VARANASI NAGAR NIGAM KSHETRA KE ANTARGAT GALI PIT, MANHOLE, PULIYA, GALI (CHOWKA VA INTERLOCKING) KI MARAMMAT/NIRMAN VA KUWO KI SAFAYI, BOUNDRY WALL, BOARD ETC KA KARYA

Amount

okjk.klh uxj fuxe {ks= ds vUrxZr Hkou@ikdksZ@QqVikFk@xyh fiV@esugksy@ukyh@iqfy;k@xyh ¼pkSdk vFkok b.VjykWfdax½ ejEer dk dk;ZA

Earth Work in Excavation in ordinary soil including lift upto 1.50m and lead upto 30.00m including filling watering and ramming of excavated earth etc. all complete as per the direction of engineer in change.

Providing every additional 30.00m lead or for every additional 1.50m lift or part.

Sand filling in the plinth work all complete

Providing & laying of cement concrete work in 1:6:12 cement, fine sand and 40mm gauge brick ballast with all complete (Ref.. to Spec. Nos.- 273)

Concrete with 4cm. gauge brick ballast, sand of 1.25 FM. and cement in proportion of 10:5:1 in foundation and under floors including supply of all materials labour and tools and plants etc. required for proper completion for the work. (Ref.. to Spec. Nos.- 274)

Concrete with 4cm. gauge brick ballast, sand of 1.25 F.M. and cement in proportion of 8:4:1 in foundation and under floors including supply of all materials labour and tools and plants etc. required for proper completion for the work. (Ref.. to Spec. Nos.- 275)

Cement concrete with 4cm. gauge approved stone ballast, approve coarse sand and cement in the proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of the work. (Ref.. to Spec. Nos.- 279)

Same as 1.60 but 2cm gauge approved stone ballast. (Ref.. to Spec. Nos.- 279 b)

Concrete with 4cm. gauge approved stone ballast, approved coarse sand and cement in the proportion of 6:3:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work.

Providing & laying of cement concrete work in 1:4:8 cement, course sand and 40mm gauge stone ballast with all complete. (Ref.. to Spec. Nos.- 281)

Cast cement concrete as in door sills, chaukhat boundary post as similar precast unit with cement, approved coarse sand and 20, gauge approved stone ballast in the proportion of 1:24 (class-150) excluding supply of reinforcement and its bending but including its fixing in position and binding with 24 B.W.G.G.I. binding wire and including necessary scentring and shuttering etc,. and also including supply of all material, labour, T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. (Ref.. to Spec. Nos.- 282)

R.C.C. work in 1:2:4 cement, course sand and 20mm gauge stone ballast for lintel of door and windows excluding reinforce. (Ref.. to Spec. Nos.- 283)

R.C.C. work in 1:2:4 cement, course sand and 20mm gauge stone gritt for & slab excluding reinforcement with all complete. (Ref.. to Spec. Nos.- 284)

R.C.C. work in 1:2:4 cement, cource sand and 20mm gauge stone gritt for R.C.C. beam, slab, roof and colomns excluding reinforcement with all complete. (Ref.. to Spec. Nos.- 288)

M-150 class brick work in 1:4 cement and fine sand mortar with all complete.

M-150 class brick work in 1:4 cement and fine sand mortar with all complete.

M-150 class brick work in 1:3 cement and course sand mortor of half brick thick wall in supor structure work all complete

M-150 class brick work in 1:3 cement and course sand mortar of wall staining with work all complete

M-150 class brick work in 1:4 c/s mortar in foundation etc all complete work

M-150 class brick work in 1:4 c/s mortar in Super structure etc all complete work

Providing & laying of 2.5cm thick D.P.C. work in 1:1:5:3 cement, course sand and 13mm gauge stone gritt with all complete

Supply and fixing of 35mm thick single leaf flush door commercial quality with all complete

Supply and fixing of 40mm thick double leaf flush door commercial quality with all complete.

M.S or Iron work in heavy size such as trusses, built up gate, record racks, roof work, gates etc. including riveting, welding etc, with all complete. (Ref.. to Spec. Nos.-503)

M.S or iron in plain work such as in reinforced concrete or R.B. work including the cutting bending, welding etc.with all complete. (Ref.. to Spec. Nos.-504)

Providing and fixing inposition collapsible steel shutter with vertical channel 20x10x2mm and braced with flat iron allagonals 20mmx5mm size with top to bottom rail of T-iron 40x40x6mm with all complete. (Ref.. to Spec. Nos.-518)

Providing and fixing of fan hook 16 mm dia M.S Bar with all complete. (Ref.. to Spec. Nos.- NBO 11.20)

Providing and fixing of box type fan hook with fixing of 12mm dia plain bar in position with all complete. (Ref.. to Spec. Nos.- NBO 11.22)

Providing & laying itegral cement based water proofing treatment iclu. Preparation of surface as per required with all complete. (Ref.. to Spec. Nos.- CPWD 22.7)

Struck pointing work in 1:2 cement and course sand mortor with all complete. (Ref.. to Spec. Nos.- 574)

Flush pointing work with 1:2 cement and course sand mortor with all compete. (Ref.. to Spec. Nos.- 575)

As in Ref.. to Spec. Nos. 1.24 and 1.25 above but for in floors with struck pointing. (Ref.. to Spec. Nos.- 576 a)

As in Ref.. to Spec. Nos. 1.24 and 1.25 above but in floors with flush pointing. (Ref.. to Spec. Nos.- 576 b)

