Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC H NO 18 BY LANE NO 09 SATGAON PRAGATI NAGAR GUWAHATI ASSAM 781171 | KAMRUP METRO | ASSAM | 781171 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹16.3 L+₹50,583 (3.20%)Rejected-Finance GOSWAMI COLONY PO UDAYAN VIHAR DISTT KAMRUP ASSAM 781171 | KAMRUP METRO | ASSAM | 781171 | L2 | Rejected-Finance Not Admitted (Other than lowest bidder) |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
6 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GUWAHATI
GE GUWAHATI, PO SATGAON, DISTT KAMRUP - 781027
REPAIR/MAINT TO WATER SUPPLY INSTALLATION INCLUDING CLEANING OF OH/UG RESERVOIR AT BASISTHA AREA UNDER GE GUWAHATI
2023_MES_577804_1
GE/GUW/43/8256 OF 2022-23
Open Tender
Civil Works
Item Rate
150 days
GUWAHATI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE GUWAHATI
₹30,000
Yes
31 Mar 2023
28 Jan 2023
9 Mar 2023
28 Jan 2023
6 Mar 2023
16 Feb 2023
28 Jan 2023 - 4 Feb 2023
Amount
Taking down defective burnt out electric driven centrifugal pump/motor (Make- Kirlosker) of capacity 125 working on 3 phase, 440 volts 50 Hz, duly disconnecting electric and mechanical connection from pump and transport to civil workshop, dismantling and opening the motor into parts and taking out burnt out starter winding, cleaning, servicing slots etc. drying all parts and sort out defective spares, rewinding the starter winding with suitable size of super enameled copper wire as per existing gauge including replacement of insulating materials, varnishing, heating up starter winding in heating chamber to achieve insulation resistance at least 6 Ohms and reassembling after replacement of defective parts/spares including testing at workshop, transporting to site and reinstalled, mounting to its original position including coupling with respective pump and reconnect all disconnected connections, disconnected cable connections and mechanical support etc. including painting to motor with one coat of synthetic enamel paint as per existing colour, writing SM/MES No.(size of letters as ordered) after and including preparation of old painted surfaces including testing and commissioning complete all as required and as directed. Note:- New spare as required shall be measured and paid separately as 'supply only' under following items:
Supply only Impeller first Stage, Cat Part No.157 complete all as required and as directed.
Supply only Impeller Second Stage, Cat Part No.158 complete all as required and as directed.
Supply only S S Shaft, Cat Part No.180 complete all as required and as directed.
Supply only Ball Bearing DE, Cat Part No. 260 complete all as required and as directed.
Supply only Ball Bearing NDE ,Cat Part No. 263 complete all as required and as directed.
Supply only Key for Impeller & Shaft, Cat Part No. 320 complete all as required and as directed.
Supply only Key for Coupling, Cat Part No. 321 complete all as required and as directed.
Supply only Fine threaded MS Nuts & Bolts of size 5" Long & 3/4" dia complete all as required and as directed.
Supply only Gasket Set for 125 HP Pump Set complete all as required and as directed.
Taking down defective burnt out electric driven centrifugal pump/motor (Make- Kirlosker) of capacity 40 HP working on 3 phase, 440 volts 50 Hz, duly disconnecting electric and mechanical connection from pump and transport to civil workshop, dismantling and opening the motor into parts and taking out burnt out starter winding, cleaning, servicing slots etc. drying all parts and sort out defective spares, rewinding the starter winding with suitable size of super enameled copper wire as per existing gauge including replacement of insulating materials, varnishing, heating up starter winding in heating chamber to achieve insulation resistance at least 6 Ohms and reassembling after replacement of defective parts/spares including testing at workshop, transporting to site and reinstalled, mounting to its original position including coupling with respective pump and reconnect all disconnected connections, disconnected cable connections and mechanical support etc. including painting to motor with one coat of synthetic enamel paint as per existing colour, writing SM/MES No.(size of letters as ordered) after and including preparation of old painted surfaces including testing and commissioning complete all as required and as directed. Note:- New spare as required shall be measured and paid separately as 'supply only' under following items:
Supply only Bearing DE complete all as required and as directed.
