Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.0 LAccepted-AOC CHENNAI | L1 | Accepted-AOC L1 | |
| 2 | L2₹27.6 L+₹43,494.20 (1.60%)Rejected-AOC | L2 | Rejected-AOC Other than L1 | |
| 3 | L3₹28.1 L+₹91,669.20 (3.37%)Rejected-AOC | L3 | Rejected-AOC Other than L1 | |
| 4 | L4₹28.3 L+₹1.1 L (4.01%)Rejected-AOC C 234 ADG P CHENNAI | L4 | Rejected-AOC Other than L1 | |
| 5 | L5₹28.5 L+₹1.3 L (4.80%)Rejected-AOC C 101 ADG P CHENNAI | L5 | Rejected-AOC Other than L1 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
20 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE DSSC WELLINGTON BARRACKS-POST, WELLINGTON, THE NILGIRIS, TAMIL NADU,PIN-643231
ADDN/ALTN TO QM STORE BLDG NO. 118 AT DSSC WELLINGTON
2022_MES_548856_1
8260/E8
Open Tender
Civil Works
Item Rate
120 days
WELLINGTON
PLEASE REFER TENDER DOCUMENT AND NIT.
8 documents required · 8 mandatory
₹500
GE DSSC WELLINGTON
₹50,000
Yes
1 Oct 2022
31 Aug 2022
22 Sept 2022
31 Aug 2022
20 Sept 2022
14 Sept 2022
Amount
B/R PORTION Demolition of reinforced cement concrete in roofs, floors (other than ground floors, beams, staircases, landing, chajjas and similar suspended work) and removing unserviceable debris off the premises all as specified and as directed.
Dismantling plain or corrugated translucent sheeting any thickness, in roof covering etc., complete all as specified and as directed.
M & L for providing 30 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) mixed with liquid WPC as per manufacturer's instruction, as in roof padding / levelling course kerbs, or chamfered on edges, finished even and smooth with using extra cement all as specified and as directed. Note : Liquid WPC shall be measured and paid separately.
M & L for 5mm thick screed bed or bedding layer of CM (1:3) when the padding concrete is green for floor finishes and mixed with liquid water proofing compound complete all as specified and as directed. Note : Liquid WPC shall be measured and paid separately.
M & L for 3 mm thick APP modified waterproofing membranes weighing not less than 3.6 Kg/Sqm reinforced with non woven polyester matt black finished weighing not less than 160 g/Sqm having softening point not less than 150 degree celcius longitudinal tensile strength not less than 300 N/Sqcm , 10 cm overlap and 15 cm for end laps , overcoat of bitumen primer @ of 0.30 Kg/Sqm and finished with bituminous aluminium paint applied @ 0.10 Kg / Sqm and finished all as per manufacturer's instruction and as directed. Note:-The work shall be carried out by authorised applicator of manufacturer.
Supply only liquid water proofing compound complete all as specified and as directed.
M & L for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc., complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and as directed.
Dismantling stone slab and tiles, laid bedded and pointed in any mortar of any description or thickness in floor, aprons etc., complete all as specified and as directed.
Demolition of unreinforced plain cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing unserviceable debris off the premises all as specified and as directed.
M & L for providing 25mm thick PCC (1:2:4), type B-1 (using 20mm graded stone aggregate) as in sub base all as specified and as directed.
M & L for providing 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub base all as specified and as directed.
M & L for machine cut kota stone slab flooring 18-20mm thick, laid over and including 20mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M & L for machine cut kota stone slab 18-20mm thick, as in riser of steps, skirting, dado and pillar, laid over and including 15mm thick rendering/ backing coat in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M & L for 12mm thick granite tiles of approved colour of size 450 x 300mm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
M & L for Granite stone slab 16-18 mm thick as in flooring, any colour/shade, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding edges as required, laid over 15mm thick screed bed in CM (1:6) over flooring and platforms complete all as specified and as directed.
M & L for Granite stone slab 16-18 mm thick, any colour/shade machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in skirting/dado including grinding and polishing, rounding edges as required, laid over 15mm thick rendering/ backing coat in CM (1:6) over flooring and platforms complete all as specified and as directed.