Struck cement pointing with 1:2 cement and sand of 1.25 fineness modulus mortor with coloring materials to match the brick work colour including supply of all materials, labour, tooks and plant etc. required for proper completion of work. (Ref.. to Spec. Nos.- 578)

12mm thick plaster with cement mortar in proportion of 1:2 cement and sand of 1.25 F.M. over brick work minimum thickness Nost be less than 10mm including supply of all materials labour and T&P etc required for proper completion of the work. (Ref.. to Spec. Nos.- 580)

12mm thick plaster with cement mortar in proportion of 1:2 cement and sand of 2.25 F.M over brick work minimum thickness Nost be less than 10mm including supply of all materials, labour and T&P etc required for proper completion of the work. (Ref.. to Spec. Nos.- 581)

12mm thick plaster with cement mortar in proportion of 1:3 cement and sand of 1.25 F.M over brick work minimum thickness Nost be less than 10mm including supply of all materials, labour and T&P etc required for proper completion of the work. (Ref.. to Spec. Nos.- 582)

12mm thick plaster with cement mortar consisting of 1 part cement and 3 part of approved coarse sand. Minimum thickness Nost be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work. (Ref.. to Spec. Nos.- 583)

As in Ref.. to Spec. 1.32 above but with cement and sand of 1.25 fineness modulus mortar in 1:4. (Ref.. to Spec. Nos.- 584)

(a) as in Ref.. to Spec. 1.32 above but with cement and sand of 1.25 fineness modulus mortar in 1:6. (Ref.. to Spec. Nos.- 586)

Add for extra labour to all Ref.. to Spec.s of plaster if done in ceiling. (Ref.. to Spec. Nos.- 587)

Add for extra labour and material for plaster over rough face of one brick wall. (Ref.. to Spec. Nos.- 596)

20mm thick plastering work in dedo & skirting in 1:2 cement and approved course sand mortar with 3mm thick neat cement etc including with all complete. (Ref.. to Spec. Nos.- 597)

Providing & fixing of corrugated GS sheet roating with 0.80mm thick size coating Nost less than 276 gm/Sqm with all complete work. (Ref.. to Spec. Nos.- DSR 12.1.2) 1297.55x0.735=923.89

Supply and fixing of 10cm internal dia A.C. down pipse complete with rose heads bends and gratings and including supply of necessary M.S. clamp 25cmx3mm fixed to walls with and including supply of 15cm long 6mm dia nailsall material labour and T & P etc. required for proper completion of the work and also including repair of plaster, pointing etc. it damaged during fixing of the nines. (Ref.. to Spec. Nos.- 730)

Cleaning silt from road culvert upto 6m (20) span & in a length of 18m (60) & throwing the earth sailt to the place within road boundry including dressing leveling & remming the same as directed by the Engineer-in-Charge

Opening and Ref..lexing 10cm (4) rain water down pipes after cleaning including supply of all materials, labour an T & P etc required for proper

Supply and laying of 125 micron polythene sheet under the foundation (for anti salt peter treatment) or over sub- base to at as separation between sub-base and conc slab (for CC road slab) including supply of all meterials, labour T & P required for proper completion of the work.

Wax or French polishing new wood work with approved ready made wax polish or approved French polish after rubbing down with sand paper including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (Ref.. to Spec. Nos.- 658)

As in Ref.. to Spec. 1.32 but repolishing wood work, already wax or French polished with approved ready made wax polish including supply of all materials labour and tools and plants etc. required for proper completion of the work. (Ref.. to Spec. Nos.- 659)

Finishing walls with water proof cement paints of approved make and quality on new work with two coat togive an even shade including supply of all material labour and T & P etc. required for proper completion of the work. (Ref.. to Spec. Nos.- 660)

Same as in Ref.. to Spec. 1.34 but for each coat of water profing cement after the first two coats to given & even shade. (Ref.. to Spec. Nos.- 661)

Finishing walls one coat of the water proof cement pain of approved quality on previously old treated surface with thid paint to give an even shade including supply of all materials labour tools & plants etc. required for proper completion of the work. (Ref.. to Spec. Nos.- 662)

Finishing walls with Premuim Acrylic Smooth oxterior paint with Silicon additives of required shade New Work (Two or more Coats applied @ 1.43 Ltr/10Sqm over and including base). (Ref.. to Spec. Nos.- CPWD 13.47.1)

Wall painting (two coats) with plastic emulsion paint of First quality approved brand and manufacture on undecorated wall surface to give an even shade including thoroughly brushing the surface free from mortordroppings and other foreign matter and sand prepared smooth. (Ref.. to Spec. Nos.- NBO 18.57)

Wall painting (two coats) with plastic emulsion paint of Second quality approved brand and manufacture on undecorated wall surface to give an even shade including thoroughly brushing the surface free from mortor droppings and other foreign matter sand prepared smooth. (Ref.. to Spec. Nos.- NBO 18.57)

Same as above but one coasts for old surface as per (Ref.. to Spec. Nos.- NBO 18.57). (Ref.. to Spec. Nos.- NBO 18.58)

Applying one coat of white cement over new surface including rubbing with sand paper including all materials T & P etc. required for proper completion of the work. (Ref.. to Spec. Nos.- NBO 18.52)

Painting or varnishing new iron work in small area or new wood with one coat (up to one sq. meter) of ready mixed priming paint and one coat of approved superior quality ready mix paint of clear synthetic varnish including supply of materials labour and T&P etc. required for proper completion of work. Paint to be used should confiRmt to the ISI Nos. 103 1950. (Ref.. to Spec. Nos.- 641)

