REPAIR, MAINT OF ROAD IN POCKETS OF STATIC WKSP EME, GATE NO 02 AND 01 OF AWC AND OTHER EXTERNAL ROAD

Amount

Scarifying or picking graveled macadam or bituminous macadam surfaces in area n.exc 400 sqm complete all as specified and directed

Material and labour for 75 mm thick (compacted thickness) in , WBM, with granite trap or basalt coarse aggregate of grading 2 (63 to 40 mm size) or grading 3 (50 to 20 mm size) spread, levelled, rolled and consolidated to required gradient and camber complete by using mechanical power road roller of 08 to 12 tonne capicity complete all as specified and directed.

Material and labour for repair to pot holes any depth, not exc 1 sq.m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, but making good by appling tack coat at 5 Kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chipperings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). Depth of potholes exc 30 mm complete all as specified and directed

Material and labour for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber up to outer edges of roads on existing black top surfaces complete all as specified and directed. NOTE: - (i) Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only.

Preparing the unsurfaces WBM of roads by brushing with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clear the surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with paving bituminous primer VG- 30 at the rate of 10 kg per 10 sqm and applying Material and labour for premixed hot mix Asphaltic Semi Dence Concrete using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 30 mm (consolidated Thickness) including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber all as specified and directed. Note: - Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (Note :- Mix shall be obtained from hot mix plant and spreading shell be done by using mechanical paver only).

Preparing the black top surfaces of roads by brushing with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clear the surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with paving bituminous primer VG- 30 at the rate of 5 kg per 10 sqm and applying Material and labour for premixed hot mix Asphaltic Semi Dence Concrete using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 30 mm (consolidated Thickness) including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber all as specified and directed. Note: - Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (Note :- Mix shall be obtained from hot mix plant and spreading shell be done by using mechanical paver only).

Material and labour for marking lines, dashes, arrows, letters etc. exceeding 10 cm wide on bituminous/concrete pavemnt/path surface with retro reflective thermoplastic road marking paint with reflector sing glass beads @ 250 gms per sqm area confirming to MOST & BIS specification, not less then 2mm thick of white/golden/yellow as approved colour/shade and applied with machine, as per manufacturer's instructions including preparation of surface complete all as specified and directed. (Make- Shalimark of STP Ltd or M/S Kataline Infra Products Pvt Ltd or equivalent as approved by GE) Note:- The rate included for provision of red signals to keep off traffic from wet paint, cleaning road surfaces and working during odd hours when traffic is light.

Material and labour for 100mm thick moorum/red bajri filling as in berms of road laid in layers spread levelled including watering and rooled with hand/power roller to required grade complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for 75mm thick PCC (1:4:8), type D-2, using 40mm graded stone aggregateas in sub base, foundation mass concrete and filling complete all as specified and directed.

Material and labour for preparation on newly brick or concrete surface of any description over 10cm width or grith not otherwise described and applying two coats synthetic enamel paint with complete all as specified and directed.

Material and labour for 80 mm thick machine prestressed precast interlocking paver block (glossy finished) with grey cement with pigment confirming to IS 15658-2006 of M-40 grade , laid dry & joints filled with fine sand & size, shape colour and pattern as approved by GE, laid over and including 30 mm thick stone dust / sand cushioning filling ,with complete all as specified & directed.

Material and labour for providing precast cement concrete kerb blocks(machine pressed) ,solid,cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) finished at top bullnosed shape and finished surface even and smooth and jointed in cement mortar 1:4 stuck finished including necessary earth work complete all as specified and directed.

Demolition of brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for brick work with fly ash bricks using modular size bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour for 15 mm thick rendering on brick work or concrete surface in two layer, first layer 10 mm thick in cement mortar 1:4 and second layer 5 mm thick in cement mortar 1:4, both layers mixed with water proofing compound, surface finished even and fair witout using extra cement. Note- WPC shall be measured and paid separately.

Material and labour for applying three coats of white wash including preparation of surfaces complete all as specified and directed.

Material and labour for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in coping, cills, steps and other similar work etc complete all as specified and directed.

S&F in repairs 800m to 1000mm dia convex mirror for visibility and fixed with 50mm dia SS pipe medium grade ISI mark (height of pipe not less then 1.20 m from ground level) & embeded in post holes, (size 200mm x 200 mm x 400mm) in PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) & including earth work & excavation, RFR etc. complete all as specified and directed.

S&F in repairs of retro reflective writing letters of any size and shape on sign board made out reflective / glittiring film (computer printing of real size of the board) including necessary scalfolding wherever required as directed by Engineer-in-Charge.

Supply and fixing in repairs retro reflective sign board made out of ACP sheet 5 to 6mm thick and pesting the high intensity prismatic tapes on back ground in required colour both side writing including stainless steel framing with size 600mm X 900mm with two pole pesting and nomenclature of insignia fixed with 50mm dia SS pipe medium grade ISI mark (height of pipe not less then 1.20 m from ground level) & embeded in post holes, (size 200mm x 200 mm x 400mm) in PCC 1:3:6, type C-2 (using 20 mm graded crushed stone aggregate) & including earth work & excavation, RFR etc as directed by Engineer-in-Charge.

Supply and fixing in repairs retro reflective sign board made out of ACP sheet 5 to 6mm thick and pesting the high intensity prismatic tapes on back ground in required colour both side writing including stainless steel framing with standard size of triangle and circular with single pole pesting and nomenclature of insignia fixed with 50mm dia SS pipe medium grade ISI mark (height of pipe not less then 1.20 m from ground level) & embeded in post holes, (size 200mm x 200 mm x 400mm) in PCC 1:3:6, type C-2 (using 20 mm graded crushed stone aggregate) & including earth work & excavation, RFR etc as directed by Engineer-in-Charge.

Supply and fixing in repairs coloured radium reflective sticker strip tape having width exceeding 50mm but n.exc 100mm of all as specified and as directed. (Make - Sun Eyes/Birla3M/Dark Eye/Oscar road safety/Stimsonite)

M/s ESS KAY Construction

M/S BABULAL SURAJMAL

M/s M S Sharma and Co.