CA NO GE S U 45 2023 24 ADDN ALTN TO BLDG NO NP 40 BOUNDARY WALL AND PROVN OF DRAIN COVER FROM BLDG NO P 05 TO P 30 AT HQNC UNDER GE SOUTH UDHAMPUR

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in foundation complete all as specified and as directed.

RCC M-25 mix using 20mm graded crushed stone aggregates as in foundations including rafts, footings foundation , beams , plinth beams , bases for columns etc, basement slabs, under - reamed piles and mass concrete complete all as specified and as directed.

RCC M-25 mix using 20mm graded crushed stone aggregates as in columns, pillars, piers posts and struts complete all as specified and as directed.

RCC M-25 mix using 20mm graded crushed stone aggregates as in beams, cantilevers, lintels over 1.5m span complete all as specified and as directed.

Mild Steel TMT bars upto 10mm dia and over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Mild Steel TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintes,cantilevers, shelves including supports, overhangs, etc also splays beteen floors and beams finished rough surfaces of concrete complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and as directed.

Walling of random rubble masonary, rectangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed.

Raised pointing to random or polygonal rubble, uncoursed on brought upto courses random rubble stone masonary in cm 1:3 complete all as specified and as directed.

Precasted RCC jallies 40mm thick (measured solid ) including all mouldings but excluding frames conforming to type B-0 using 12.5mm graded crushed stone aggregate complete all as specified and as directed.

Hand rails, half round or other stock section or core for wooden hand-rail straight portion drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc complete all as specified and as directed.

Rolled mild steel Fe-410w (Gde-E-250) quality 'B' Roof trusses (framed ) , trussed, purlins, crane gantries , rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc. complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position and in un framed work complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

10-12 mm thick gypsum boards seemless false ceiling including sunk or raised moulding or cop design as approved, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rawel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface complete all as specified and as directed. Note : (a) Design of ceiling board as approved by GE. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer.

Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on 5mm thick PVC sheet fillet of width 35mm for wall panelling, complete all as specified and as directed.

Granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking platforms and the like not less than 1 Sqm (in one piece), laid over 15mm thick layer of cement mortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and as directed.

Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm each including iron mongry complete all as specified and as directed.

Taking down frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each including iron mongry complete all as specified and as directed.

Solid PVC moulded door frame of size 50mmx47mm made out of 5mm plain wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube and fixing in opening, complete all as specified and as directed.

Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site complete all as specified and as directed.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and as directed. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and as directed. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

8mm thick Toughned glass (tinted/etching on glass) as in windows, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed.

Venetian blinds of approved make, vertical type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and as directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Kitchen cabinet/cupboard in required size at site made out 18 mm thick one side decorative lamination sheet consisting of carcass 18/20 mm thick PVC sheet & provn of shutters made out of 18mm thick one side decoartive laminated PVC sheet all reqrired brackets 5.5 screws etc. the panels shall be fabricated using adhesive and screws where ever required. All the edbes shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish, necessary drawer, openable shelve with frame work complete as per make and specification mention as per drawing with locking arragement approved by Engr-in-Charge. Colour as approved by GE. (Make: Rajshree/Sintex or equilent) complete all as specified and as directed.

S&F PVC steel catcher of superior quality complete all as specified and as directed.

Supply only Stainless steel basket (plain), SS plate basket(11-13 division), SS partition basket, SS Cutlery basket, SS grid basket of size as per manufacturer/ as directed by Engr in Charge made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Cat Part No WA/POB/15204.

Hetich softcloser hinges of stainless steel premium quality complete all as specified and as directed.

Fancy type Brass handles 100mm size fixed with screws, complete all as specified and as directed.

30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed.

Mild Steel cold rolled butt hinges medium weight 100 mm long complete all as specified and as directed.

200 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified.

150 mm length Aluminium handles fabricated type anodised complete all as specified.

20mm dia mild steel powder coated fancy type tubular curtain rail with brackets and end bulb as per reqirement complete all as specified and as directed.

Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, complete all as specified and as directed.

Gun metal globe or gate valve 20mm , with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down old GI tubing complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down old GI tubing complete all as specified and as directed.

S&F in repair Sinks with draining board made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts 600mm long, fixed in repairs, complete all as specified and as directed.

S&F in repair table top vitreous chinaware wash hand basin (WHB) white size 550mm x 400mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete all as specified and as directed. Make : Cat Part No LYS-WHT-38931.

5 mm thick looking mirror of required size, fixed on walls with dash fasteners and chromium plated screws purpose fully made to fix the glass by drilling hole in the glass complete all as specified and as directed.

Water closet single piece wall mounted pattern single piece of size 535 x 380 x 400 mm in repair as approved and complete all as specified and directed. Make : Cat Part No LYS-WHT-38851S300UFSMN.

S & F in repairs 15 mm dia WHB mixer chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specifie and as directed. Make - Cat Part No KUP-35011BPM.

S & F in repairs 15 mm dia wall mixer 3 in 1 chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specifie and as directed. Make - Cat Part No FON-40119.

S & F in repairs 15 mm dia Sink mixer chromium plated screwed down highpressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified Make - Cat Part No LYR-38165.

200 mm dia brass chromium plated shower rose with swivel joints in repair complete all as specified and directed. Make : Cat Part No OHS-35497.

15 mm bore Bib tap in repair complete all as specified and directed. Make :Cat Part No CON 107KN.