M & L for vitrified ceramic jointless tiles 8 to 10 mm thick, light shade (square/rectangular) area of each tile exc 0.36 Sqm but n.exc 0.42 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.
Description all as per item No 18 above but on vertical surfaces such as skirting, dado etc, laid over and including 10 mm thick rendering/ backing coat in CM (1 :4) complete all as specified and as directed.
M & L for digital non skid coloured ceramic tiles 7 to 8mm thick, (square /rectangular ) area of each tile exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.
M & L for digital glazed ceramic coloured tiles of size 600mm x 300mm x 7 mm thick in vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile, laid over and including rendering/ backing layer 10mm thick in CM (1:4) complete all as specified and as directed.
M & L for preparation of the surface by cleaning loose particles and grind the surface by applying one coat of Asian Smartcare epoxy primer at 100 gms per Sqm and further applIied with High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane, cold appllication with spray/brush, membrane with an elongation of 550% and tensile strength of 2.5N/Sqmm as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, no leakage upto 7 bars of water pressure as per DIN 1048, shore A Hardness of min 45 as per ASTM D 2240. The system includes final base preparation with water based primer and applying Smart Care PU Magnum or equivalent as approved by GE, in two to three coats to achieve a min thickness of 1.2mm etc., complete all as per manufacturer's specifications and as directed by Engr-in-Charge. Note :- Work will be carried out by authorised applicator with prior approval of GE.
M & L for hard core of broken bricks n.exc 63 mm deposited, spread and levelled in layers n.exc 15cm thick, water and rammed to a true surface complete all as specified and as directed.
M & L for plain cement concrete (1:4:8), type D-2 (using 40mm graded stone aggregate) 100 mm thick, as in sub base of floors and the like, finished even and fair to receive the topping layer complete all as specified and as directed.
M & L for plain cement concrete (1:2:4), type B-1 (using 20mm graded stone aggregate) 40mm thick as in floors and the like finished even and smooth without using extra cement, to an uniform layer in level, complete all as specified and as directed.
Taking down cement or cement lime plaster of any description on brick or stone wall etc incl racking out joints, hacking for key scrubbing down with water etc., and removing unserviceable debris off the premises all as specified and as directed.
Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M & L for Precast cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in cement mortar (1:6) complete all as specified and directed.
M & L for providing precast cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in CM (1:6), complete, in walls all as specified and as directed.
M& L for rendering 15 mm thick in CM (1:6) on fair faces of brick/ concrete surfaces finished even and smooth without using extra cement all as specified and as directed.
Taking door frame with shutter (without taking off shutters from the frames) n. exc. 1.5 Sqm each all as specified and as directed.
Taking door Chowkhats or frames with shutter (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4 Sqm each all as specified and as directed.
Forming jambs, etc. to openings (to foregoing item) in cement mortar 1:4 including cutting toothing and properly bonding into old work also facing, jointing and pointing to match existing work complete all as specified and as directed.
M & L for UPVC fixed ventilators with glazing all as per manufacturer's direction and following specifications :- (i) The profile for UPVC ventilator frame shall be made of PVC material confirming to IS 10151. (ii) The Ventilator frame shall be made of extruded UPVC section having overall dimension of 60 ×60 mm having wall thickness 2.5 mm ± 0.2 mm . (iii) Corners of wall frame shall be jointed by MS galvanized brackets. Joints shall be mitred and plastic welded . (iv) The hinge side vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. (v) Glazing shall be provided with 5mm thick frosted glass fixed with appropriate size beading as per manufacturer's specifications and as directed. Make : Madhu Indrusties/AMD Overseas Ltd/Gadli Industries/ Simta Astrix.
M & L for second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed.
S & F for second class hard wood 35 mm thick plain, framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
M & L for glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; as in windows, ventilators etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and as directed.
S & F 150mm Aluminium anodized tower bolt with cast or sheet barrel and rolled or cast bolts and fixed complete all as specifed and as directed.
