Special repair works for the existing Fire and Rescue Service Station building at WATRAP in Virudhunagar District

DI0027) Dismantling the damaged Pressed tiles laid over cement mortar and Weathering Course

DI0012) Clean Removel of Cement plaster from walls without affecting the adjacent structures

DI0016) Dismantling the damaged top of floor Plastering in cement mortar

DI0051) Dismantling the existing damaged flooring tiles & Glazed wall tiles

DI0021) Dismantling the damaged brick works of cement mortar

DI0018) Dismantling the damaged Plain cement concrete flooring

C0027) Plain cement concrete 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly)

B0012) Brick Work in Cement Mortor 1:5 (one of cement and five of crushed stone sand) with admixture using kiln burnt country bricks of size 8¾”x4¼"x2¾” (22x11x7cm)

B0053) Brick Partition wall in Cement Mortor 1:4 (one of cement and four of crushed stone sand) with admixture 110mm thick for super structure in the following floors using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) b) In Ground Floor

B0025) Brick Work in Cement Mortor 1:6 (one of cement and six of crushed stone sand) with admixture using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) a) In Ground Floor

C0038) Providing and laying in position, Standardised Concrete Mix M-20 Grade in a accordance with IS:456-2000 using 20mm a) In Foundation and Basement

FW0004) Providing Form work and centering for reinforced cement concrete a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

C0029) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) with admixture using 20mm gauge hard broken stone jelly

F0001) Supplying and filling in foundation and basement with filling Crushed Stone sand

F0012) Supplying and filling in foundation and basement with Well Gravel in layers of 150mm thickness

PL0012) Plastering in cm 1:3 (one of cement and three of crushed stone sand) with admixture 12mm tk

FL0049) Supplying and fixing of colour glazed tiles of best approved quality (the colour and shade shall be got approved from the executive engineer before using) over cement plastering in cm 1:2 (one of cement and two of crushed stone sand) with admixture 10mm thick

FL0110) Supplying and laying of ceramic tiles (anti skid) of best approved quality for flooring and other similar works (the colour and shade shall be got approved from the executive engineer before using) over cement mortor 1:3 (one of cement and three of crushed stone sand) with admixture

FL0118) Supplying and fixing of stain free nano polish vitrified tiles of best approved quality 600x600x8mm

CS0038) Supplying and fixing of Precast cement concrete slab for cupboard/ward robes shelve I. 40mm thick a. In Foundation and Basement

RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

PL0003) Plastering with cm 1:5 (one of cement and five of crushed stone sand) with admixture 12mm thick

PL0013) Special ceiling plastering in cement mortar 1:3 (one of cement and three of crushed stone sand) with admixture 10mm thick

PL0006) Plastering with cm 1:4 (one of cement and four of crushed stone sand) with admixture 12mm thick

FL0109) Plastering the top of flooring in cm 1:4 (one of cement and four of crushed stone sand) with admixture 20mm thick

C0030) Plain cement concrete 1:8:16 (one of cement, eight of crushed stone sand and sixteen of broken brick jelly)

FL0047) Finishing top of roof with one course of Hydraulic pressed tiles of approved superior quality of size 23cmx 23cmx20mm thick

PA0002) White washing two coats old wall using clean shell lime slaked

PA0037) Painting the New walls with two coats of approved best ready mixed Interior emulsion paint

PA0037.a) Painting the New walls with two coats of approved best ready mixed Exterior emulsion paint

PA0001) White washing three coats using clean shell lime slaked

FL0024) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring

MS0053) Supplying and fixing of C.I man hole cover (Heavy Duty) of approved quality and brand of size 60cm x 60cm (50Kg)

JD0073) Providing and fixing factory made unplasticized polyvinyl chloride (UPVC) Door Frame of size 50X47mm

J0017) Supplying and fixing of 4mm thick pin headed Glass panels with aluminium anodised ‘U’ shape beeding

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

C0013) Providing Rain water harvesting pit by augering 300mm dia bore pits to a depth of 5.50m overall depth and filling with stone jelly a) Providing Pit

SA0033) Supplying and fixing the following dia PVC (SWR) pipe with ISI mark conforming to IS 13952:1992- type `B` a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

WS0003) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0036) Supplying and fixing of half turn C.P short body Tap of 15mm dia

DI0045) Dismantling the Brick jelly concrete, existing floor finishing etc., without affecting the structure and removing the existing IWC

SA0025) Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade `P` or `S` trap

SA0019) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm X 440 mm of approved make with ISI mark

EL0174) Supplying and laying of 8 SWG GI Wire for earth connection on wall / below ground levels with necessary ‘U’ Nails

EL0214) EARTHING AND EARTH CONNECTIONS: Providing Earthing station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0 m of 20mm B-class GI pipe

EL0004) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable (Open wiring) a) Light point with ceiling rose

b) Light point without ceiling rose

EL0012) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with Fan Point (Open wiring)

EL0036) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable 5 amps 5 pin plug socket point at convenient places (open wiring)

EL0028) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable 5 amps. 5 pin plug socket point at Switch Board Itself (open wiring)

EL0047) Supplying and fixing of 4'18 watts crystal LED tube light

EL0100) supplying and fixing of 25 WATTS Bulb lamp with street light fittings

EL0186) Run of main with 2 wires of 1.5sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable existing concealed rigid PVC conduit pipe

WS0023) Supplying, Laying and fixing of following dia UPVC pipes of best approved quality a) 32mm dia UPVC Pipe

b) 25mm dia UPVC pipe

c) 20mm dia UPVC pipe

SA0002) Supplying and fixing of Porcelin wash hand basin (white without pedastal)

PA0006) White washing one coat for old plastered surface using clean shell lime

PA0036) Painting the old iron work with one coat and other similar works such as pvc / astm pipes

PA0035) Painting the old wood work with one coat of approved first class

PA0041.a) Painting the old walls with two coats of approved best ready mixed Plastic Emulsion paint for inner walls without primer including thorough scrapping etc

PA0041) Painting the old walls with two coats of approved best ready mixed Plastic Emulsion paint for outer walls without primer including thorough scrapping etc

EL0078) Supply and delivery of following Electric Ceiling fan a) 48" Electric fan 1200mm sweep

EL0075) Charges for assembling and fixing of ceiling fan

Please Enable Macros to View BoQ information