S&F in repairs 15 mm dia Angle valves/ stop cock ,fancy type and chromium plated screwed down highpressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and as directed. Make - Cat Part No KUP-35053PM.

Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe in repair complete all as specified and directed. Make : Cat Part No ALD-573.

Chromium plated toilet paper holder complete all as specified and directed. Make : Cat Part No ACN 1153N.

600 mm long brass chromium plated towel rail fancy type complete all as specified and directed. Make : Jaquar Cat Part No ACN-1111NM.

Towel rack complete all as specified and directed. Make : Cat Part No ACN 1181FN.

Soap dish complete all as specified and directed. Make : Jaquar Cat Part No ACN 1131N.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

110 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall or trenches complete all as specified and as directed.

110 mm PVC (SWR) bends any radius with access door complete all as specified and as directed.

Demolition Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Hardcore of broken stone or boulders of gauge exc. 63mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and as directed.

75 mm thick PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in sub base complete all as specified and as directed.

25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in level course on floor etc complete all as specified and as directed.

Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished , area of each tiles exc 0.36 Sqm but n exc 1.00 Sqm as in floors or walls set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer in cement mortar 1:4 complete all as specified and as directed.

Glazed coloured Ceramic tiles in vertical surface 300x600x7mm thick laid over 10 mm thick screed bed in CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

Coloured exterior wall cladding tiles (stone series) in vertical surface 300x600x7mm thick laid over 10 mm thick screed bed in CM 1:4,set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

Vitrified Dura stone tiles of size 300 x 300 x 10mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and as directed.

75mm thick PCC 1:3:6 type C-2 as plinth protection, finished even and fair without using extra cement complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified.

Rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified and as directed.

Rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified and as directed.

Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for drain cover, manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) complete all as specified and as directed.

Applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and as directed.

Material & Labour applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed.

Plain cement concrete1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in channels and drains, foundation and similar work etc complete all as specified and as directed.

PCC 1:2:4 type B-0 (12.5mm graded crushed stone aggregate) as in coping, benching and similar work etc including necessary form work complete all as spcified and as directed.

RCC 1:2:4 type B1 using 12.5mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork complete all as specified and as directed.

Mild Steel TMT bars 6-8 mm dia and over, cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and as directed.

Mild Steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

25mm thick PCC type B-0 using 20mm graded crushed stone aggregate as in sub base for laying floor finishes complete all as specified and directed.

Chequered cement concrete (glossy finish) tile 25cmx25cmx25mm thick or 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with mixture of grey cement and white cement and no pigment and including 15mm thick screed bed cement mortar 1:6 complete all as specified and as directed.

Vitrified Dura stone tiles of size n exc 0.36 Sqm of 10mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and as directed

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power/ LED Light fittings) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as specified and as directed keeping the LED lights in safe custody.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and as directed

Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and as directed

Disconnecting and taking down un serviceable light fittings of any description/ capacity complete all as specified and as directed

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly complete all as specified and as directed. Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish.

All as per srl item No 100 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed

All as per srl item No 100 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed

All as per Srl item No 100 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly complete all as specified and as directed.

S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and as directed.

S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and as directed.

S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC, with outer/inner cover complete all as specified and as directed.

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and as directed.

Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Block complete all as specified and as directed.

S&F in replacement single pole and neutral enclosure surface mounted 240 voltswith 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of complete all as specified and as directed.

Supply and fixing in replacement LED lights fitting 1x 20W, 230V,AC decorative box type warm white colour with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F of decorative wall mounting 1X4W nickle finish fixture with frosted glass along with 4W warm white bulb GLS lamp luminaire complete all as specified and as directed.

Supply and fixing in replacement LED luminaire 15 watt, 220 V AC recess mounted downlighter type with high efficiency PC diffuser soft light and symmentrical illumination complete with driver, holders & LED lamp warm white suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in replacement Sheet metal enclosure double door type for MCCB TPN DB upto 125 Amps, 4 way vertical type 415 volts with 400 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed.

S & F replacement MCCB Three Pole & Neutral capacity of 125 amps 415 volts rupturing capacity 16 KA complete all as specified and as directed.

S&F in replacement Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 08 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed.

S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed.

S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA, inculding providing thimble for out going cable complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead Including taking down old sub main wire complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead including taking down old sub main wire complete all as specified and as directed.

Supply and fixing LED building security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection complete all as specified and as directed.

Supply and fix ceiling fan, AC single Phase. 230V of size 1200mm sweep with, blades, and frame along with all electrical wire connection complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost complete all as specified and as directed.

Material and labour for Fixing & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmm x 3.5 core size all as specified including taking down old cable.Note : Earth work and other connected work shall be measured & paid sperately complete all as specified and as directed.

Excavation in trenches and exceeding 1.5m wide and not exc 1.5m in depth in hard and dence soil and getting out complete all as specified and as directed.

Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and as directed. Note : for payment purpose punned thickness shall be measured

Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels all as specified.

Supply and fixing in repairs GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed.

Material & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 4 Sqmm x 2 core size complete all as specified and as directed including taking down old cable.Note : Earth work and other connected work shall be measured & paid sperately.

Supply and fixing post top lantern/Gate light LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp wit construction of foundation complete all as specified and as directed.

VISHWANATH AND SONS

SINGH CONST CO

VARDHMAN INTERNATIONAL

RAMAN CONSTRUCTION CO