bed in cement mortar (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L machine cut Kota stone slab 20-25mm thick as in riser of steps, skirting, dado & pillars etc. laid over and including 15mm thick backing coat in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

Taking down cement plaster on brick work or stone walls etc including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick/ concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in cement mortar (1:3) as on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick in cement mortar (1:3) mixed with and PIDI PROOF LW compound @ 200ml per bag and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note: PIDI PROOF LW shall be measured and paid for separately.

M&L preparation of newly plastered or previously untreated surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior acrylic emulsion paint (Apex of Asian or Weather coat of Berger or equivalent of other specified makes) over a coat of exterior sealant complete all as specified and directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F figured glass 4.0mm thick, pinhead type and glazing with oil putty in square n. exc. 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds complete all as specified and directed.

M&L preparation of new wooden or wood based surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc, including taking up or down the existing GI tubing complete all as specified and directed.

All as per item No. 82.00 above but 20mm bore.

All as per item No. 82.00 above but 25mm bore.

Supply and laying 16mm bore CPVC pipes SDR 11 and plain SDR 11 fittings on wall/ ceiling or laying in floor including taking down existing pipe complete all as specified and directed.

Supply and laying 20mm bore CPVC pipes SDR 11 and plain SDR 11 fittings on wall/ ceiling or laying in floor including taking down existing pipe complete all as specified and directed.

S&F 500 ltr capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F 1000 ltr capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed in repairs complete all as specified and directed.

S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 25mm bore iron pipe and fixed in repairs complete all as specified and directed.

S&F ball valve PTMT with epoxy coated aluminium rod for 20mm bore pipe, weight not less than 210gms, high pressure with polyethylene high density float and complete screwed for iron pipe including taking down old one complete all as specified and directed.

S&F ball valve PTMT with epoxy coated aluminium rod for 25mm bore pipe, weight not less than 455gms, high pressure with polyethylene high density float and complete screwed for iron pipe including taking down old one complete all as specified and directed.

S&F 15mm dia bib taps brass chromium plated, fancy type, long body with flange with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes fixed in repairs complete all as specified and directed.

S&F in repair PTMT bib tap standard any colour suitable for 15mm bore pipe high pressure screwed for iron pipe and fixed (minimum weight 90gms) complete all as specified and directed.

S&F in repair PTMT bib tap long body standard any colour suitable for 15mm bore pipe high pressure screwed for iron pipe and fixed (minimum weight 120gms) complete all as specified and directed.

S&F in repair PTMT pillar tap fancy type standard any colour suitable for 15mm bore pipe high pressure screwed for iron pipe and fixed (minimum weight 120gms) complete all as specified and directed.

S&F in repair PVC sink cock with flange as per cat No. 132H of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs 15mm dia PTMT stop valves any colour high pressure screwed for iron pipe or for union (Minimum weight 90g) complete all as specified and directed.

S&F in repairs PVC wall mixer with 'L' bend as per Cat No. 1375H of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs PVC washing machine tap as per Cat No. 1491H of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs PVC 2 way angle cock with flange as per Cat No. 145H of Prayag or or equivalent from other makes specified in particular specifications all as specified and directed.

S&F in repairs PVC soap dish as per Cat No. 195 of Prayag or equivalent from other makes specified in particular specifications all as specified and directed.

S&F in repairs PTMT shelf fixed with and including chromium plated brass screws and plastic cleats (minimum weight 300g) complete all as specified and directed.

S&F 15mm dia hot and cold mixer type pillar tap, fancy type of cast copper alloy with capstan head, chromium plated, screwed down, high pressure with screwed long shank and fly nut for iron pipes fixed in repairs complete all as specified and directed. Make: JAQUAR/ PRAYAG/ PARRYWARE/ H&R JOHNSON

S&F in repairs cover for rotational moulded polythelene water storage tank of capacity 250 litre to 2000 litre provided with hinge device and locking arrangement and fixed in position complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. including demolition and breaking up existing pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including demolition and breaking up existing pipe complete all as specified and directed.

S&F PVC (SWR) bend any radius with access door suitable for 110mm dia pipes complete all as specified and directed.

S&F PVC (SWR) bend any radius with access door suitable for 75mm dia pipes complete all as specified and directed.

S&F PVC (SWR) branch piece single (single 'Y') equal or unequal 110mm bore with access door complete all as specified and directed.

S&F PVC (SWR) branch piece single (single 'Y') equal or unequal 75mm bore with access door complete all as specified and directed.

Supply and fix in repairs PVC (SWR) vent cowl suitable for 110mm bore vent pipe complete all as specified and directed.

Supply and fix in repairs PVC (SWR) vent cowl suitable for 75mm bore vent pipe complete all as specified and directed.

M&L in repairs for PVC (SWR) multi floor trap 110mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs CP waste coupling heavy (full thread) of size 32mm as per Cat No. BEA-11 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs CP towel rack as per Cat No. BA-42 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs CP towel rail as per Cat No. BA-10S of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs concealed stop cock regular body 15mm size with flange plate as per Cat No. PIS-18H of Prayag or equivalent from other makes specified in particular specifications all as specified and directed.

S&F in repairs 8" CP overhead shower with arm and flange as per Cat No. BOS-80 of Prayag or equivalent from other makes specified in particular specifications all as specified and directed.

S&F in repairs 4" CP multiflow overhead shower with 225mm arm and flange as per Cat No. BOS-86 of Prayag or equivalent from other makes specified in particular specifications all as specified and directed.

Supply and fix in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm including CI brackets and 32mm waste coupling and waste pipe etc. complete all as specified and directed.

S&F in reapirs PTMT bottle trap having minimum water seal of 25mm for 40mm bore dia of discharge pipe (Minimum weight- 270gms) complete all as specified and directed.

M&L vitreous china wash down water closet pedestal pattern white with including white coloured PVC seat cover including connections to drain (or outgoing pipe) and flush pipe etc. fixed in repairs complete all as specified and directed.

Supply and fix plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device fixed in repairs complete all as specified and directed.

S&F vitreous china wash down water closet squatting pan Orissa pattern of size 580 x 440mm with integral foot rest (white or light coloured) including making necessary connection to soil pipes and flushing cistern fixed in repairs complete all as specified and directed.

S&F in repairs health faucet (hand shower) with 1.0metre long PVC tube with wall hook, chromium plated as per Cat No. BEA-40 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs 15mm dia chromium plated angle cock with as per Cat No. PIS-10 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs 15mm dia chromium plated 2 way angle cock with as per Cat No. PIS-11H of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs 15mm dia chromium plated sink cock regular spout (W/M) with flange plate as per Cat No. PIS-16 of Prayag or or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs 15mm dia chromium plated bib cock long body with flange plate as per Cat No. PIS-08 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs tumbler holder with glass as per Cat No. BA-16G of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality all as specified and directed.

S&F PVC low level flushing cistern 10 ltr with complete accessories such as PVC flush pipe, over flow pipe etc. fixed in repairs complete all as specified and directed.

S&F in repairs toilet paper holder with flap recessed type matt chromium plated as per cat No. BA-08 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs soap dish, matt finished chromium plated (MCH/ Colour CP) as per cat no BA-25G or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs corner glass shelf superior quality, matt finished, chromium plated (MCH/ Colour CP) with bracket as per Cat No. BEA-46 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs glass shelf matt finished, chromium plated (MCH/ Colour CP) of size 500mm x 60mm with ABS bracket 450mm x 125mm x 6mm and fittings as per Cat No. BEA-47 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs chromium plated robe hook as per Cat No. BA-87 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs stainless steel sink of overall size 915mm x 460mm with draining board and bowl size 410mm x 355mm x 175mm made out of 1mm thick stainless steel sheet of grade AI SI-304 with plugs, washers, waste coupling and 40mm dia waste pipe, fixed over CI brackets and connecting union to pipe etc., compete all as specified and directed.

S&F in repairs 1mm thick stainless steel sink kitchen or laboratory overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm with plugs, washers, wastes including bedding in cement mortar on to dwarf wall or on cantilever brackets and connecting union to pipe complete all as specified and directed.

S&F in repairs brass chromium plated wall mixer valve 2-in-1, fancy type with provision of overhead as per cat No. PIS-75 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repair stainless steel plate rack of size 31" x 36" x 10" with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of good quality all as specified and directed. Make: Prayag Cat No. P-348 or equivalent from other makes specified in Particular Specifications.

S&F in repair 600mm x 450mm bevelled edged looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.

S&F in repairs brass chromium plated towel ring all as specified and directed. Make: Prayag Cat No. BA-02 or equivalent from other makes specified in particular specifications.

S&F in repairs 8" PVC corner glass shelf all as specified and directed. Make: Prayag Cat No. 192 or equivalent from other makes specified in particular specifications.

S&F in repairs PVC health faucet with 1.5m long tube and hook (Ivory) complete all as specified and directed. Make: Prayag Cat No. 188 or equivalent from other makes specified in particular specifications.

S&F in repairs PTMT towel ring fixed with and including chromium plated brass screws and plastic cleats (minimum weight 90g) complete all as specified and directed.

S&F in repairs 60cm long PTMT towel rail fixed with and including chromium plated brass screws and plastic cleats (minimum weight 190g) complete all as specified and directed.

S&F in repairs PTMT shower of size 100mm with swivel joints including shower arm 195mm long with bend of 45° with flange fixing with 15mm dia pipe complete all as specified and directed.

Cleaning of service UPVC service/ over head tank exc. 250 ltr but n. exc. 500 ltr capacity and cleaning as under:- (a) Emptying the tank, cleaning the internal surface of tank with wire brushes to remove all type of depositions and then thoroughly washing it. (b) Total disinfection and sterlisation of tank hygienically cleaned and bacteria free and safe by Eco-Friendly for storage of water. Note: (i) Qty of tanks is considered for cleaning twice in a year. (ii) Date of cleaning to be written over each tank after cleaning.

All as per item No. 152.00 above but capacity of tank exc. 500 litres but n. exc. 1000 litres.

Demolition of brick masonry built in cement mortar including all quoins/ arches/ pillars etc. but excluding ashlars facings, dressed stone work, precast concrete articles and disposing off the rubbish debris to distance exc. 1.50 KM and n. exc. 3.00 KM complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise described for and removal of debris outside the MD land complete all as specified and directed.

Demolition of PCC in any situation n. exc. 15cm thick including removal of debries outside MD land complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level including removal of debris to outside MD land complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets; any thickness, including cover fillets/ snap grid etc. complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge and thickness including Nainital or similar pattern roof covering all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise specified.

M&L for attending minor complaints of joinery such as wooden/ steel/ aluminium of any description including pelmet box, cupboards, door springs, rolling shutters etc. requiring carpentry work like adjusting and easing, cutting, pinning, welding and finally good etc. and functioning to seating over with each other with tightening of screws/ nails, doors, helical springs, door closers etc. including supply of screws, nails, plugs, grease etc. to make it functional as in day to day maintenance work complete all as specified and directed.

M&L for attending minor complaints of plumbing & sanitary fittings including water leakage from taps, WC's, flushing systems, urinals, wash basins, flushing pipe, bottle traps, tank delivery pipe lines etc. and any obstruction in water supply in rooms/ quarters involving plumbing work including supply and replacement of screws, nails, washers, check nuts, short pieces, unions, elbows, couplings, tees, tightening fittings of flushing cisterns, M-seal etc. complete all as specified and directed.

NVRAGAVANANDSONS

Anand Constructions