Loading
Loading…
Loading…
Tender Value
₹40.4 L
EMD Value
₹80,800
Closing Date
11 Sept 2026, 6:00 pm
GE TENGA
GE TENGA PIN-790116 C/O 99 APO
SPL REPAIR OF BLDG NO TW/42, COOK HOUSE (BLDG NO CH-19) AND BLDG NO TE/368 (JCO MESS) AT MTN ARTY BDE CAMP SIG COY OF AGE B/R AND AGE E/M UNDER GE TENGA
2026_MES_785687_1
8253/E8
Open Tender
Civil Works
Item Rate
180 days
GE TENGA
PLS REF NIT
7 documents required · 7 mandatory
₹500
Yes
GE TENGA
₹80,800
Yes
21 Aug 2026
21 Aug 2026
18 Sept 2026
21 Aug 2026
11 Sept 2026
4 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed. | 626 | Sqm | - | - |
| 2 | Supply and Fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed (Note:- Item rate shall be include any height of Bldgs / Hangars for scaffolding as all arrangement.) | 398 | Sqm | - | - |
| 3 | Supply and Fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed (Note:- Item rate shall be include any height of Bldgs / Hangars for scaffolding as all arrangement.) | 18.64 | Sqm | - | - |
| 4 | Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed. | 99 | Sqm | - | - |
| 5 | S & F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete, all as specified and directed. | 66 | Sqm | - | - |
| 6 | S & F 0.80 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. | 20 | Sqm | - | - |
| 7 | M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces. | 39.81 | Sqm | - | - |
| 8 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. | 20 | Sqm | - | - |
| 9 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint all as specified and directed. | 10 | Sqm | - | - |
| 10 | Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level) | 31.75 | Cum | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.06 MB
BOQ_880431.xls
BOQ • 0.43 MB
Tender.pdf
Tender Documents • 9.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].