S & F 100mm mild steel tower bolt with cast or sheet barrel and rolled or cast bolts and fixed complete all as specifed and as directed.
S & F 300mm aluminium anodised, sliding bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and as directed.
S & F 150mm extruded aluminium alloy handles, fabricated type anodized complete all as specified and as directed.
S & F 100mm extruded aluminium alloy handles, fabricated type anodized complete all as specified and as directed.
M & L for 4.0mm thick Sheet glass, ordinary quality to be fixed in wooden window, ventilators in square or rectangular n.exc 0.5 Sqm in each pane complete all as specified and as directed.
S & F 140mm size floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and as directed.
M & L for mild steel framed work in tubular trusses, sections including special shaped washer, plates, angle cleats etc., complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.
M & L for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 Gde E-165 complete all as specified and as directed.
S & F Lorry hinges mild steel, size 100 mm all as specified and as directed.
S & F 250 mm length mild steel, sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate, and two on staple plate and fixed complete all as specified and as directed.
M & L for welded steel wiremesh fabric supplied and fixed complete to wood or steel members, weight per square metre n.exc 4 Kg complete all as specified and as directed.
M & L for 1.25mm thick mild steel plain black sheet in covering of door shutters etc., jointed or welded in steel frame complete all as specified and as directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.
S & F 15 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes etc., complete to walls and ceilings or laid in floors all as specified and as directed.
Fixing only 15 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes etc., complete to walls and ceilings or laid in floors all as specified and as directed.
S & F 20 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes etc., complete to walls and ceilings or laid in floors all as specified and as directed.
Fixing only 20 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes etc., complete to walls and ceilings or laid in floors all as specified and as directed.
S & F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S & F in repair rotational moulded polythene water storage tanks, 1000 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position, including 20 mm dia ball brass valves, high presured with polyethene float and fly nut complete, screwed for iron pipe all as specified and as directed. Make : Sintex/ Polycon/ Rotex/ Infra/ Plasto/ M/s Vectus Industries Ltd.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line overall as fixed along the centre line over fittings and accessories) all as specified and as directed.
S & F for 75mm bore, PVC (SWR) pipes, type 'B', single socketted, in any length with rubber ring joints, fixed to walls with suitable MS clamps all as specified and as directed.
S & F for 110mm bore, PVC (SWR) pipes, type 'B', single socketted, in any length with rubber ring joints, fixed to walls with suitable MS clamps all as specified and as directed.
S & F for 40mm dia PVC (SWR) pipes, type 'B', single socketted, in any length, with elbow, fixed to walls with suitable MS clamps or concealed in wall and floor all as specified and as directed.
S & F PVC (SWR) bends 75mm bore all as specified and as directed.
S & F PVC (SWR) bends 110mm bore all as specified and as directed.
S & F PVC (SWR) branch piece, double (double Y) 75mm bore all as specified and as directed.
S & F in repair Vitreous China wash hand basin, white, flat back, size 630 x 450mm including brackets, waste coupling, PVC waste pipe etc., complete all as specified and as directed.
S & F for 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed.
S & F in repair Vitreous China wash down water closet, colour white, closed pattern with flat bottom and soft close seat cover and mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain (or outgoing pipe) and including cistern complete all as specified and as directed. Make : Parryware (Cascade Classic), Cat No: C0217 (Coupled Closet) & C0711 (Cistern) or equivalent in Prayag/ Hindware/ Cera or equivalent as approved by GE.
S & F in repair urinal magnum half stall type including spreader and ceramic partition complete all as specified and as directed. Make : Parryware, Cat No : C0575 (Urinal half stall), Cat No : C08095 (Spreader) and Cat No : C0571/507 (Ceramic partition) or equivalent in Jaquar/ Prayag/ Cera/ Hindware
S & F in repair toilet paper holder of stainless steel fixed to wall with chromium plated (CP) brass screws all as specified and as directed. Make : Jaquar, Cat No : ACN1151N or equivalent in Prayag/ Hindware/ Cera/ Parryware
S & F in repair hand drier automatic type all as specified and as directed. Make : ABS hand drier KH07 or Kallerians or equivalent in Cera/ Prayag/ Jaquar
S & F in repairs 15 mm dia angle cock fancy type chromium plated with long shank and cup all as specified and as directed. Make : Jaquar, Cat No : ORP - 10053PM or equivalent in Prayag/ Parryware/ Hindware/ Cera
S & F in repair CP Health faucet with flexible tube 1 Mtr long complete all as specified and as directed. Make : Jaquar, Cat No : ALD 579 or equivalent in Prayag/ Parryware/ Hindware/ Cera
S & F CP two way bib taps 15 mm bore complete all as specified and as directed. Make : Jaquar, Cat No : ORP -10041PM or equivalent in Prayag/ Parryware/ Hindware/ Cera
M & L for 32mm bore Brass chromium plated bottle trap for wash hand basin with inlet and outlet, screwed for pipe or connections and with one cleaning cap and fixed complete all as specified and as directed.
M & L for 100 mm dia PVC floor trap with CP grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and as directed.
S & F Corner glass shelf fixed to wall with suitable fixing accessories complete all as specified and as directed. Make : Jaquar, Cat No : ACN-1173 or equivalent in Prayag/ Parryware/ Hindware/ Cera
S & F in repair Towel ring complete all as specified and as directed. Make: Jaquar, Cat No : AKB-35721 or equivalent in Prayag/ Parryware/ Hindware/ Cera
S & F in repair stainless steel toilet paper holder complete all as specified and as directed. Make: Jaquar, Cat No : AKB-35753 or equivalent in Prayag/ Parryware/ Hindware/ Cera
S & F PVC connection 15 mm size with PTMT Nuts, long 450 mm complete all as specified and as directed.
S & F CP bib taps 15 mm bore complete all as specified and as directed. Make : Jaquar, Cat No : ORP - 10037PM or equivalent in Prayag/ Parryware/ Hindware/ Cera
M & L for 75mm dia of outlet PVC (SWR) multi floor trap with CP grating including jointing with solvent complete all as specified and as directed.
M & L for providing 75mm thick plain cement concrete (1:3:6), type C-2, (using 40mm graded stone aggregates) as in subbase complete all as specified and as directed.
S & F factory made machine pressed chequered cement concrete coloured tiles of size 300mm x 300mm x 22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, laid over and including 20 mm thick screed bed in CM 1 :4 complete all as specified and as directed.
M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and as directed.
Fixing only machine pressed precast concrete interlocking paver block any shape, size and thickness over cushioning complete all as specified and directed. Note : M sand will be measured seperately.
M & L for crused stone sand (M-sand) cushioning complete all as specified and as directed.
M & L for preparing new or previously untreated wooden surface and applying two coats of synthetic enamel paint exc 10 cm width or girth over and including one coat of pink primer complete all as specified and as directed.
M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any shade) over a coat of red oxide zinc chrome primer all as specified and directed.
M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, over and including one coat of wall care putty complete all as specified and as directed.
M & L for complete removal of existing treatment from old plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with brush/roller, over and including one coat of wall care putty complete all as specified and directed.
M & L for preparing old painted wooden surface and applying two coats of synthetic enamel paint exc 10 cm width or girth complete all as specified and as directed.
M&L for preparing old painted steel surface and applying two coats of synthetic enamel paint exc 10 cm width or girth complete all as specified and as directed.
M & L for complete removal of existing treatment from old ceiling surfaces and applying two coats of oil bound distemper over and including one coat of primer and one coat of wall care of putty complete all as specified and directed.
M & L for preparing old plastered /unplastered surfaces of walls and applying two coats of all weather acrylic emulsion (anti-fungal) paint over a coat of primer complete all as specified and as directed.
Demolition and breaking up 150 mm bore concrete / SGSW /AC drain pipes of any description and in any position complete all as specified and as directed.
M & L for salt-glazed stoneware drain pipes 150 mm bore laid in trenches and jointed complete all as specified and as directed.
M & L for PCC (1:3:6) type C-2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200 mm bore complete all as specified and directed.
Cutting into existing manhole for connecting new drain pipes of 150 mm internal dia, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required complete all as specified and as directed.