As in Ref.. to Spec. Nos.- 641 above but for every coat after first coat. (Ref.. to Spec. Nos.- 642)

As in Ref.. to Spec. Nos.- 642 above but for every coat on previously painted old wood or steel work. (Ref.. to Spec. Nos.- 643)

Painting roofs or other iron work in large area with one coat of ready mixed paint primer and one coat approved paint (British, ANISOLE or equivalent) including supply of all material, labour and T&P etc. required for proper completion of the work. Pain to be used should confiRmt the I.S.I Nos. 103-1950 cost for area 650sqf. priming coat. (Ref.. to Spec. Nos.- 644)

As in Ref.. to Spec.Nos.- 644 above but for every coat after first coat. (Ref.. to Spec. Nos.- 645)

As in Ref.. to Spec. Nos. 645 above but for every coat over previously painted surface. (Ref.. to Spec. Nos.- 646)

Providing and placing on terrace (at all floor levels) Polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ovRef..low pipes but without fittings and the base support for tank. (Ref.. to Spec. Nos.- 18.48)

Supply and fixing of 4.5 cm (1.3/4") thick C.P. teak wood part panelled and part glazed door and window shutters including supply and fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts locks, handles spring and / or other fittings but excluding their supply and including painting with two coats of Black Japan on all Iron fittings if necessary & including fixing the glass panes with putty & bard. Glass to be 0.64kg (21 oz) fittings with necessary screws. (Ref.. to Spec. Nos.- 409)

Additional cost of fixing glass panes with CP.Teak wood beading and felt as desired by the Engineer Incharge instead of with putty and brads including cost of all material T&P etc. required for proper completion of the work. (Ref.. to Spec. Nos.- 410)

As Ref.. to Spec. Nos.-409 above but fully panelled. (Ref.. to Spec. Nos.- 411)

As Ref.. to Spec. Nos.-409 above but fully glazed. (Ref.. to Spec. Nos.- 412)

As Ref.. to Spec. Nos.-409 above but in Shisham wood. (Ref.. to Spec. Nos.- 419)

As Ref.. to Spec. Nos.-412 above but of Shisham wood. (Ref.. to Spec. Nos.- 421)

As Ref.. to Spec. Nos.-419 above but 4cm (1.51) thick. (Ref.. to Spec. Nos.- 422)

As Ref.. to Spec. Nos-421 above but 4cm (1.5") thick. (Ref.. to Spec. Nos.- 423)

Supply & fixing If flush doors commercial quality confoRmting to IS. 2202 Part-I (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges, bolts locks, handles, springs and other fittings but excluding their supply and including painting with two coasts of black japan paint on iron fitting if necessary. with necessary screw complete. (Single Leaf 32mm). (Ref.. to Spec. Nos.- 470)

Rolled steel Joists fixed in position excluding cost of joists which will be supplied free at site but including all labour in handling and hoisting and including hire etc of necessary T & P. (Ref.. to Spec. Nos.- 501 a)

Supply & fixing of Rolling Shutters of approved desinged made of 80 x125mm (3 x18 guage) cold rolled MS lath interlocked throughout their entire length and jointed together at the end by end locks brackets side guides and arrangements for inside and outside pocking with push & pull operation completion and including the cost of top cover and spring rwquuired for proper completion of the work as per direction of E/I. (Ref.. to Spec. Nos.- 520)

Providing /applying of wall paint painting of different shape and colour etc all complete work.

Earth work in cutting & cartage up to 8.00 km with all complet.

Supply, laying & compaction of G.S.B (Grade-1) with all complete.

Reseting of stone chauka with 1:6 cemen & fine sand mortar incl. pointing in 1:2 etc. with all complete work.

Supply & laying of new stone chauka laid in 1:6 cement & fine sand mortar & pinting with 1:2 cement and coarse sand mortar with all compete.

Raising & Repairing of Manhole upto 30cm height with all complete.

Raising & Repairing of House Drain Pit upto 30cm height with all complete.

Construction of Manhole of size ( 600x600x1200)mm with stone cover with all complete.

Construction of Gully Pit of size (600x600x900)mm including mild steel gratting jaali with all complete.

Supply, laying & Jointing of 230mm dia S.W. pipe with all complete.

Supply, laying & jointing of 300mm dia NP-3 R.C.C hume pipe with all complete.

Providing and fixing Soil, Waste and Vent Pipe 100mm dia sand cast iron S & S pipe. (Ref.. to Spec. Nos.- 17.35)

Supply & laying of 80mm thick CC Interlocking tiles with all complete.

Supply & Laying of 80mm thick rubbeRmtoulded C.C. Zig-Zag shape Interlocking tiles in gray colour with all complete.

Supply & Laying of 80mm thick rubbeRmtoulded C.C. Zig-Zag shape Interlocking tiles in red colour with all complete.

Supply & laying of precast C.C. block K.C. Drain with base concret in 1:6:12 cement fine sand & 40mm gauge brick ballast with all complete.

Providing & fixing of R.C.C manhole cover of size (600x600)mm including frame with all compete.

Providing & fixing of R.C.C. Gully grating including frame with all complete.

Supply of Laying MH RCC Frame Cover including of all complete work etc.

Dismantling of brick on edge soiling with all complete. (Ref.. to Spec. Nos.- 2.6 d)

Dismantling of brick on flat soiling with all complete. (Ref.. to Spec. Nos.- 2.6 d)

Scrapping of old painted surface including disposal of all scrap meteial to a distance of 30m with all compete. (Ref.. to Spec. Nos.- 772)

Running of 5HP pump for dewatering including arrangement of pump suction & delivery pipe & other accesseries at site including cost of POL.