Supply only Bearing NDE complete all as required and as directed.
Supply only PVC Cooling fan suitable for motor complete all as required and as directed.
Supply only CI Impeller suitable for Pump Set complete all as required and as directed.
Supply only Pump Shaft complete all as required and as directed.
Supply only Shaft sleeve Nut complete all as required and as directed.
Supply only Split Gland complete all as required and as directed.
Supply only CI Gland flange complete all as required and as directed.
Supply only Shaft coupling bolts with rubber bush complete all as required and as directed.
Supply only Set of Key complete all as required and as directed.
Taking down defective burnt out electric driven centrifugal pump/motor (Make- Kirlosker) of capacity 25 to 30 HP working on 3 phase, 440 volts 50 Hz, duly disconnecting electric and mechanical connection from pump and transport to civil workshop, dismantling and opening the motor into parts and taking out burnt out starter winding, cleaning, servicing slots etc. drying all parts and sort out defective spares, rewinding the starter winding with suitable size of super enameled copper wire as per existing gauge including replacement of insulating materials, varnishing, heating up starter winding in heating chamber to achieve insulation resistance at least 6 Ohms and reassembling after replacement of defective parts/spares including testing at workshop, transporting to site and reinstalled, mounting to its original position including coupling with respective pump and reconnect all disconnected connections, disconnected cable connections and mechanical support etc. including painting to motor with one coat of synthetic enamel paint as per existing colour,writing SM/MES No.(size of letters as ordered) after and including preparation of old painted surfaces including testing and commissioning complete all as required and as directed. Note:- New spare as required shall be measured and paid separately as 'supply only' under following items:
Supply only Pump Shaft complete all as required and as directed.
Supply only DE bearing suitable for 25 to 30 HP pump set complete all as required and as directed
Supply only NDE bearing suitable for 25 to 30 HP pump set complete all as required and as directed
Supply only Shaft sleeve Nut complete all as required and as directed.
Supply only Split Gland complete all as required and as directed.
Supply only CI Gland flange complete all as required and as directed.
Supply only Shaft coupling bolts with rubber bush complete all as required and as directed.
Supply only Set of Key complete all as required and as directed.
Taking down defective burnt out electric driven centrifugal pump/motor (Make- Kirlosker) of capacity 5 to 10 HP working on 3 phase, 440 volts 50 Hz, duly disconnecting electric and mechanical connection from pump and transport to civil workshop, dismantling and opening the motor into parts and taking out burnt out starter winding, cleaning, servicing slots etc. drying all parts and sort out defective spares, rewinding the starter winding with suitable size of super enameled copper wire as per existing gauge including replacement of insulating materials, varnishing, heating up starter winding in heating chamber to achieve insulation resistance at least 6 Ohms and reassembling after replacement of defective parts/spares including testing at workshop, transporting to site and reinstalled, mounting to its original position including coupling with respective pump and reconnect all disconnected connections, disconnected cable connections and mechanical support etc. including painting to motor with one coat of synthetic enamel paint as per existing colour, writing SM/MES No.(size of letters as ordered) after and including preparation of old painted surfaces including testing and commissioning complete all as required and as directed. Note:- New spare as required shall be measured and paid separately as 'supply only' under following items:
Supply only Bearing DE complete all as required and as directed.
Supply only Bearing NDE complete all as required and as directed.
Supply only PVC Cooling Fan suitable for pump set 10 HP motor complete all as required and as directed.
Supply only Casing wear ring complete all as required and as directed.
Supply only Bearing Cover complete all as required and as directed.
Supply only Pump Shaft complete all as required and as directed.
Supply only Set of Key complete all as required and as directed.
S&F in repair, Fully Automatic Star-delta starter, 35 HP, complete all as specified and directed.
S&F in repair, Fully Automatic Star-delta starter, 25 HP, complete all as specified and directed.
S&F in repair, Fully Automatic Star-delta starter, 10 HP, complete all as specified and directed.
S&F in repair, DOL starter, 7.5 HP, complete all as specified and directed.
S&F in repair, Relay suitable for 40HP FASD Starter of current range 85 Amps 3 Pole, complete all as specified and directed.
S&F in repair, Relay suitable for 30HP FASD Starter of current range 65 Amps 3 Pole, complete all as specified and directed.
S&F in repair, Relay suitable for 10HP FASD Starter of current range 22 Amps 3 Pole, complete all as specified and directed.
S&F in repair, Relay suitable for 7.5HP FASD Starter of current range 16 Amps 3 Pole, complete all as specified and directed.
S&F in repair, HGS Contactor with AC Coil suitable for 50 HP FASD Starter of current range 65 Amps 3 Pole, complete all as specified and directed.
S&F in repair, HGS Contactor with AC Coil suitable for 30 HP FASD Starter of current range 40 Amps 3 Pole, complete all as specified and directed.
S&F in repair, HGS Contactor with AC Coil suitable for 12.5 HP FASD Starter of current range 18 Amps 3 Pole, complete all as specified and directed.
S&F in repair, HGS Contactor with AC Coil suitable for 7.5 HP FASD Starter of current range 12 Amps 3 Pole, complete all as specified and directed.
S&F in repair, MCCB, 100 Amps, 25 KA, 415 Volts, 4 Pole with adjustable thermal & adjustable magnetic setting complete as specified and as directed.
Taking out defective burnt out electric driven centrifugal motor of capacity 125 HP working on 3 phase, 440 volts 50Hz duly disconnecting electric and mechanical connection from pump and transport to civil workshop, dismantling and opening the motor into parts and taking out burnt out starter winding, cleaning, servicing slots etc. drying all parts and sort out defective spares, rewinding the starter winding with suitable size of super enameled copper wire as per existing gauge including replacement of insulating materials, varnishing, heating up starter winding in heating chamber to achieve insulation resistance at least 6 Ohms and reassembling after replacement of defective parts/spares including testing at workshop, transporting to site and reinstalled, mounting to its original position including coupling with respective pump and reconnect all disconnected connections, disconnected cable connections and mechanical support etc. including painting to motor with one coat of synthetic enamel paint as per existing colour, writing SM/MES No.(size of letters as ordered) after preparation of old painted surfaces including testing and commissioning complete all as required and as directed.
Taking out defective burnt out electric driven centrifugal motor of capacity 40 HP working on 3 phase, 440 volts 50Hz duly disconnecting electric and mechanical connection from pump and transport to civil workshop, dismantling and opening the motor into parts and taking out burnt out starter winding, cleaning, servicing slots etc. drying all parts and sort out defective spares, rewinding the starter winding with suitable size of super enameled copper wire as per existing gauge including replacement of insulating materials, varnishing, heating up starter winding in heating chamber to achieve insulation resistance at least 6 Ohms and reassembling after replacement of defective parts/spares including testing at workshop, transporting to site and reinstalled, mounting to its original position including coupling with respective pump and reconnect all disconnected connections, disconnected cable connections and mechanical support etc. including painting to motor with one coat of synthetic enamel paint as per existing colour, writing SM/MES No.(size of letters as ordered) after preparation of old painted surfaces including testing and commissioning complete all as required and as directed.
Taking out defective burnt out electric driven centrifugal motor of capacity 25-30HP working on 3 phase, 440 volts 50Hz duly disconnecting electric and mechanical connection from pump and transport to civil workshop, dismantling and opening the motor into parts and taking out burnt out starter winding, cleaning, servicing slots etc. drying all parts and sort out defective spares, rewinding the starter winding with suitable size of super enameled copper wire as per existing gauge including replacement of insulating materials, varnishing, heating up starter winding in heating chamber to achieve insulation resistance at least 6 Ohms and reassembling after replacement of defective parts/spares including testing at workshop, transporting to site and reinstalled, mounting to its original position including coupling with respective pump and reconnect all disconnected connections, disconnected cable connections and mechanical support etc. including painting to motor with one coat of synthetic enamel paint as per existing colour, writing SM/MES No.(size of letters as ordered) after preparation of old painted surfaces including testing and commissioning complete all as required and as directed.
Taking out defective burnt out electric driven centrifugal motor of capacity 10-7.5HP working on 3 phase, 440 volts 50Hz duly disconnecting electric and mechanical connection from pump and transport to civil workshop, dismantling and opening the motor into parts and taking out burnt out starter winding, cleaning, servicing slots etc. drying all parts and sort out defective spares, rewinding the starter winding with suitable size of super enameled copper wire as per existing gauge including replacement of insulating materials, varnishing, heating up starter winding in heating chamber to achieve insulation resistance at least 6 Ohms and reassembling after replacement of defective parts/spares including testing at workshop, transporting to site and reinstalled, mounting to its original position including coupling with respective pump and reconnect all disconnected connections, disconnected cable connections and mechanical support etc. including painting to motor with one coat of synthetic enamel paint as per existing colour, writing SM/MES No.(size of letters as ordered) after preparation of old painted surfaces including testing and commissioning complete all as required and as directed.
M&L painting to centrifugal pump/motor of capacity 125HP capacity with one coat of synthetic enamel paint as per existing colour, writing SM/MES No.(size of letters as ordered) after preparation of old painted surfaces complete all as specified and as directed
M&L painting to centrifugal pump/motor of capacity 40HP capacity with one coat of synthetic enamel paint as per existing colour, writing SM/MES No.(size of letters as ordered) after preparation of old painted surfaces complete all as specified and as directed
M&L painting to centrifugal pump/motor of capacity 30HP capacity with one coat of synthetic enamel paint as per existing colour, writing SM/MES No.(size of letters as ordered) after preparation of old painted surfaces complete all as specified and as directed
M&L painting to centrifugal pump/motor of capacity 10HP capacity with one coat of synthetic enamel paint as per existing colour, writing SM/MES No.(size of letters as ordered) after preparation of old painted surfaces complete all as specified and as directed
M&L painting to centrifugal pump/motor of capacity 7.5HP capacity with one coat of synthetic enamel paint as per existing colour, writing SM/MES No.(size of letters as ordered) after preparation of old painted surfaces complete all as specified and as directed
S&F in repair, water preesure guage of capacity 7.5Kg/Sqmm, guage dial type complete all as required and as directed.
Cleaning of RCC OHT of 20 mtr staging height at Main pump house Basishta, capacity 1,00,000 Gallons, using following stages cleaning process including arrangement of necessary T&P, labour and Chemicals mechanize etc before starting process of cleaning complete all as specified and as directed. (a) Mechanized Dewatering (b) Sludge Removal (c) High Pressure Cleaning (d) Vaccum cleaning (e) Antibacterial spray (f) UV radiation. (g) Painting two coats of black bituminous paint on internal surface of Over Head water reservoir after cleaning the tank. Note:- (i) The entire work shall be carried out by well experienced personal/firms having experience of similar nature of work. (ii) Entire T&P and all Safty measure during the work shall be arranged by the contractor at his own cost. (iii) "Date of cleaning" shall be written over the outer surface at appropriate level to be decided by Engineer-in-charge with synthetic enamel paint of letteres not less than 100mm height and the cost of the same shall be deemed to include in the quoted unit rate of the contractor.
Cleaning of RCC OHT of 20 mtr staging height at Main pump house Basishta, capacity 76,000 Gallons, using following stages cleaning process including arrangement of necessary T&P, labour and Chemicals mechanize etc before starting process of cleaning complete all as specified and as directed. (a) Mechanized Dewatering (b) Sludge Removal (c) High Pressure Cleaning (d) Vaccum cleaning (e) Antibacterial spray (f) UV radiation. (g) Painting two coats of black bituminous paint on internal surface of Over Head water reservoir after cleaning the tank. Note:- (i) The entire work shall be carried out by well experienced personal/firms having experience of similar nature of work. (ii) Entire T&P and all Safty measure during the work shall be arranged by the contractor at his own cost. (iii) "Date of cleaning" shall be written over the outer surface at appropriate level to be decided by Engineer-in-charge with synthetic enamel paint of letteres not less than 100mm height and the cost of the same shall be deemed to include in the quoted unit rate of the contractor.