Labour only cleaning of manholes upto 1.50mtr depth and size complete and throwing the waste/mud out of MoD area all as specified and directed. Note : Cleaning of manhole shall be carried out by mechanically and the rate quoted shall deemed to be included this aspect.
E/M PORTION Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed. Note:Old existing serviceable 4ft light fittings of any type taken down/dismantled to be deposited to MES E/M Storeyard and cost of transportation of the same from site of work to MES E/M Storeyard is deemed to be included in the unit quoted rates.
Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.
Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and directed. Note for Item Nos 101 to 103 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.
M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex. Make of conduit : Precision/Bajaj Plast/ Finolex
(a) One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps.
(b) One switch socket outlet point 5/6 Amps on independent board.
Description all as per Item No 104 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete all as specified and as directed. Note for Item Nos 104 & 105 : (i) Modular metal flush boxes shall be measured & paid separately. (ii) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.
M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.00) Sqmm + (1 x 4.00) Sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex Make of conduit : Precision/Bajaj Plast/ Finolex. Note : (i) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately. (iii) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.
M & L for surface sub-main wiring alongwith earth wire of size (2 x 1.5) Sqmm + (1 x 1.5) Sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex Make of conduit : Precision/Bajaj Plast/ Finolex. Note : (i) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately. (iii) Cost of saddles/ AL clamps of appropriate size is deemed to be included in the unit quoted rates.
S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSXXW061, or techno-commercially equivalent in Legrand/Anchor Roma
S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSXXW161 or techno-commercially equivalent in Legrand/Anchor Roma
S & F Modular shuttered socket outlet 5 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVKSWW065, or techno-commercially equivalent in Legrand/Anchor Roma
S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVKCWW163 or techno-commercially equivalent in Legrand/Anchor Roma
S & F concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX01/02, or techno-commercially equivalent in Legrand/Anchor Roma
S & F concealing modular metal flush box suitable for fixing switches/sockets of 3 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX03 or techno-commercially equivalent in Legrand/Anchor Roma
S & F concealing modular metal flush box suitable for fixing switches/sockets of 4 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX04 or techno-commercially equivalent in Legrand/Anchor Roma
S & F concealing modular metal flush box suitable for fixing switches/sockets of 6 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX06 or techno-commercially equivalent in Legrand/Anchor Roma
S & F modular cover plate suitable for fixing switches/sockets of 01/02 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV01/02 or techno-commercially equivalent in Legrand/Anchor Roma
S & F modular cover plate suitable for fixing switches/sockets of 3 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV03 or techno-commercially equivalent in Legrand/Anchor Roma
S & F modular cover plate suitable for fixing switches/sockets of 4 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV04 or techno-commercially equivalent in Legrand/Anchor Roma
S & F modular cover plate suitable for fixing switches/sockets of 6 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV06 or techno-commercially equivalent in Legrand/Anchor Roma Note for Item Nos 108 to 119 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.
S & F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/CG/Anchor
S & F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit complete all as specified and as directed. Make : Luker, Cat No:LT510P or techno-commercially equivalent in Havells /Philips
S & F Surface and wall mounted LED batten 24 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit complete all as specified and as directed. Make :Luker, Cat No:LT5M24 or techno-commercially equivalent in Havells /Philips
S & F, IP >= 20, Class I, Surface mounted LED square shape slim ceiling light fitting 42 W or next higher rating, CRI >= 80, CT >= 5700 K, suitable for 600 x 600 mm (approx dimensions) suitable for ceilings, integrated type, with high efficiency electronic driver, surge suppressor of 2 KV or more & high brightness LEDs, luminaire efficacy > 95 lumens/Watt, power factor >= 0.90, operating range – 140 to 270 V, 50 Hz with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Havells, Cat No : PLUTOSURFACE2X2 PLS42WLED857S or techno-commercially equivalent in Wipro/Philips
S & F IP >= 65, IK>=07, Class I energy saving and environment friendly long life high power LED as source of building security light of 25W made up of pressure die cast aluminum housing with acrylic cover as diffuser with including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and MS clamps made out of 25x3mm flat iron 2 Nos including nut and bolts for fixing the bracket and making connections in flexible conduit complete all as specified and as directed. Make: Havells, Cat No : ENDURASUNDOWN SL25WLED767PASYBOPCIHD (Endura Pearl) or techno-commercially equivalent in Wipro/Philips
Imp Note for Item Nos 121 to 124 : (i) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. (ii) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.
Supply, install, testing & commissioning of Exhaust fan, PVC body with connected accessories 250 mm sweep, single phase, 240 Volts, AC, 50 Hz, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air DX or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates
Supply, install, commissioning & testing of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator/other surfaces etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DB or techno-commercially equivalent in Usha/Crompton.
Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates. (ii) Design / drawing / BOM / technical specifications of Exhaust Fans showing the dimensions etc. is to be obtained from OEM / Auth Channel Partner / Supplier & is to be got approved from Engr-in-charge & GE before placing final order. Techno-Commercial Comparative Analysis is also required to be submitted to Engr-In-Charge & GE wherever equivalency w.r.t. a given Make/Model/Cat-Part Ref is concerned. (iii) The cost of providing a suitable square shaped netted (wire mesh) structure as Bird/Animal screen guard on the Inner surface of the Window/Wall incl connected works viz. steel/welding work etc. for fixing/installation of the same is also deemed to be included in the unit quoted rates. (iv) Cost of any welding work required for succesful completion of the work /job is deemed to be included in the unit quoted rates
S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A C Series with Breaking capacity 10KA complete all as specified and as directed. Make: L&T, Cat No : DBMPS120SD or techno-commercially equivalent in Legrand/Siemens
S & F SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed. Make: L&T, Cat No: DBSPN012DD or techno-commercially equivalent in Legrand/Siemens.
S & F SPN DB, 8 Way IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed. Make: L&T, Cat No: DBSPN008DD or techno-commercially equiv in Legrand/Siemens. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.
S & F SPN DB, 4 Way IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed. Make: L&T, Cat No: DBSPN004DD or techno-commercially equivalent in Legrand/Siemens. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.
S & F MCB DB,DD,TPN 6 Way,415 Volts,IP43,IK-09 with busbar & blanking plates including making good the disturbed surfaces complete all as specified and as directed. Make: L&T, Cat No: DBTPN006DD or techno-commercially equivalent in Legrand/Siemens. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.
S & F MCB TPN 63A,10KA,'C' Series complete all as specified & as directed. Make: L&T, Cat No : BB40630C or techno-commercially equivalent in Legrand/Siemens.
S & F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make : L&T, Cat No:BB20320C or techno-commercially equivalent in Legrand/Siemens.
S & F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make : L&T, Cat No : BB10320C or techno-commercially equivalent in Legrand/Siemens.
Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core passing through GI pipe / fixed along with wall with suitable steel clamp etc with all fixing & connecting accessories complete all as specified & as directed. Make :Havells/ Gloster/ Polycab Note : Cost of MS clamps when fixed alongwith wall/ other surfaces is deemed to be included in the unit quoted rates.
Supply and laying light grade GI pipe (ISI Marked) of size 40 mm for cable protection to be fixed on wall/pole/Road Crossing with necessary clamps as per existing or in road crossing complete all as specified and as directed. Note :- Unit rate quoted is deemed to be inclusive of MS clamps if required to be fixed on pole/Wall Make : Tata/ Jindal/ Prakash.
M & L for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI strip of size 32x6 by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 40mm bore medium grade GI protection pipe (upto 7.5mtr long) for earth and 20mm GI medium grade for watering including PCC chamber pit & cover with suitable lifting hooks, with funnel, wire mesh, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified & as directed. Note: On testing after completion, if the desired earth resistance is not obtained the earthing shall be redone at no extra cost till the entire satisfaction of Engr-in-Charge.
HRML CONSTRUCTIONS
Shree Amritha builders
GMS Builders
ACE PROMOTERS
K.AYYAPPAN
S.RAMACHANDRAN
AM BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .