REPAIRS/MAINT OF SANITARY FITTINGS, PLUMBING AND FLOORS OF TOILETS AND ALLIED WORK, REPAIRS/MAINT OF JOINERY AND CONNECTED WORKS FOR 10 AFH, PERIODICAL SERVICES IN VARIOUS BUILDINGS, PERIODICAL SERVICES TO BOUNDARY WALLS OF OMQ AREA, REPAIR/MAINT INC

Amount

Taking down eaves gutters and PVC rain water pipes (of any or pattern) including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed.

S & F 110mm bore PVC (SWR) rain water pipes, single sockets, in any length with sealant rubber ring joints fixed to wall , complete all as specified and directed.

S&F 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction, single, (single T) equal or unequal, complete all as specified and directed.

S & F 75mm bore PVC (SWR) rain water pipes, single sockets, in any length with sealant rubber ring joints fixed to wall , complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction, single, (single T) equal or unequal, complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction, single, (single Y) equal or unequal, complete all as specified and directed.

S&F in repairs for Stop valves, cast copper alloy, chromium plated ,with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for 15 mm dia bore iron pipe or for unions complete all as directed

S&F in repairs 15 mm bore for stops valves, cast copper alloy, chromium plated fancy type with capstan head screwed down, high pressure, screwed both ends iron pipe or for unions, complete all as specified and directed

S&F in repair 15mm bore bib taps, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down, screwed for iron pipe, compelete all as specified and directed.

S&F in repairs 15mm dia bore for pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed on iron pipe, complete all as specified and directed.

S&F in repairs chromium plated shower roses with or without swivel joints, any size, including fixing to any type of pipe or union, complete all as specified and directed.

S&F in repairs plastic water closet seat and cover, white, closed pattern with flat bottom, mild steel chromium plated or aluminized hinge device, complete all as specified.

S&F vitreous china ware wash hand basin white, flat back, size 630 x 450mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand including pedestal, complete all as specified.

S & F in repairs for 32mm waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed.

S&F in repairs 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight -45 gms), complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern), white (excludingfixing bolts, flushing cistern and flush pipe), complete all as specified and directed

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) incl P or S trap, complete all as specified and directed.

S & F in repair Vitreous china urinal, bowl type flat back of size 465 x 355 x 265mm white (minimum), with grating and union for discharge pipe, complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S&F in repair 75mm steel grating, fixed with white cement, complete all as specified and directed.

S&F in repair 110mm dia gratings of PTMT (Minimum weight 25gms), complete all as specified and directed.

S&F in repair 15mm bore, 45cm long PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends and fixed, complete all as specified and directed.

S&F in repair 32mm dia low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm for urinal bowl, complete all as specifed and directed.

S&F in repair 32mm dia PVC waste pipes 900mm long, complete all as specifed and directed.

S&F in repair 15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms), complete all as specifed and directed.

S&F in repair 10 Liters capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe, complete all as specified and directed.

S&F in repair flushing cistern and flushing pipe (exclusive of brackets), complete all as specified and directed.

S&F in repair PVC flusing cistern handles including necessary fixing arrangement, complete all as specified and directed.

S & F in repair, 20mm bore, ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms), complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old water tank, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old water tank, complete all as specified and directed.

S&F in repair of PVC/plastic lid/cover for 500/1000/2000 Ltrs capacity rotational moulded polyethylene water storage tanks, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for Refixing or removal to store, complete all as specified and directed.

Refixing old steel water tubing of 15mm bore and connections in new or old position (walls, ceilings, floors etc.), complete all as specified and directed. (Note : Serviceable GI tube obtained from taking down shall be re-used)

S & F 15mm bore galvanized steel water tubing and connection, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

M&L for cutting chases, pinning in making good to facing where required and pointing in CM (1:3) to ends to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills , sunshades,shelves, lintesl etc and cutting chases for cncealed water tubing or conceales conduit wiring etc and making goor cutting not exc 10cm girth in brick walls, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for Refixing or removal to store, complete all as specified and directed.

Refixing old serviceable steel water tubing of 20mm bore and connections in new or old position (walls, ceilings, floors etc.), complete all as specified and directed. (Note : Serviceable GI tube obtained from taking down shall be re-used)

S & F 20mm bore galvanized steel water tubing and connection, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

S&F in repairs 20mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repair brass CP tubular towel rail, 20mm dia, D type, 60cm long between flanges, compelete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks of 500 ltr capacity and from mouths of circulating pipes, etc., compelete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks of 1000 ltr capacity and from mouths of circulating pipes, etc., compelete all as specified and directed.

M&L 100mm dia cast iron floor trap / Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4), compelete all as specified and directed.

Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) including demolition of brick work, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., compelete all as specified and directed. (Note: plastering work at any height, necessary scfolding, safety belts required to be provided by the contractor without any extra cost to the Govt.)

M & L for rendering 15mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with integral water proofing compound top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as supply only.)

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:3) on fair faces of brick work or concrete surfaces, rendering finished even and smooth (without using extra cement) as in ceiling, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350x250x7mm/450x350 x7mm thick each as in skirting or dado on vertical surfaces of wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

Taking down aluminium shutter and frame exc 1.5 but n exc 4 sqm in each, complete all as specified and directed

Taking down chowkhats with shutters (without taking off shutters from the frames) area exc 1.5 sq. m but n exc 4 sq. m each and removing from site, complete all as specified and directed

Taking down chowkhats with shutters (without taking off shutters from the frames) area n.exc 1.5 sqm and removing from site, complete all as specified and directed

Taking down shutters only of any description area exc 1.00 sqm but not exc 2.00 sqm, complete all as specified and directed.

S&F 2nd class hardwood plain,solid,straight chowkats and frames, wrought, framed rebated on the solid, rounded or cahmfered put together with glue pinned at joint, complete all as specified and directed

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing, complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

M&L for preparing new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. including powder coating (minimum thickness of powder coating 50 micron), complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. powder coating of any colour (thickness or powder coating not less than 50 micron), complete all as specified and directed.

S&F anodised aluminium partitions, aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, hinges, anodised aluminum snap beading, screws etc. powder coating of any colour (thickness or powder coating not less than 50 micron), complete all as specified and directed.

S&F plain sheet glass 4.8mm thick, of any colour and glazing with and including anodised aluminium snap beading or rubber / neopren bead, fixed in aluminum frame either in window/ventilator or door frame, complete all as specified and directed.

S&F floor door stopper 150mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

S&F for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Taking down aluminium doors/window shutters of any size carrying out minor repair/adjusment of shutter or frame including rubber beading, aluminium beads, cleats of required size and refixing in same position, complete all as specified and directed.

S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specifiee and directed.

S&F 75mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, complete all as specifiee and directed.

S&F aluminium alliy,anodised,sliding door bolt 300mm long with hasp, staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy, complete all as specifiee and directed.

S&F 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F 125mm long extruded aluminium anodised alloy handles, fabricated type, complete all as specified and directed.

S&F MS clamps, hold fast, hook, washer & similar small articles comfirming to Fe-290 Gde-E-165, complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F in repair hasp & staple safety type aluminium with mild steel hing pin including bolt to hinge plate and fixed with screw 100mm, complete all as specified and directed.

S & F in repair continuous (piano) hinges,mild steel, width of flap 30mm (when open) bright finish or electrogalvanised, complete all as specified and directed.

S&F in repair ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed.

S&F in repair of aluminum body door closer (extruded section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

Hacking out old broken glass any thickness size quality or description from metel frame/aluminium frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

M&L for 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and directed.

M&L for sheet glass, 4mm thick ,ordinary quality and glazing with oil putty in sqare exc. 0.5 sqm in each pane, complete all as specified and directed.

M&L for sheet glass, 4mm thick, ordinary quality and glazing with oil putty in sqare n. exc. 0.5 sqm in each pane, complete all as specified and directed.

S&F in reapair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.

M&L for 4mm thick pre-painted E-fibre board, designer/decorative, fixed or laid/inserted to GI snap grid frame size 605x605 mm work for false ceiling hangers with 4mm to 6mm dia. G.I. (length as required) adjusting level, fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners, 12.5mm dia, 40mm long including necessary dismentaling of existing unserviceable ceiling boards of any thickness including cover fillets, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M &L PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in coping, bed plates, filling in MS pressed door/tank frame hold fast blocks etc, including form work, complete all as specified and directed.

M&L for preparing old surfaces of plastered or unplastered surfaces of wall/chajja including brooming down or steel wire brushing, scraping down smoke shoot etc and applying one coat of cement base paint, complete all as specified and as directed.

M&L for complete removal of existing treatmen plastered or unplastered surfaces of wall/chajja including washing rubbing down and scrapping smoke soot moulds, moss and greasing sports with steel wire brush and applying two coat of cement base paint, complete all as specified and as directed.

M & L for preparing old decorated surface of walls and applying one coat of 100% acrylic weather proof exterior emulsion paint of approved colour and shade, complete all as specified and directed.

M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of walls by brooming down and applying one coat of white wash including cornices, pilasters etc, complete all as specified and directed.

All as per item No 96.00 here-in before but on ceiling surfaces, complete all as specified and directed.

M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots and applying two coats of white wash including cornices, pilasters etc, complete all as specified and directed.

All as per item No 98.00 here-in before but on ceiling surfaces, complete all as specified and directed.

M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of walls by brooming down and applying one coat of distemper oil emulsion including cornices, pilasters etc, complete all as specified and directed.

All as per item No 100.00 here-in before but on ceiling surfaces, complete all as specified and directed.

M&L for complete removal of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper including cornices, pilasters etc, complete all as specified and directed.

All as per item No 102.00 here-in before but on ceiling surfaces, complete all as specified and directed.

M&L for preparation of old painted surfaces of wood or wood based material and applying one coat of synthetic enamel paint (1st grade quality) of any description over 10cm width or girth, complete all as specified and directed.

M&L for complete removal of existing treatment of old painted surfaces of wood and applying two coats synthetic enamel paint (1st grade quality) of any description over 10cm width or girth,, complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces and applying one coat of synthetic enamel paint on surface of any description over 10cm width or girth, complete all as specified and directed.

M&L for complete removal of existing treatment of old painted surfaces of steel iron work and applying two coats synthetic enamel paint (1st grade quality) of any description over 10cm width or girth,, complete all as specified and directed.

M&L for complete removal of existing treatment and applying a coat of 2.0mm thick wall care putty on wall etc. including making good any undulation on this surfaces rubbing with sand paper obtained smooth & plain surfaces, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall/ceiling and applying two coats of plastic emulsion over a coat of primer with any colour and pattern, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening, complete all as specified and directed.

M&L for preparation of newly plastered wall / pillasters / vertical surfaces and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed.

M&L for complete removal of existing treatment from walls and appplying 2mm thick wall care putty to obtain a smooth surface including making good any undulations on the surfaces including applying two coats of distemper oil emulsion, complete all as specified and directed.

M & L for obliterating old writing of any description, not exceeding 0.1 Sqm, with synthetic enamel paint to match existing work, complete all as specified and directed.

M & L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30cm high with synthetic enamel paint, complete all as specified and directed.

M & L for writing stops, commas, short lines, dashes, hyphens, brackets etc with synthetic enamel paint, complete all as specified and directed.

Complete removal of existing treatment of any type from walls, complete all as specified and directed.

M&L for applying a coat of 1.5mm thick wall care putty in wall etc. rubbing with sand paper to obtained smooth & plain surface complete all as specified and as directed.

M&L for preparing newly plastered surfaces/applied putty surfaces of internal walls etc and applying two coats of distemper oil emulsion over a coat of alkali resitant primer, complete all as specified and directed.

M&L for three coats of white washing on newly plastered surfaces of ceiling including preparation surfaces, complete all as specified and directed.

M&L for uprooting of tree complete repairing with concrete (1:1/2:3) mixed with water proofing compound as per manufacturer's instructions and at any girth including, complete all as specified and directed.

M&L for preparing of new steel & Iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Cleaning/Uprooting of vegetation/small trees, muds, garbages, waste etc growth on inaccessible RCC roof, AC sheet roof, below wind tie, cleaning of AC sheet/CGI sheet, valley gutter and shaft portion of wall surfaces, back side of toilet portion, complete all as specified and directed.

M&L repair to broken/damaged RCC chajjas/pillar/lintel or similar surfaces by making good with PCC 1:2:4 type B1 or cement mortar 1:3 rendering 15mm thick mixed with water proofing compound to top & sides and soffits in CM (1:4) including necessary form work, reinforecement work if required including demolition of broken/loose PCC or taking down old plaster all complete at any position and upto 10mtr height from ground, complete all as specified and directed.

Dismantling posts or struts any type including taking out embedded portion in concrete/RCC and making good disturbed surface, complete all as specified and as directed.

S&F post and structs in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting and riveting etc and similar work conforming to Fe.290 Gde E-165 including MS screws bolts (machine made) with hexagonal head exc 30 cm long & dia of neck n.exc 12mm, complete all as specified and directed.

S&F in repair for 900mm dia barb (unstretched) conseczal super razor punched tape (SRPBT) aluminium base helix coil with and including necessary GI fixing clips for securing, complete all as specified and directed. Note (i) : No of circles - 51 turns per coil, weight of each coil with hessian pack 13 Kg (+ 0.5), coverage per coil - 8 RM, central core wire :- Made from 2.5mm dia (+ 0.05mm) GI - H.T.S.S wire as per IS -4454 Part l grade SM UTS : 1600N / sqmm with zinc coating of 240 gm per sqm, galvanized as per IS-2629, Razor punched strip - Razor punched tape is CONSEC-ZAL steel comprising of aluminium base with zinc alloy @ 150 gm per Sgm confirming to ASTM A-792 / A-792M with additional primer treatment of epoxy / polyurethane of 2-m micron thick and final paint top coat of certified green shed (BSL 139) by hot dipping process of 15 micron thick, length of barb 23.5mm (+1 mm), width of barb 18.6 mm (+ 1mm), centre to center pitch 36mm (+ 1mm), centre width 7.4 mm (+ 1mm), GI fixing accessories "C" clip 2mm wire diameter, 40mm long, 15mm center dia "U" clip 1mm thick, 28mm straightened length, " J" clip:- 31mm length, 8mm width, 1mm thick. (ii):- Running length of the fencing shall be measured for payment purpose.

S&F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured), complete all as specified and directed

Taking down carefully point wiring of any type, size and description from hard/ teak wood batten/through pipes/casing capping (light, fan, sockets and socket outlets etc) including removal of battens, pipes, plug sockets, socket outlets, switches, shades, ceiling roses, light fittings etc. complete and making good the disturbed surface to match with existing, complete all as specified and directed.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLSH) size 1.5 sqmm drawn in and including PVC casing and caping with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet / modular plate incl continous earth wire of PVC insulated unsheathed, FRLSH multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 129.00 here-in before but one 3 pin 5 Amps socket point on the same board, complete all as specified and directed.

All as per item No 129.00 here-in before but one one 3 pin 5 Amps socket point on independent board, complete all as specified and directed.

All as per item No 129.00 here-in before but for one bell/buzzer point controlled by one pushbutton on the same board with other switches or independent, complete all as specified and directed.

All as per item No 129.00 here-in before but point wiring with 4.0 sqmm cable and 4.0 sqmm earth continuity conductor for 3 pin / 5 pin 15 Amps socket, complete all as specified and directed.

M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade ISI marked including all conduit accessories on concealed wiring including concealed pressed steel terminal box of required size factory made with top cover of ISI Marked plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLSH type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 134.00 here-in before but one 3 pin 5 Amps socket point on the same board, complete all as specified and directed.

All as per item No 134.00 here-in before but one 3 pin 5 Amps socket point on the independent, complete all as specified and directed.

All as per item No 134.00 here-in before but for one bell/buzzer point controlled by one pushbutton on the same board with other switches or independent, complete all as specified and directed.

All as per item No 134.00 here-in before but point wiring with 4.0 sqmm cable and 4.0 sqmm earth continuity conductor for 3 pin / 5 pin 15 Amps socket, complete all as specified and directed.

S&F for switch piano flush button single pole one way 6 amps 240 volts, complete all as specified and directed.

M & L for socket outlet 2 in 1, 3 pin 6 Amp flush type, complete all as specified and directed.

M & L for switch and socket combination 2 in 1, 6A flush type, complete all as specified and directed.

M & L for switch and socket combination 3 pin, 16 Amp, flush type, complete all as specified and directed.

M & L ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and directed.

M & L for lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type AC 230 volt suitable for any type of ceiling fan all as specified and directed.

M & L for bell push, flush type 5 A, complete all as specified and directed.

M & L for bell electric, heahy duty, ding dong type 230 volts single pole, complete all as specified and directed.

Supply and draw sub main wiring in repairs of two run 4.0 sqmm single core PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade, drawn through and including PVC conduit medium duty and accessories of not less than 25mm size ISI marked including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 4.0 sqmm single core PVC insulated unsheathed copper earth continuity including making good disturbed surface including taking down existing dub-main wiring, any numbers of wire and any size, complete all as specified and directed. (Note: Two runs of single core cable with one run of earth continuity conductor including PVC conduit & accessories shall be measured and paid as one length.)

All as per item No 148.00 here-in before but drawn through PVC casing/caping, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 4 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 8 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Triple Pole & Neutral (TPN), suitable for 4way, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F MCB Triple Pole and Neutral (TPN) of capacity 65 to 70 Amps, 415 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

S&F MCB Single Pole and Neutral (SPN) of capacity 50 to 63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

S&F MCB Single Pole (SP) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 1 0 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

S & F wall mounted LED light fitting 1 x 20 Watt, 4 feet long, 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable light fittings, complete all as specified and directed.

Taking down existing light fitting carefully, set aside and re-fixing after point wiring/sub-main wiring work, complete all as specified and directed.

Cutting chases, pinning in, making good to facings in stone concrete wall / blocks / slab where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exc 10cm but n.exc 20cm girth, complete all as specified and directed.

M & L for modular switches 1 way 10 Amp, 1 module, absolute white colour including taking down existing switch carefully and making good to the disturbed surfaces as per existing, complete all as specified and directed.

M & L for modular switches 1 way 20 Amp, 1 module absolute white colour including taking down existing switch carefully and making good to the disturbed surfaces as per existing, complete all as specified and directed.

M & L for modular bell push 6A, 1 module absolute white colour including taking down existing switch carefully and making good to the disturbed surfaces as per existing, complete all as specified and directed.

M & L for modular socket 6A/10A, 2/3 pin combined with safety shutter 2 module, absolute white colour including taking down existing socket carefully and making good to the disturbed surfaces as per existing, complete all as specified and directed.

M & L for modular universal socket 6A/16A, 2/3 pin combined with safety shutter 2 module, absolute white colour including taking down existing socket carefully and making good to the disturbed surfaces as per existing complete all as specified and directed.

M & L modular stepped type electronic fan regulator / dimmer 120 W, 5 step, 2 module AC 230 volt absolute white colour including taking down existing regulator carefully and making good to the disturbed surfaces as per existing, complete all as specified and directed.

M & L modular USB charger with 2 USB ports, supply voltage AC 160-240V~ 50-60Hz, Output - 5V DC, 2A, 2 module absolute white colour including taking down existing regulator carefully and making good to the disturbed surfaces as per existing, complete all as specified and directed.

M & L for AC motor startor switch 20A, 2 module supply voltage AC 160-240V~ 50-60Hz, absolute white colour including taking down existing startor carefully and making good to the disturbed surfaces as per existing, complete all as specified and directed.

M & L 16A main switch DP Operated by Key Tag 240 Volt, AC alonwith key tag complete absolute white colour including taking down existing main switch carefully and making good to the disturbed surfaces as per existing, complete all as specified and directed.

M & L modular crystallight glass cover plate with inner frame 3 module, snow white colour including taking down existing cover plate carefully and making good to the disturbed surfaces by applying wall putty around the cover plate and fixing of all accessoreis as per site requirement, complete all as specified and directed.

M & L modular crystallight glass cover plate with inner frame 4 module, snow white colour including taking down existing cover plate carefully and making good to the disturbed surfaces by applying wall putty around the cover plate and fixing of all accessoreis as per site requirement, complete all as specified and directed.

M & L modular crystallight glass cover plate with inner frame 6 module, snow white colour including taking down existing cover plate carefully and making good to the disturbed surfaces by applying wall putty around the cover plate and fixing of all accessoreis as per site requirement, complete all as specified and directed.

M & L modular mrystallight glass cover plate with inner frame 8 module, snow white colour including taking down existing cover plate carefully and making good to the disturbed surfaces by applying wall putty around the cover plate and fixing of all accessoreis as per site requirement, complete all as specified and directed.

M & L modular crystallight glass cover plate with inner frame 12 module, snow white colour including taking down existing cover plate carefully and making good to the disturbed surfaces by applying wall putty around the cover plate and fixing of all accessoreis as per site requirement, complete all as specified and directed.

Note: An amount of Rs.54,154.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

BHARAT ELECTRIC

M/S DEY ENTERPRISE

M/S BISHAL ENTERPRISES

M/S. NARENDRA KUMAR GARG

M/S. VINITA CONSTRUCTION

M/S ANNI ENTERPRISE

SHRI SURAJIT SIKDER