Running of 8HP pump for dewatering including arrangement of pump suction & delivery pipe & other accesseries at site including cost of POL.

Running of Tractor pump for dewatering including arrangement of pump suction & delivery pipe & other accesseries at site including cost of POL.

Cleaning of drain in foul condition & ordinary soil etc all complete.

Disposal of silt/Malba upto 8 km etc all complete.

25mm thick 1:2:4 plain C.C. flooring with base 1:4:8 with C/S and 40mm gauge brick ballast etc all complete. (Ref.. to Spec. Nos.- 601)

25mm thick 1:2:4 plain CC flooring witout base all complete. (Ref.. to Spec. Nos.- 601 b)

S/F of 6mm (1/4") china white gauge tiles flooring etc. all complete. (Ref.. to Spec. Nos.- 628)

Protection of Emabankment of filling breached portion with Empty Bags Filled with sand in FC Bags etc all complete work.

Manufacturing, supplying & fixing of retro Ref..lective sing board made up of 2mm thick alluminium sheet etc all complete work. (DSR Nos.- 16.59.1) (7183.35x0.735=5279.76)

Cleaning of silt/malba from well with the help of rope, bucket & labour etc with all complete

Providing & spreading of bury lime into the well with all complete

Dismantling existing plaster including disposal of Ref..use as directed by Engineer-in-charge within a distance of 60m. (Ref.. to Spec. Nos.- 701).

Dismantling single tiled roof of any kind including stacking of dimantled materials as directed by engineer-in-charge within a distance of 60m. (Ref.. to Spec. Nos.- 691)

Scraping of old white or colour wash including disposal of Ref..use as directed by Engineer-in-charge within a distance of 60m. (Ref.. to Spec. Nos.- 708)

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-in-charge within a distance of 60m. or 200 feet. (Ref.. to Spec. Nos.- 692)

Supply and fixing of M.S. board for site detial

Dismantling of old damage stone chauka inculiding with all comp. work. (Ref.. to Spec. Nos.- 698)

P/F of 65mm thick (+/-2) chunar sand stone flooring over 20mm average thick Base of cement mortar 1:5 (1 cement : 5 Coarse sand) with joints 3mm thick side buttered with cement mortar in 1:2 (1 cement : 2 stone Dust) admixed with pigment to match the shade of stone and pointing with same mortar red sand stone with all complete.

Lettering with black japan paint of approved brand and manufacture. (DSR Nos.- 13.71) (615x.0735=4.52)

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having theRmtal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This ncludes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. internal work. exposed on wall. (Ref.. to Spec. Nos.- 18.7) 15mm Nosminal outer dia pipes

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having theRmtal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This ncludes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. internal work. exposed on wall. (Ref.. to Spec. Nos.- 18.7) 20mm Nosminnal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having theRmtal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This ncludes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. internal work. exposed on wall. (Ref.. to Spec. Nos.- 18.7) 25mm Nosminnal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having theRmtal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This ncludes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. internal work. exposed on wall. (Ref.. to Spec. Nos.- 18.7) 32mm Nosminnal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having theRmtal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This ncludes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. internal work. exposed on wall. (Ref.. to Spec. Nos.- 18.7) 40mm Nosminnal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having theRmtal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. concealed work, including cutting chases and making good the walls etc. (Ref.. to Spec. Nos.- 18.8) 15mm Nosminnal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having theRmtal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. concealed work, including cutting chases and making good the walls etc. (Ref.. to Spec. Nos.- 18.8) 20mm Nosminnal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having theRmtal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. concealed work, including cutting chases and making good the walls etc. (Ref.. to Spec. Nos.- 18.8) 25mm Nosminnal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having theRmtal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. concealed work, including cutting chases and making good the walls etc. (Ref.. to Spec. Nos.- 18.8) 32mm Nosminnal outer dia pipes.

Providing and fixing G.l. Pipes complete with (3.1. Fittings and clamps. i/c cutting and making good the walls etc. Internal work. Exosed on wall. (Ref.. to Spec. Nos.- 18.10) 15mm Nosminnal dia pipes.

Providing and fixing G.l. Pipes complete with (3.1. Fittings and clamps. i/c cutting and making good the walls etc. Internal work. Exosed on wall. (Ref.. to Spec. Nos.- 18.10) 20mm Nosminnal dia pipes.

Providing and fixing G.l. Pipes complete with (3.1. Fittings and clamps. i/c cutting and making good the walls etc. Internal work. Exosed on wall. (Ref.. to Spec. Nos.- 18.10) 25mm Nosminnal dia pipes.

Providing and fixing G.l. Pipes complete with (3.1. Fittings and clamps. i/c cutting and making good the walls etc. Internal work. Exosed on wall. (Ref.. to Spec. Nos.- 18.10) 32mm Nosminnal dia pipes.

Providing and fixing G.l. Pipes complete with (3.1. Fittings and clamps. i/c cutting and making good the walls etc. Internal work. Exosed on wall. (Ref.. to Spec. Nos.- 18.10) 40mm Nosminnal dia pipes.

Providing and fixing G.l. Pipes complete with (3.1. Fittings and clamps. i/c cutting and making good the walls etc. Internal work. Exosed on wall. (Ref.. to Spec. Nos.- 18.10) 50mm Nosminnal dia pipes.

Providing and fixing brass bib cock of approved quality. (Ref.. to Spec. Nos.- 18.15).15mm Nosminnal dia pipes.

Providing and fixing brass bib cock of approved quality. (Ref.. to Spec. Nos.- 18.15).20mm Nosminnal dia pipes.

providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. (Ref.. to Spec. Nos.- 18.18) 15mm Nosminnal dia pipes.

providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. (Ref.. to Spec. Nos.- 18.18) 20mm Nosminnal dia pipes.

providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. (Ref.. to Spec. Nos.- 18.18) 25mm Nosminnal bore.

Providing and fixing C.P. brass bib cock of a roved uali confoRmtin to IS:8931. 15 mm Nosminal bore. (Ref.. to Spec. Nos.- 18.49)

Providing and fixing C.P. Brass long Nose bib cock of approved quality confoRmting to IS standards and wei hin Nost less than 15 mm Nosminal bore. (Ref.. to Spec. Nos.- 18.50)

Providing and fixing C.P. Brass stop cock (concealed) of standard design and of approved make confoRmtin to 15mm Nosminal bore. (Ref.. to Spec. Nos.- 652)

Providing and fixing C.P. brass angle valve for basin mixer and geyser point of approved quality confoRmtin to 15mm Nosminal bore. (Ref.. to Spec. Nos.- 18.53)

Providing and fixing PTMT bib cock of approved qaulity and colour. (Ref.. to Spec. Nos.- 18.54) 15mm Nosminal bore 86mm long

Providing and fixing PTMT bib cock of approved qaulity and colour. (Ref.. to Spec. Nos.- 18.54) 15mm Nosminnal bore 122mm long

Providing and fixing PTMT bib cock of approved qaulity and colour. (Ref.. to Spec. Nos.- 18.54) 15mm Nosminnal bore 165mm long

Providing and fixing PTMT bib cock of approved qaulity and colour. (Ref.. to Spec. Nos.- 18.54) 15mm Nosminnal bore 90mm long

Providing and fixing water closet squatting pan (Indian type WC Pan) with 100mm sand cast Iron P or S trap. 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) confoRmting to IS :7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. (Ref.. to Spec. Nos.- 17.1)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x41 Ox265mm sizes respectively with automatic flushing cistern with standard flush pipe and CP brass spreaders with brass unions and Gl clamps complete inclucing painting of fittings and brackets, cutting and making good the wall and floors wherever rquired. one unrinal basin with 5 liter white pvc automatic. (Ref.. to Spec. Nos.- 17.4)

As Ref.. to Spec. Nos.17.4 above but range of four urinal basins with 10 liter white pvc automatic flushing cistern.

Providing and fixing white vilreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushig cistern, with fittings, standard size CP brass flush pipe, spreaders with unions and clamps (all in CP brass) with waste fitting as per IS:2556 Cl trap with outlet grating and other couplings in CP brass including painting of fittings and cutting and making good the walls and floors wherever required. (Ref.. to Spec. Nos.- 17.5) Sigle half stall urinal with 5 liter white pvc automatic flushing cisteRmt

Providing and fixing white vilreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushig cistern, with fittings, standard size CP brass flush pipe, spreaders with unions and clamps (all in CP brass) with waste fitting as per IS:2556 Cl trap with outlet grating and other couplings in CP brass including painting of fittings and cutting and making good the walls and floors wherever required. (Ref.. to Spec. Nos.- 17.5) Range of two half stall urinal with 5 liter white pvc automatic flushing cisteRmt

Providing and fixing white vilreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushig cistern, with fittings, standard size CP brass flush pipe, spreaders with unions and clamps (all in CP brass) with waste fitting as per IS:2556 Cl trap with outlet grating and other couplings in CP brass including painting of fittings and cutting and making good the walls and floors wherever required. (Ref.. to Spec. Nos.- 17.5) Range of three half stall urinal with 10 liter white pvc automatic flushing cisteRmt

Providing and fixing white vilreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushig cistern, with fittings, standard size CP brass flush pipe, spreaders with unions and clamps (all in CP brass) with waste fitting as per IS:2556 Cl trap with outlet grating and other couplings in CP brass including painting of fittings and cutting and making good the walls and floors wherever required. (Ref.. to Spec. Nos.- 17.5) Range of four half stall urinal with 10 liter white pvc automatic flushing cisteRmt

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white PVC automatic flushing cistern, with fittings standard size GI/PVC flush pipe for back and front flush with standard spreader pipes with fittings Gl clamps and CP brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. (Ref.. to Spec. Nos.- 17.6) Single squatting plate with 5 litre PVC automatic flushing cistern

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white PVC automatic flushing cistern, with fittings standard size GI/PVC flush pipe for back and front flush with standard spreader pipes with fittings Gl clamps and CP brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. (Ref.. to Spec. Nos.- 17.6) Range of two squatting plate with 5 litre PVC automatic flushing cistern

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white PVC automatic flushing cistern, with fittings standard size GI/PVC flush pipe for back and front flush with standard spreader pipes with fittings Gl clamps and CP brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. (Ref.. to Spec. Nos.- 17.6) Range of three squatting plate with 10 litre PVC automatic flushing cistern

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white PVC automatic flushing cistern, with fittings standard size GI/PVC flush pipe for back and front flush with standard spreader pipes with fittings Gl clamps and CP brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. (Ref.. to Spec. Nos.- 17.6) Range of four squatting plate with 10 litre PVC automatic flushing cistern

Providing and fixing wash basin with Cl brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever rquired White vitreous china wash basin. (Ref.. to Spec. Nos.- 17.7) Size 630x450mm with a pair of 15mm CP brass pillar taps

Providing and fixing wash basin with Cl brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever rquired White vitreous china wash basin. (Ref.. to Spec. Nos.- 17.7) Size 630x450mm with a single 15mm CP brass pillar taps.

Providing and fixing wash basin with Cl brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever rquired White vitreous china wash basin. (Ref.. to Spec. Nos.- 17.7) Size 550x400mm with a pair of 15mm CP brass pillar taps.

Providing and fixing wash basin with Cl brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever rquired White vitreous china wash basin. (Ref.. to Spec. Nos.- 17.7) ize 550x400mm with a single 15mm CP brass pillar taps.

Providing and fixing wash basin with Cl brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever rquired White vitreous china wash basin. (Ref.. to Spec. Nos.- 17.7) Size 600x480mm with single 15mm CP brass pillar taps

Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers com lete. (Ref.. to Spec. Nos.- 17.31)

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo India WC pan) with seat & lid fixed with CP brass hinges and rubber buffers, 10 liter low level PVC flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required of approved same as above but.(Ref.. to Spec. Nos.- 17.68)

White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vireous china flushig cistern and CP flush bend of approved make & quality. (Ref.. to Spec. Nos.- 17.68.1)

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/ 6 litre (adjustable of 4 litre/8 litre), including seat cover and cistern fittings nuts bolts and gasket etc complete f approved make & quality. (Ref.. to Spec. Nos.- 17.78)

Supply & fixing If flush doors commercial quality confoRmting to IS. 2202 Part-I (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges, bolts locks, handles, springs and other fittings but excluding their supply and including painting with two coasts of black japan paint on iron fitting if necessary. with necessary screw complete. Single Leaf 40 mm

Same as Ref.. to Spec. Nos 2.89 Double leaf extra on over all rate

Providing and laying rectified glazed ceremic floor tiles 300 x 300mm or more size (thickness to specified by approved make in colors) of first quality confiRmting to IS 15622 of approved make in colors & shade laid on 20mm thick cement mortar 1:4 (Icement 4 coarse sand) including grouting the joints with white cement and matching pigments for 1 Sqm.

Providing and Laying vitrified floor tiles of approve make and Brand in difference size (thickness specified by manufacturer) with water absorption less than 0.8% and confiRmting to IS 15622 of approved make in all colors and shade laid on 20mm thick cement mortar 1:4 (Icement 4 coarse sand) including grouting the joints with white cement and matching pigments etc complete size of tiles 600x600mm.

25mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete with base of cement mortar for 10 Sqm.

25mm thick Kota stone slab in riser of steps, skirting 1:3 (Icement 4 coarse sand) and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete for 10 Sqm.

okjk.klh uxj fuxe {ks= ds vUrxZr xaxk unh ds ?kkVksa ij ck<+ ds i'pkr~ tes flYV dks iEi }kjk gVkus dk dk;Z A ¼ iEi] tujsVj] laD'ku ikbZi] fMyhojh ikbi] uksty] iEi vkijsVj] fMty] fMyhojh ikbi idM+us gsrq eSu ikoj bR;kfn ½

okjk.klh uxj fuxe {ks= ds vUrxZr xaxk unh ds ?kkVksa ij ck<+ ds i'pkr~ teh flYV dks iEi }kjk gVkus dk dk;Z A ¼ iEi] tujsVj] laD'ku ikbZi] fMyhojh ikbi] uksty] iEi vkijsVj] fMty] fMyhojh ikbi idM+us gsrq eSu ikoj bR;kfn ½

CC work 1:2:4 cement, coarse sand & stone brick with all complete. Si Nos 279b

R.C.C. work in 1:1.5:3 cement, c/sand &20 mm gauge stone grit etc as per 5.1.Nos-2846 b

Providing and fixing concerting coil fencing with punched tape concertina coil 600mm dia 10 m openable length (total length 90m ) laying 50 Nos rounds per 6 m length up to 3m height of wall eith existing angle iron 'Y' shaped placed 2.4m or 3.0m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with GI staples and GIclip to retain horizontal , including neccessary bolts or GI barbed wire tied to anle iron all complete as per direction of engineer -in- charge, with reinforced barbed (R.B.T. ) spring core ( 2.5 mm thick) wire of high tensile strength of 165kg/Sqmm with tape (.o52mm thick ) and weigth 43.478 gm/meter ( cost of M.S. angle C.C. block shall be paid separately )

S/F of RCC precast boundry wall consisting of 150mm size column and 210x300x50 mm plank with M-25 grade concrete including supply of all material, labour and T&P etc. Required for proper completion of the work as directed by Engineer.

Supply and construction of 'Y' shape M.S. angle aRmt (as per design attached) L= 102mtr, D= 3mtr Total weight Y- shape angle aRmt =8kg Total Nos. of Y shape angle aRmt =38Nos

Suppy and fixing of 1mm thick MS steel and framing and both side diagonal angel frame SI Nos 5178

S/F of precast piller etc all complete. (0.1x0.1x1.8m)

S/F of G.1. Barbed wire with complete work.

S/F inaurgation sign board with all comp. (0.75x0.6m)

S/F retro-Ref..lactorised traffic sign as per IRC-67-2012 (Morth 801-8.4). 90cm equilateral triangle with plate size 20x60cm.

S/F retro-Ref..lactorised traffic sign as per IRC-67-2012 (Morth 801-8.4). 60cm equilateral triangle with plate size 20x60cm.

S/F retro-Ref..lactorised traffic sign as per IRC-67-2012 (Morth 801-8.4). 60cm circular with palte size 20x60cm.

S/F retro-Ref..lactorised traffic sign as per IRC-67-2012 (Morth 801-8.4). 80x60mm rectangular with palte size 20x60cm.

S/F retro-Ref..lactorised traffic sign as per IRC-67-2012 (Morth 801-8.4). 90cm high octagonal.

S/F retro-Ref..lactorised traffic sign as per IRC-67-2012 (Morth 801-8.4). 50x60cm single chebron

S/F retro-Ref..lactorised traffic sign as per IRC-67-2012 (Morth 801-8.4). 155x50cm double chebron

S/F retro-Ref..lactorised traffic sign as per IRC-67-2012 (Morth 801-8.4). 30x90cm left/right object hazard

S/F retro-Ref..lactorised traffic sign as per IRC-67-2012 (Morth 801-8.4). 45x90cm two way object hazard

S/F retro-Ref..lactorised traffic sign as per IRC-67-2012 (Morth 801-8.4). 30x90cm + 45x78cm guaded/unguarded railway crossing.

Retro-Ref..lactorised traffic signs (S.S. frame & post with one side signage) size 1.50x1.20m retroRef..lactive sheeting of HIP grade IRC 67 2012 (Morth : 801-8.6-base).

Retro-Ref..lactorised traffic signs (S.S. frame & post with both side signage) size 1.50x1.20m retroRef..lactive sheeting of HIP grade two main post 45x45x60cm. IRC 67 2012 (Morth : 801-8.6-base).

S/F of 4mm. ACP sheet etc all complete. (DSR Nos.-26.31) (1134x0.735=833.49)

P/F of stainless steel grage-304 railing made of hollow tubes channel plate etc all complete work. (Ref. LKO SR No.-10.28)

S/F of prelaminated decorative laminatioNosne side & other side balancing lamination grade-1 etc all complete. (DSR Nos.-26.31) (1134x0.735=833.49)

P/F of false ceiling all height incl. provding & fixing of frame work etc all complete. (Ref. LKO SR No.- 12.45.4)

P/F of factory made exlruded WPC work etc all complete. (Ref. LKO SR No.- 26.90) 6mm. Thick

P/F of factory made exlruded WPC work etc all complete. (Ref. LKO SR No.- 26.90) 12mm. Thick

Supply of cement.43grade

Supply of local river sand.

Supply of fine sand.

Supply of brick ballast 40mm. Guage.

Supply of brick ballast 25mm. Guage.

Supply of M-150.

Supply of M-100.

Supply/ Laying/ Jointing of 600mm dia. RCC NP-3 pipe etc all complete work. (Ref.. to Spec. Nos.- 26)

Supply/ Laying/ Jointing of 450mm dia.RCC NP-3 pipe etc all complete work. (Ref.. to Spec. Nos.- 26)

Supply/ Laying/ Jointing of 350mm dia.RCC NP-3 pipe etc all complete work. (Ref.. to Spec. Nos.- 26)

Cleaning of Grass and Removal in ordinary soiletc all complete. (Ref.. to Spec. Nos.- 2.1)

Supply of stone patiya dressed etc all complete.

Supply of mason grade-1 etc all complete. (Ref.. to Spec. Nos.- 2)

Supply of mason grade-1 etc all complete. (Ref.. to Spec. Nos.- 3)

Supply of carpenter grade-1 etc all complete. (Ref.. to Spec. Nos.- 7)

Supply of plumber/electrician grade-1 etc all complete. (Ref.. to Spec. Nos.- 14)

Supply of plumber/electrician grade-2 etc all complete. (Ref.. to Spec. Nos.- 15)

Supply labour/Beldar skilled etc all complete. (Ref.. to Spec. Nos.- 17)

Supply labour/Beldar unskilled etc all complete. (Ref.. to Spec. Nos.- 18)

Supply pump operater etc all complete. (Ref.. to Spec. Nos.- 31)

Providing Generator operator. (Ref.. to Spec. Nos.- 29)

Providing of Boat with Boat Man etc all complete work.

Supply and fixing of poly vinay sheet paper with specefic desing etc all complete work.

Kushagra Enterprises (BID ID -5213549)

M/s AJA CONSTRUCTION (BID ID -5213547)

M/S Siddharth Construction (BID ID -5213543)

M/S SAURABH ENTERPRIESES (BID ID -5201662)

M/S MAA GANGA CONSTRUCTIONS (BID ID -5209562)

AJEET YADAV (BID ID -5209622)

MS SHRI SAI ASSOCIATES (BID ID -5211439)

LSR Enterprises (BID ID -5215611)

Ajay Kumar Singh (BID ID -5214431)

M/S AKHILESH KUMAR MISHRA (BID ID -5213820)

Ms Anil Kumar And Brothers (BID ID -5211457)

TYAGI CONSTRUCTION AND ORDER SUPPLIERS (BID ID -5196129)

VIRA ENTERPRISES (BID ID -5215347)

DILEEP KUMAR ENTERPRISES (BID ID -5203637)

LALCHAND RAM (BID ID -5208661)

SRIJAN PROJECTS (BID ID -5215194)

M/S SUSHAMA CONSTRUCTION (BID ID -5212003)

M/S KUMAR ENTERPRISES (BID ID -5208065)

M/S SHAILSUTA ENGINEERING WORKS (BID ID -5208627)

M/S S K CONSTRUCTION (BID ID -5208655)

M/S DEO ENGINEERING WORKS (BID ID -5208684)

Deep & Company (BID ID -5208726)

M/S V.P. Construction (BID ID -5208741)

SHASHI CONSTRUCTION (BID ID -5208845)

OM SAI CONSTRUCTION (BID ID -5209932)

M/S SHREE BALAJI TRADERS (BID ID -5209964)

M/S KAMLESH KUMAR SINGH (BID ID -5210019)

M/S SUKRITI SHRIVASTAVA (BID ID -5210026)

M/S OM SAI CONSTRUCTION (BID ID -5210192)

MS MISHRA CONSTRUCTION COMPANY (BID ID -5210299)

Ramsewak Singh (BID ID -5210352)

M/S KAKAN CONSTRUCTION COMPANY (BID ID -5210370)

MAA DURGA CONSTRUCTION (BID ID -5189338)

NARAYAN CONSTRUCTION (BID ID -5210584)

M/S SURESH KUMAR TIWARI CONTRACTOR (BID ID -5210710)

sanjay kumar singh (BID ID -5210761)

M/S R.K CONSTRUCTION (BID ID -5210776)

AWADH CONSTRUCTION (BID ID -5210822)

L.S. AND SONS (BID ID -5210885)

MS ANIL KUMAR SINGH (BID ID -5211123)

M/S MAHAVEER ENTERPRISES (BID ID -5211134)

M/S URMILA ASSOCIATES (BID ID -5211156)

M/S AJEET CONSTRUCTION (BID ID -5211164)

SURYABHOOMI CONSTRUCTION (BID ID -5212126)

MS JAI TRADERS (BID ID -5212267)

VAISHANAVI CONSTRUCTION (BID ID -5212272)

M/S BHAGWAT SINGH (BID ID -5212386)

SAJID IQBAL HAIR AND BEAUTY (BID ID -5212451)

M/S MANISH KUMAR CHAINANI (BID ID -5215847)

SWATI CONSTRUCTION (BID ID -5215755)

PURVANCHAL CONSTRUCTION (BID ID -5213474)

RUDRA ENTERPRISES (BID ID -5215542)

KRISHAK INFRASTRUCTURES (BID ID -5191089)

M/S SANSKAR ENTERPRISES (BID ID -5195900)

VIRAJ ENTERPRISES (BID ID -5196207)

B.L.D CONSTRUCTION AND SUPPLIER (BID ID -5196246)

M/S SONALI ENTERPRISES (BID ID -5200209)

M/S RAI ENTERPRISES (BID ID -5200631)

M/S VARUNA CONSTRUCTION (BID ID -5201097)

GAZANAFAR ZAMIL (BID ID -5206023)

M/S PITAAH SHRI ENTERPRISES (BID ID -5206200)

KASHI VISHWANATH INDUSTRIES (BID ID -5206260)

Bajrang Organization (BID ID -5206581)

Bajrang Iron Hardware Marble Company (BID ID -5206599)

M/S S AND S CONSTRUCTION (BID ID -5207545)

SHYAM JI SHARMA (BID ID -5207784)

Anand Bihari Enterprises (BID ID -5207940)

RAJ CONSTRUCTION (BID ID -5207981)

M/S SHIV DHANI RAM (BID ID -5208099)

M/S KRISHNA INFRASTRUCTURE (BID ID -5208446)

KRISHNA ENTERPRISES (BID ID -5214866)

M/S J.K AND Co. (BID ID -5214879)

KHUSHI ENTERPRISES (BID ID -5214888)

Nitin Kumar Singh (BID ID -5215608)

M/S SAMARTH ENTERPRISES (BID ID -5215383)

M/S ADITYA CONSTRUCTION (BID ID -5215409)

SAURABH CONSTRUCTION (BID ID -5215479)

DHAM ENTERPRISES (BID ID -5215500)

Saurabh Brothers Construction (BID ID -5215508)

VISHESHWAR ASSOCIATES (BID ID -5215747)

SURYA CONSTRUCTION (BID ID -5214273)

ARYA CONSTRUCTION (BID ID -5214321)

M/S K.M. CHAINANI (BID ID -5215645)

M/s Prem Gita Associates (BID ID -5214548)

M/s Sai Construction (BID ID -5214834)

M/S BABA KINARAM CONSTRUCTION CO. (BID ID -5215591)

M/s Manoj Kumar Singh (BID ID -5215767)

M/S SIDDHARTH CONSTRUCTION (BID ID -5216208)

M/S BANARASI LAL AND COMPANY (BID ID -5213048)

Shree Ram Developers (BID ID -5216219)

M/S SATWIK ENTERPRISES (BID ID -5214842)

M/s Akhilesh Associate (BID ID -5213207)

M/s Nirbhay Enterprises (BID ID -5213318)

M/S SIDHHI ENTERPRISES (BID ID -5214510)

KUSH ENTERPRISES (BID ID -5210531)

G.G Associates (BID ID -5213263)

M/S R.S.T. ENTERPRISES (BID ID -5214450)

M/S SRI GANPATE ENTERPRISES (BID ID -5211089)

SKY SHASHI CONSTRUCTION (BID ID -5211362)

M/S MAHAVEER ENTERPRISES (BID ID -5213375)

Gopal Ji (BID ID -5212599)

Radha & Sons (BID ID -5215613)

YUVRAJ CONSTRUCTION (BID ID -5213863)

M/S DEENA NATH GUPTA AND COMPANY (BID ID -5214828)

M/S R K ENTERPRIUSES (BID ID -5214911)

M/S AMBAY ENTERPRISES (BID ID -5216279)