Cleaning of RCC OHT of 20 mtr staging height in MAP Qtrs Basishta, capacity 18,000 Gallons, using following stages cleaning process including arrangement of necessary T&P, labour and Chemicals mechanize etc before starting process of cleaning complete all as specified and as directed. (a) Mechanized Dewatering (b) Sludge Removal (c) High Pressure Cleaning (d) Vaccum cleaning (e) Antibacterial spray (f) UV radiation. (g) Painting two coats of black bituminous paint on internal surface of Over Head water reservoir after cleaning the tank. Note:- (i) The entire work shall be carried out by well experienced personal/firms having experience of similar nature of work. (ii) Entire T&P and all Safty measure during the work shall be arranged by the contractor at his own cost. (iii) "Date of cleaning" shall be written over the outer surface at appropriate level to be decided by Engineer-in-charge with synthetic enamel paint of letteres not less than 100mm height and the cost of the same shall be deemed to include in the quoted unit rate of the contractor.
Cleaning of RCC Semi Uner Ground Sump at Main Pump house Basishta, capacity 1,50,000 Gallons, using following stages cleaning process including arrangement of necessary T&P, labour and Chemicals mechanize etc before starting process of cleaning complete all as specified and as directed. (a) Mechanized Dewatering (b) Sludge Removal (c) High Pressure Cleaning (d) Vaccum cleaning (e) Antibacterial spray (f) UV radiation. (g) Painting two coats of black bituminous paint on internal surface of Semi UG sump after cleaning the tank. Note:- (i) The entire work shall be carried out by well experienced personal/firms having experience of similar nature of work. (ii) Entire T&P and all Safty measure during the work shall be arranged by the contractor at his own cost. (iii) "Date of cleaning" shall be written over the outer surface at appropriate level to be decided by Engineer-in-charge with synthetic enamel paint of letteres not less than 100mm height and the cost of the same shall be deemed to include in the quoted unit rate of the contractor.
Cleaning of RCC Semi Uner Ground Sump at Main Pump house Basishta, capacity 1,00,000 Gallons, using following stages cleaning process including arrangement of necessary T&P, labour and Chemicals mechanize etc before starting process of cleaning complete all as specified and as directed. (a) Mechanized Dewatering (b) Sludge Removal (c) High Pressure Cleaning (d) Vaccum cleaning (e) Antibacterial spray (f) UV radiation. (g) Painting two coats of black bituminous paint on internal surface of Semi UG sump after cleaning the tank. Note:- (i) The entire work shall be carried out by well experienced personal/firms having experience of similar nature of work. (ii) Entire T&P and all Safty measure during the work shall be arranged by the contractor at his own cost. (iii) "Date of cleaning" shall be written over the outer surface at appropriate level to be decided by Engineer-in-charge with synthetic enamel paint of letteres not less than 100mm height and the cost of the same shall be deemed to include in the quoted unit rate of the contractor.
M&L Earthing with Galvanised Iron Earth Plate Electrode 600X600X6.0mm buried directly in Ground vertically at a depth not less than 2.25 METRE below Ground Level with the Top Edge of Earth Plate at a depth not less than 1.50 METRE below Ground Level connected to Galvanised Iron Strip 25X4.0mm as Earth Lead by means of Bolts, Nuts, Check Nuts and Washers of Galvanised Steel, Earth Plate Electrode surrounded by a packed thickness of Char Coal or Coke Dust mixed with common Salt in alternate layers not exc. 150mm thick, Galvanised Iron Strip protected with and including Galvanised Iron Pipe 40mm Bore (dia) Light Grade, upto 1.0 METRE above the Floor Level of the Building where Main Switch/DB situated including PCC Pit in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and RCC Cover of size 500X500X40mm in RCC 1:2:4 (20mm Graded Stone Aggregate) reinforced with and including 8mm dia TMT Bars @ 100mm centre to centre both ways, Galvanised Iron Wire Mesh, Funnel, Galvanised Iron Watering Pipe 20mm Bore (dia) Medium Grade, necessary Excavation in Soft/Loose Soil, returning, filling in and removal of surplus Spoil upto a distance of 50.00 METRE and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on completion including Taking down unserviceable Earthing, complete all as specified and as directed.
S&F in repair 200 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head & brass spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing complete all as specified & directed.
S&F in repair 150 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head & brass spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing complete all as specified & directed.
S&F in repair 100 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head & brass spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing complete all as specified & directed.
S&F in repair 80 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head & brass spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing complete all as specified & directed.
Repairs to 250mm bore cast iron flanged & drilled both ends sluice valve,by opening up of valve, replacement of brass spindle including replacement of Gasket and providing of new nuts, bolts as required complete all as directed.
Repairs to 200mm bore cast iron flanged & drilled both ends sluice valve,by opening up of valve, replacement of brass spindle including replacement of Gasket and providing of new nuts, bolts as required complete all as directed.
Repairs to 150mm bore cast iron flanged & drilled both ends sluice valve,by opening up of valve, replacement of brass spindle including replacement of Gasket and providing of new nuts, bolts as required complete all as directed.
Repairs to 100mm bore cast iron flanged & drilled both ends sluice valve,by opening up of valve, replacement of brass spindle including replacement of Gasket and providing of new nuts, bolts as required complete all as directed.
Repairs to 80mm bore cast iron flanged & drilled both ends sluice valve,by opening up of valve, replacement of brass spindle including replacement of Gasket and providing of new nuts, bolts as required complete all as directed.
S&F in repair CI Reflux/ Non Return valve single door pattern with flanged ends PN-1.6 confirming to IS: 5312, ISI marked of size 100mm dia bore with bypass arrange ment including all fixing accessoriestype Cast iron flanged end with nuts, rubber gasket, bolts (full threaded), nuts & washers complete all as specified and as directed.
S&F in repair CI Reflux/ Non Return valve single door pattern with flanged ends PN-1.6 confirming to IS: 5312, ISI marked of size 200mm dia bore with bypass arrange ment including all fixing accessoriestype Cast iron flanged end with nuts, rubber gasket, bolts (full threaded), nuts & washers complete all as specified and as directed.
S&F in repair CI Foot valve of size 100 mm bore with gun metal working parts complying with IS:4038 heavy duty, flanged end including rubber/fibre board insertion gasket joints, nuts, bolts & washers complete all as specified and as directed.
S&F in repair CI Foot valve of size 150 mm bore with gun metal working parts complying with IS:4038 heavy duty, flanged end including rubber/fibre board insertion gasket joints, nuts, bolts & washers complete all as specified and as directed.
S&F in repair CI Foot valve of size 200 mm bore with gun metal working parts complying with IS:4038 heavy duty, flanged end including rubber/fibre board insertion gasket joints, nuts, bolts & washers complete all as specified and as directed.
Burning out lead joint in position for 80mm bore, CI SPIGOT AND SOCKET PIPES AND FITTINGS including removing old lead complete all as directed.
Burning out lead joint in position for 100mm bore, CI SPIGOT AND SOCKET PIPES AND FITTINGS including removing old lead complete all as directed.
Burning out lead joint in position for 150mm bore, CI SPIGOT AND SOCKET PIPES AND FITTINGS including removing old lead complete all as directed.
Burning out lead joint in position for 200mm bore, CI SPIGOT AND SOCKET PIPES AND FITTINGS including removing old lead complete all as directed.
M&L Run lead joint for 80mm dia CI SPIGOT AND SOCKET PIPES AND FITTINGS complete all as specified and as directed.
M&L Run lead joint for 100mm dia CI SPIGOT AND SOCKET PIPES AND FITTINGS complete all as specified and as directed.
M&L Run lead joint for 150mm dia CI SPIGOT AND SOCKET PIPES AND FITTINGS complete all as specified and as directed.
M&L Run lead joint for 200mm dia CI SPIGOT AND SOCKET PIPES AND FITTINGS complete all as specified and as directed.
Labour only Run lead joint for 80mm dia CI SPIGOT AND SOCKET PIPES AND FITTINGS complete all as directed. Note: Old lead reteravied from Stl item No. 49 to be reused
Labour only Run lead joint for 100mm dia CI SPIGOT AND SOCKET PIPES AND FITTINGS complete all as directed. Note: Old lead reteravied from Stl item No. 50 to be reused
Labour only Run lead joint for 150mm dia CI SPIGOT AND SOCKET PIPES AND FITTINGS complete all as directed. Note: Old lead reteravied from Stl item No. 51 to be reused
Labour only Run lead joint for 200mm dia CI SPIGOT AND SOCKET PIPES AND FITTINGS complete all as directed. Note: Old lead reteravied from Stl item No. 52 to be reused
M&L in repair, rubber or fibre board gasket joint suitable for ductile iron pipe of 100mm dia including nut, bolts and washers complete all as specified and as directed.
M&L in repair, rubber or fibre board gasket joint suitable for ductile iron pipe of 150mm dia including nut, bolts and washers complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning the reuseable pipe for refixing or removal of 20mm bore complete all as specified and directed
Taking up or down steel tubing and connections, including cleaning the reuseable pipe for refixing or removal of 25/32mm bore complete all as specified and directed
Taking up or down steel tubing and connections, including cleaning the reuseable pipe for refixing or removal of 40/50mm bore complete all as specified and directed
Taking up or down steel tubing and connections, including cleaning the reuseable pipe for refixing or removal of 80mm bore complete all as specified and directed
Taking up or down steel tubing and connections, including cleaning the reuseable pipe for refixing or removal of 100mm bore complete all as specified and directed
S&F 20mm bore GI pipe medium grade water tube with all fittings laid in trenches complete all as specified and as directed.
S&F 25mm bore GI pipe medium grade water tube with all fittings laid in trenches complete all as specified and as directed.
S&F 40mm bore GI pipe medium grade water tube with all fittings laid in trenches complete all as specified and as directed.
S&F 50mm bore GI pipe medium grade water tube with all fittings laid in trenches complete all as specified and as directed.
S&F 80mm bore GI pipe medium grade water tube with all fittings laid in trenches complete all as specified and as directed.
S&F 100mm bore GI pipe medium grade water tube with all fittings laid in trenches complete all as specified and as directed.
Refixing old serviceable steel tubing in trenches of 15mm bore with necessary GI (medium grade) fittings complete all as specified and as directed. Note:- Serviceable pipe obtained from item No.63 here-in-above
Refixing old serviceable steel tubing in trenches of 25/32mm bore with necessary GI (medium grade) fittings complete all as specified and as directed. Note:- Serviceable pipe obtained from item No.64 here-in-above
Refixing old serviceable steel tubing in trenches of 40/50mm bore with necessary GI (medium grade) fittings complete all as specified and as directed. Note:- Serviceable pipe obtained from item No.65 here-in-above
Refixing old serviceable steel tubing in trenches of 80mm bore with necessary GI (medium grade) fittings complete all as specified and as directed. Note:- Serviceable pipe obtained from item No.66 here-in-above
Refixing old serviceable steel tubing in trenches of 100mm bore with necessary GI (medium grade) fittings complete all as specified and as directed. Note:- Serviceable pipe obtained from item No.67 here-in-above
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for taking out / laying pipes etc. and getting out, in soft/loose soil, complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/loose soil, complete all as specified and as directed.
Removing excavated material, soils, n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.
S&F in repair, 50mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair, 40mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair, 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair, 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair, 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F in repair, 25mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
M.G. ENTERPRISE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .