Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.8 LAccepted-AOC FLAT NO 1004 BUILDING NO L 11 KEDAR HOUSING SOCIETY 10TH FLOOR SECTOR NO 21 TALOJA PHASE 2 PANVEL RAIGAD NAVI MUMBAI 410208 | NAVI MUMBAI | RAIGAD | MAHARASHTRA | 410208 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹39.4 L+₹53,683 (1.38%)Rejected-Finance | L2 | Rejected-Finance Second lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
29 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Sambra
GE AF Sambra ATS Sambra Belgaum 591124
REPAIR REPLACEMENT OF MAINTENANCE OF MISC ELECTRICAL EQUIPMENTS AT AFS SAMBRA
2024_MES_648432_1
GE(AF)/SAM/TOK-02 OF 2024-25
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE AF Sambra
Please refer Tender documents
8 documents required · 8 mandatory
₹500
GE AF Sambra
₹1 L
Yes
13 Jun 2024
30 Mar 2024
1 May 2024
30 Mar 2024
29 Apr 2024
17 Apr 2024
Amount
Excavation in trenches not exceeding 1.5m depth and n.exc 1.5m wide and getting out in hard / dense soil for laying cable/erecting poles or similar work complete all as specified and directed.
Returning and filling in soil including spreading levelling watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Removing of excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Cutting hard standings / bituminous layer for laying pipe including refilling back, ramming up and finishing the surface to match with the surroundings complete all as specified and directed.
Taking out the unserviceable /out lived/chocked HDPE/ UPVC/ Mild Steel water tubing of following sizes from trenches/wall/ceiling/floors and offering credit complete all as specified and directed:- Note:-Excavation, earth work shall be measured and paid separately.
150 mm bore
100/110 mm bore
63/75/80 mm bore
50 mm bore
40 mm bore
25 mm bore
S&F High density polyethylene pipes (HDPE) of pressure rating 6 kgf/sqcm laid in trenches of following sizes complete all as specified and directed:-
150 mm bore
110 mm bore
80 mm bore
63 mm bore
50 mm bore
40 mm bore
S&F water tubing, Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid in trenches of following sizes complete all as specified and directed :-
50 mm bore
40 mm bore
25 mm bore
Supplying and laying mild steel pipes, heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of following sizes complete all as specified and directed :-
150 mm bore
100 mm bore
Taking down the pump set from motor unit by disconnecting carefully and dismantling, opening complete pump set, cleaning, replacing of unserviceable parts such as gun metal bushes, rubber packing, M S Nut, Bolts, rubber coupling (spider), Air valve and other worn out parts etc and re-assembling, installing back on original position, testing for smooth running complete all as specified and as directed for following capacity of pumps :- Note :- Spare parts replaced shall be measured and paid separately
05 HP Capacity
10 HP Capacity
15 HP Capacity
20 HP Capacity
05 HP Capacity (Submersible Type)
10 HP Capacity (Submersible Type)
15 HP Capacity (Submersible Type)
M&L for overhauling of motor unit, 3 phase, 415 volts by taking down, dismantling and opening completely, cleaning internal parts thoroughly, replacing minor parts such as nut bolts, washers, terminal plate, cable lugs and greasing including insulating materials, varnishing, heating, reassembling reinstalling and testing complete all as specified and as directed for the following capacity of motor :- Note:- Unit rate quoted shall be deemed to include for minor unserviceable parts as mentioned/ required for repairs. All other major spares as specified hereinafter will be measured and paid separately
05 HP Capacity
10 HP Capacity
15 HP Capacity
20 HP Capacity
05 HP Capacity (Submersible Type)
10 HP Capacity (Submersible Type)
15 HP Capacity (Submersible Type)
M&L for rewinding of electric motor upto 20 HP capacity by taking out from foundation, disconnecting cable connections, dismantling motor, removing all parts, removing burnt copper wire, rewinding with new super enamel copper wire with same gauge, same No of turns, E class insulating material, varnishing, heating etc and installing back to its original position and testing for smooth functioning etc complete all as directed:- Note :- Unit rate quoted shall be deemed to be included minor parts i.e., nut bolts, washers, terminal plate, cable lugs, etc
05 HP Capacity
10 HP Capacity
15 HP Capacity
20 HP Capacity
05 HP Capacity (Submersible Type)
10 HP Capacity (Submersible Type)
15 HP Capacity (Submersible Type)
S&F in repairs Cast iron Non return butterfly valves of size 100mm dia, PN 1.6 ,SS 304 disc complete all as specified and as directed.
S&F in repairs Cast iron Non return butterfly valves of size 80mm dia, PN 1.6 ,SS 304 disc complete all as specified and as directed.
S&F in repairs Sluice valve, class PN-1, heavy duty with flanged ends having high stainless steel spindle, cast iron wheel, shut down and open direction marked on wheel, confirming to IS-14846-2000 and fixing up complete by providing rubber insertion sheet,nut, bolt, washer etc complete of following sizes:-
200 mm dia
150 mm dia
S&F in repair gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete of following size :-
50 mm dia
40 mm dia
25 mm dia
S&F in repairs brass impeller set suitable for following capacity centrifugal pump sets (Submersible / Monoblock / Non Clog Type) complete all as specified and directed. :-
05 HP Capacity
10 HP Capacity
15 HP Capacity
20 HP Capacity
05 HP Capacity (Submersible Type)
10 HP Capacity (Submersible Type)
15 HP Capacity (Submersible Type)
S&F in repairs pump shaft suitable for centrifugal/ monoblock pump set for following capacity of Pump Sets (Submersible / Monoblock / Non Clog Type) complete all as specified and directed.:-
05 HP Capacity
10 HP Capacity
15 HP Capacity
20 HP Capacity
05 HP Capacity (Submersible Type)
10 HP Capacity (Submersible Type)
15 HP Capacity (Submersible Type)
S&F in repairs ball bearing suitable for centrifugal pump set of following capacity of pump set (Submersible / Monoblock / Non Clog Type) :-
05 HP Capacity
10 HP Capacity
15 HP Capacity
20 HP Capacity
05 HP Capacity (Submersible Type)
10 HP Capacity (Submersible Type)
15 HP Capacity (Submersible Type)
S&F in repairs bush for main shaft drive suitable for pump set of following capacity (Submersible / Monoblock / Non Clog Type) :-
05 HP Capacity
10 HP Capacity
15 HP Capacity
20 HP Capacity
05 HP Capacity (Submersible Type)
10 HP Capacity (Submersible Type)
15 HP Capacity (Submersible Type)
S&F in repair Fully Automatic Star Delta starter type (FASD) including timer, over load relay, single phase preventor, including wiring etc complete of followong capacity all as specified and as directed :-
ML-3 FASD Starter
ML-2 FASD Starter
ML-1.5 FASD Starter
ML- 1 FASD Starter
S&F in repair Power contactor suitable for star delta/ DOL starter including necessary connections with PVC insulated cable for the following capacit complete all as specified and directed :-
ML-3 Power Contactor
ML-2 Power Contactor
ML-1.5 Power Contactor
ML- 1 Power Contactor
S&F Over load relay assembly suitable for star delta starter, including rewiring with copper insulated cable for the following capacity including removing the unserviceable over load relay assembly complete all as specified and directed :-
ML-3 Over Load Relay
ML-2 Over Load Relay
ML-1.5 Over Load Relay
ML-1 Over Load Relay
Taking out the existing filter media from filter bed No.1 & 2 of the capacity 10 Lakh Gallons per day and removing the existing totally impregnated / out lived filter media, cleaning the entire filter bed thoroughly and replacing the filter media in layers, setting back the filters and testing for smooth functioning complete all as specified and directed.
M&L for stone gravel (round pebbles) of size 38mm to 65 mm for filling the filter media complete all as specified and directed.
M&L for stone gravel (round pebbles) of size 20 mm to 38mm for filling the filter media complete all as specified and directed.
M&L for stone gravel (round pebbles) of size 12 mm to 20 mm for filling the filter media complete all as specified and directed.
M&L for stone gravel (round pebbles) of size 5 mm to 12 mm for filling the filter media complete all as specified and directed.
M&L for coarse sand 0.6 mm size for filling the filter media complete all as specified and directed.
M&L for fine sand for filling the filter media complete all as specified and directed.
Cleaning of under ground sumps after scrapping out the scales / deposits from inner surface of the sump thoroughly washing with bleaching powder and soda ash, bailing out the settled materials completely and finally cleaning with clean water including writing 'TANK CLEANED ON......." (date) with 10 cm size white letters on black back ground engaging skilled artist using best quality synthetic enamel paint complete all as specified and directed for the following capacity for the following sizes:-
1,00,000 Gallons capacity at Pump House No. 2
20,000 Gallons capacity at Pump House No. 2
50,000 Gallons capacity at Pump House No. 2
35,000 Gallons capacity at Pump House No. 3
15,000 Gallons capacity at Pump House No. 4
6,00,000 Gallons capacity at Water treatment plant
1,50,000 Gallons capacity clarifier tank at Water treatment plant
25,000 ltrs capacity waste water collection UG sump at Water treatment plant
60,000 Gallons capacity UG Sump at PH No.5
75,000 Gallons capacity UG Sump at PH No.6
50,000 Gallons capacity UG Sump at PH No.2
Cleaning of RCC over head tank after scrapping out the scales / deposits from inner surface of the sump thoroughly washing with bleaching powder and soda ash, bailing out the settled materials completely and finally cleaning with clean water including writing 'TANK CLEANED ON......." (date) with 10 cm size white letters on black back ground engaging skilled artist using best quality synthetic enamel paint complete all as specified and directed for the following capacity for the following sizes:-
1,00,000 glns capacity at 80 feet staging Pump House No. 2
50,000 glns capacity at 30 feet staging at Pump House No. 2
50,000 glns capacity at 80 feet staging at Pump House No. 2
15,000 glns capacity at 50 feet staging at Pump House No. 2
50,000 glns capacity at 50 feet staging at Pump House No.3
20,000 glns capacity at 50 feet staging at Pump House No.4
25,000 glns capacity at 30 feet staging at Water treatment plant.
Cleaning of Sewage collection tank 1Lakh Gallon capacity of sewage treatment plant after pumping out the settled sewage sludge, scrapping out the scales / deposits from inner surface of the clarifier, thoroughly washing with bleaching powder and soda ash, bailing out the settled materials completely and finally cleaning with clean water including writing 'TANK CLEANED ON......." (date) with 10 cm size white letters on black back ground engaging skilled artist using best quality synthetic enamel paint .complete all as specified and directed
Cleaning of Aerator tanks set of three compartment of sewage treatment plant of capacity 700 cum per day after pumping out the settled sewage sludge, scrapping out the scales / deposits from inner surface of the clarifier, thoroughly washing with bleaching powder and soda ash, bailing out the settled materials completely and finally cleaning with clean water including writing 'TANK CLEANED ON......." (date) with 10 cm size white letters on black back ground engaging skilled artist using best quality synthetic enamel paint complete all as specified and directed
Cleaning of Clarifier of sewage treatment plant of capacity 700 cum per day after pumping out the settled sewage sludge, scrapping out the scales / deposits from inner surface of the clarifier, thoroughly washing with bleaching powder and soda ash, bailing out the settled materials completely and finally cleaning with clean water including writing 'TANK CLEANED ON......." (date) with 10 cm size white letters on black back ground engaging skilled artist using best quality synthetic enamel paint complete all as specified and directed
Cleaning of UG sewage sump of capacity 1,00,000 ltrs capacity of 8 m depth at South Camp after pumping out the settled sewage sludge, scrapping out the scales / deposits from inner surface of the clarifier, thoroughly washing with bleaching powder and soda ash, bailing out the settled materials completely and finally cleaning with clean water including writing 'TANK CLEANED ON......." (date) with 10 cm size white letters on black back ground engaging skilled artist using best quality synthetic enamel paintcomplete all as specified and directed
Cleaning of UG clear water sump of capacity 1,00,000 ltrs capacity at STP after pumping out the settled sewage sludge, scrapping out the scales / deposits from inner surface of the clarifier, thoroughly washing with bleaching powder and soda ash, bailing out the settled materials completely and finally cleaning with clean water including writing 'TANK CLEANED ON......." (date) with 10 cm size white letters on black back ground engaging skilled artist using best quality synthetic enamel paintcomplete all as specified and directed
Cleaning of Swimming pool of size 24 mtr x 12.5 mtr with dewatering the whole pool and cleaning complete with required tools and plants such as ladder, steel wall brushes, suction pump etc and cleaning material such as cotton waste,wire brush,viper with required men power, acid wash on walls and bottom tiles & over flow channel and further cleaning with chemical / bleaching powder/soda ash, dried complete and refilling with water upto existing level including cleaning surrounding area, gross cutting all as specified & directed
Cleaning of Clarifier of sewage treatment plant of capacity 25 cum per day after pumping out the settled sewage sludge, scrapping out the scales / deposits from inner surface of the clarifier, thoroughly washing with bleaching powder and soda ash, bailing out the settled materials completely and finally cleaning with clean water including writing 'TANK CLEANED ON......." (date) with 10 cm size white letters on black back ground engaging skilled artist using best quality synthetic enamel paint complete all as specified and directed
Cleaning of reactor chamber with interim collection tank of sewage treatment plant of capacity 25 cum per day after pumping out the settled sewage sludge, scrapping out the scales / deposits from inner surface of the clarifier, thoroughly washing with bleaching powder and soda ash, bailing out the settled materials completely and finally cleaning with clean water including writing 'TANK CLEANED ON......." (date) with 10 cm size white letters on black back ground engaging skilled artist using best quality synthetic enamel paint complete all as specified and directed .
Cleaning of clear water tank of capacity 25cum per day at STP MES key person quarters after pumping out the settled sewage sludge, scrapping out the scales / deposits from inner surface of the clarifier, thoroughly washing with bleaching powder and soda ash, bailing out the settled materials completely and finally cleaning with clean water including writing 'TANK CLEANED ON......." (date) with 10 cm size white letters on black back ground engaging skilled artist using best quality synthetic enamel paint complete all as specified and directed
M&L for preparing the old treated steel surfaces of MS sheet/angle iron/Any sizes of pipe/All type of Doors, Shutters and installation main gate at STP (North Camp/South Camp/MES Colony)/WTP/ Swimming Pool/Pump House No. 2,3,4 & 5 and applying two coats of synthetic enamel paint all as specified & directed.
S&F Starter DOL type suitable for motor up to 5 HP, 3phase, along with suitable relay, contactor and connectors pre wired and connecting to existing system with pump sets after taking down existing unserviceable starter complete all as specified & directed.
S&F mechanical joint suitable for existing pipe and including taking down existing joint of following sizes complete all as specified and directed:-
200 mm dia
150 mm dia
100 mm dia
Ductile iron/ Cast iron / Mild steel fittings such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc) tee pieces single branch ‘Y’ junction, double branch, cross (all socket or socket and spigot or flanged and socket etc) color, caps and plugs suitable for DI/CI pipe upto 150 mm dia complete all as specified and as directed.
S&F in repair manila rope 25 mm dia for suction sweeper heavy duty complete all as specified and as directed.
S&F in repair suction sweeper Brush including iron brush wheel, brass spring, rubber packing, split pins including MS bracket complete with rubber wheels, spindles & necessary welding work etc complete all as specified and as directed.
M&L for Overhauling suction sweeper set of 3 HP capacity by replacing coupling of suction side (set of two - 1 No) pump & motor bearing (Each 1 No) including cleaning , testing for smooth functioning complete all as specified and as directed. Note:- Unit rate quoted shall be deemed to be included the cost of coupling, bearing & minor parts i.e., nut bolts, washers, etc
Testing of chemical analysis of water for swimming pool by sending sample to NABL accredited lab at every quarter including collection & submitting the results to Engineer-in-charge and copy displayed on the board at swimming pool all as specified & directed
Material & Labour for Cleaning of swimming pool of size 26m x 12.5m, bottom and side walls, twice in a week, using suction sweeper fitted with nylon brush complete all as specified and directed. Note :- Quoted rate is deemed to be included the following :- (a) Suction sweeper fitted with nylon brush shall be provided by the contractor. (b) Repairs to the suction sweeper including replacement of leather/ rubber flaps, bolts/nuts, washers etc., shall be carried out by the contractor. (c) The cost of maintaining the diving platform (d) Nylon brush fitted with suction sweeper shall be replaced with new one, in every three months (f) Items such as Alum ferric, Copper sulphate, bleaching powder, Chlorine gas etc will be issued by the department on free for usageand shall be added as required (h) The Aeration Cascade shall be cleaned once in a month
Testing of treated sewage water once in three months by sending the treated water samples to the authorized NABL accredited lab and collection & submitting the results to Engineer-in-charge and displayed on the board at STP all as specified & directed. The Result shall be comply the following parameters :- (a) PH :6.5-8.5 (KSPCB Limit) (b) BOD at 20 Degree C - <10mgL (c) COD -150mg/L Turbidity : 5 NTU Maximum (KSPCB Limit) (d) Total Suspended solids : 30 mg/L Maximum (KSPCB Limit) (e) Residual chlorine : 1.0 mg/L Maximum (KSPCB Limit) (f) E. Coli : Nil CFU (KSPCB Limit)
Taking out Aerator motor set of capacity of 15 HP from reduction gear box and existing foundation after disconnecting of electric connection & necessary pipe line by opening nut bolts etc and dismantling the aerator motor set for carrying out the repairs and rewinding to aerator motor of any make with supper enamelled copper winding wire of existing size including insulating materials i e varnish , sleeves etc, replacement of worn out nuts, bolts and washers, derusting, descaling, servicing, oiling, greasing re-assembling,making good all electric connections after fixing back to original position, testing for proper smooth functioning entire unit complete all as specified & directed Note :- Spare parts shall be measured and paid separately under relevant items
Taking out Clarifier motor set of capacity 1HP from Reduction gear box and existing foundation after disconnecting of electric connection & necessary pipe line by opening nut bolts etc and dismantling the Clarifier motor set for carrying out the repairs, rewinding to Clarifier motor of any make with supper enamelled copper winding wire of existing size, insulating materials i e varnish , sleeves etc, replacement of wornout nuts, bolts and washers, derusting, descaling, servicing, oiling, greasing, re-assembling, making good all electric connections, fixing back to original position, testing for smooth functioning entire unit complete all as specified & directed Note- Spare parts will be measured and paid separately
S&F Mild steel Base Plate of thickeness 4 mm, 3 sqm suitable for aerator motor set/clarifier motor set all as specified & directed
S&F Mild steel Base Plate of thickeness 6 mm, 3 sqm suitable for aerator motor set/clarifier motor set all as specified & directed
Overhauling of Reduction Gear Box of Aerator motor of capacity 10 HP and Clarifier motor of capacity 1HP by taking down, dismantling including replacement of parts such as bearing oil seal, inside metal bush, outside metal bush, nut bolts, rubber packing & other minor parts etc, greasing & replacing lubricant oil, reassembling, installing back to original position & testing for smooth functioning complete all as specified & directed . Note :- Spare parts shall be measured and paid separately
Supply only following spare parts for Reduction Gear Box of Aerator motor of capacity 10 HP and Clarifier motor of capacity 1HP :-
Oil filter plug
Hexoganal Bolt & nuts
Screwed adjustener
Impeller nut cover
Locking Washer
Allen screw
Seal cover
Allen cover
O ring
Circlip
Rertaining washer
Cable clamp
Upper seal.
Lower seal.
Supply & filling Gear oil suitable for aerator motor/Clarifier motor for top up all asspecified & directed.
S&F PVC Collar of size 150 mm suitable for existing HDPE pipe and including taking down existing pipe complete all as specified and directed
All as per Srl item No.58 here in before but of 100 mm bore.
All as per Srl item No. 58 here in before but of 80 mm bore.
S&F in replacement Chain Pulley Block 1Ton Single fall CPB with chain 8mm thick including fixing arrangements complete all as specified and directed.
S&F in replacement 3 core flat multistranded copper cable 10 sqmm for submersible pump set including necessary connection and testing complete all as specified and as directed.
S&F in replacement 3 core flat multistranded copper cable 6 sqmm for submersible pump set including necessary connection and testing complete all as specified and as directed.
M&L for Chlorine PPM test kit with coloured ample complete with all testing fitments and OT solution in Rexene finish box complete all as specified and as directed.
M&L for Otoludine liquid in 500 ml bottle for testing the chlorine content in PPM in plants complete all as specified and as directed.
Taking down of defective motor of capacity 0.5 HP,415 Volt, 1440 RPM with gear assembly from chemical dozing system after disconnecting electric connection and servicing the motor, replacement of burnt copper winding & bearing etc, refixing in same position, making connection, testing for smooth functioning and complete all as specified and as directed.
Servicing of worm gear complete including, oiling greasing, checking for abnormal sound including replacement of wornout gear system and shaft complete all as specified and directed.
S&F PVC NRV assembly for inlet and outlet pipes complete all as specified and as directed.
M&L for mixing bleaching powder (WSP) for chlorinating water complete all as specified and directed.
M&L for mixing copper sulphate for the treatment of swimming pool water complete all as specified and directed.
M&L for mixing soda ash for the treatment of swimming pool water complete all as specified and directed.
Comprehensive maintenance / servicing of DG set of capacity 125 KVA Kirloskar Model No.4K1080TA G2 ENGINE SR.NO. 4H.7906 /1720122 including replacement of gasket tappet cover, oil, fuel and adjustment of engine with external including replacement of gasket tappet cover, oil, fuel and air filter adjustment of engine with externally cleaned complete all as specified and as directed by Engineer In Charge location at Pump House No: 02 .
Supply only Lub oil Filter of DG set 125KVA above as per Existing complete all as specified and directed.
Supply only Fuel Filter of DG set 125KVA above as per Existing complete all as specified and directed.
Comprehensive maintenance / servicing of DG set of capacity 75 KVA Kirloskar Engine Model 4R1040TA including replacement of gasket tappet cover, oil, fuel and adjustment of engine with external including replacement of gasket tappet cover, oil, fuel and air filter adjustment of engine with externally cleaned complete all as specified and as directed by Engineer In Charge location at Signal Section .
Supply only Lub oil Filter of DG set 75KVA above as per Existing complete all as specified and directed.
Supply only Fuel Filter of DG set 75KVA above as per Existing complete all as specified and directed.
Comprehensive maintenance / servicing of DG set of capacity 62.5 KVA Kirloskar Engine Model 4R1040T including replacement of gasket tappet cover, oil, fuel and adjustment of engine with external including replacement of gasket tappet cover, oil, fuel and air filter adjustment of engine with externally cleaned complete all as specified and as directed by Engineer In Charge location at NTTI and Class Room .
Supply only Lub oil Filter of DG set 62.5KVA above as per Existing complete all as specified and directed.
Supply only Fuel Filter of DG set 62.5KVA above as per Existing complete all as specified and directed.
Comprehensive maintenance / servicing of DG set of capacity 50 KVA Kirloskar Engine Model 4R1190 including replacement of gasket tappet cover, oil, fuel and adjustment of engine with external including replacement of gasket tappet cover, oil, fuel and air filter adjustment of engine with externally cleaned complete all as specified and as directed by Engineer In Charge location at BTI Hanger .
Supply only Lub oil Filter of DG set 50KVA above as per Existing complete all as specified and directed.
Supply only Fuel Filter of DG set 50KVA above as per Existing complete all as specified and directed.
Comprehensive maintenance / servicing of DG set of capacity 40 KVA Engine Kirloskar Model 4R1040 PLUS, Engine No. 4H.3048/1321880, Engine No. 4H.3048/1220675, Engine Model 4R1040T and HA494 including replacement of gasket tappet cover, oil, fuel and adjustment of engine with external including replacement of gasket tappet cover, oil, fuel and air filter adjustment of engine with externally cleaned complete all as specified and as directed by Engineer In Charge location at PH No.5, WTP, SMC & STP .
Supply only Lub oil Filter of DG set 40KVA above as per Existing complete all as specified and directed.
Supply only Fuel Filter of DG set 40KVA above as per Existing complete all as specified and directed.
Comprehensive maintenance / servicing of DG set of capacity 30 KVA and 35 KVA Kirloskar Engine Model HA494 - 03 Nos and Engine Kirloskar Model HA494, Engine No. 04.2002/0400117 including replacement of gasket tappet cover, oil, fuel and adjustment of engine with externally cleaned complete all as specified and as directed by Engineer In Charge location at Mutga, UEB, Signal Section and PH No.3.
Supply only Lub oil Filter of DG set 35KVA above as per Existing complete all as specified and directed.
Supply only Fuel Filter of DG set 35KVA above as per Existing complete all as specified and directed.
Comprehensive maintenance / servicing of DG set of capacity 15 KVA Engine Kirloskar Model HA294, Engine No. 02.2145/1223289 and Model No.HA294 G1 ENGINE SR.NO 02.8307/1720145 including replacement of gasket tappet cover, oil, fuel and adjustment of engine with externally cleaned complete all as specified and as directed by Engineer In Charge location at Bore well No.1, Catering Faculty and 2 T'Mess.
Supply only Lub oil Filter of DG set 15KVA above as per Existing complete all as specified and directed.
Supply only Fuel Filter of DG set 15KVA above as per Existing complete all as specified and directed.
Comprehensive maintenance / servicing of DG set of capacity 10 KVA for Kirloskar Model No.TA2 SR2 ENGINE SR.NO.21.1042/0200594 including replacement of gasket tappet cover, oil and fuel filter adjustment of engine with externally cleaned complete all as specified and as directed by Engineer In Charge location at PH No.4.
Supply only Lub oil Filter of DG set 10KVA complete all as specified and directed.
Supply only Fuel Filter of DG set 10KVA complete all as specified and directed.
Comprehensive maintenance / servicing of DG set of capacity 7.5 KVA for Kirloskar Model No.TA2 SR2 ENGINE SR.NO.21.8042/9800031 including replacement of gasket tappet cover, oil, fuel and adjustment of engine with externally cleaned complete all as specified and as directed by Engineer In Charge location at Open Well.
Supply only Lub oil Filter of DG set 7.5KVA above as per Existing complete all as specified and directed.
Supply only Fuel Filter of DG set 7.5KVA above as per Existing complete all as specified and directed.
Comprehensive maintenance / servicing of DG set of capacity 160 KVA for Kirloskar Model No.6K1080TA ENGINE SR.NO.6H.8422/1920037 and 6H.8412/1820148 including replacement of gasket tappet cover, oil, fuel and adjustment of engine with externally cleaned complete all as specified and as directed by Engineer In Charge location at Station HQ and 1000 Trainees Billet Mess.
Supply only Lub oil Filter of DG set 160KVA above as per Existing complete all as specified and directed.
Supply only Fuel Filter of DG set 160KVA above as per Existing complete all as specified and directed.
Comprehensive maintenance / servicing of DG set of capacity 100 KVA for Kirloskar Model No.4K1080TAG2 ENGINE SR.NO.4H.7906/1820306 including replacement of gasket tappet cover, oil, fuel and adjustment of engine with externally cleaned complete all as specified and as directed by Engineer In Charge location at STP 800 Cum/day South Camp.
Supply only Lub oil Filter of DG set 100KVA above as per Existing complete all as specified and directed.
Supply only Fuel Filter of DG set 100KVA above as per Existing complete all as specified and directed.
Note for Sl item No 72 to 104 :- i) All the spares replaced will be measured and paid separately the replacing labour charge of the unserviceable spares is deemed to be included in the quoted rate for the comprehensive maintenance charge. ii) The authorised service provider shall inspect, check and necessary servicing to be carried out for all the DG sets minimum once in two month to ensure the serviceability / safety of the plant. Further to such routine visits the service provider shall attend all the break down calls immediately on priority for carrying out necessary repairs / replacement of the unserviceable spares of the plants as and when directed. (iii) Replacing entire engine oil after draining the existing old burnt engine oil incl cleaning the entire sump thoroughly. (iv) Replacing lubricating oil filter element with new lubricating oil filter element with 'O' ring and new rectangular seal on the pilot located on lub pump with accessories such as mounting bolt & washer after taking down existing. (v) Replacing super lub oil by pass filter element with new super lub oil by pass filter element and new ring sealing after taking down existing. (vi) Replacing fuel filter element with new fuel filter element and new 'O' rings after taking down existing. (vii) Replacement of gasket rocker lever cover with new gasket rocker lever cover. (viii) Replacement of nut regular hexagon with new nut regular hexagon. (ix) Replacement of screw slotted set with new screw slotted set
Supply only Engine Oil (15W 40 / 20 W 40 K Oil Premium) suitable for DG set all as specified & directed.
S&F Battery 105 AH with initial charging and connecting up including taking down unserviceable lead acid battery complete all as directed.
S&F Battery 130 AH with initial charging and connecting up including taking down unserviceable lead acid battery complete all as directed.
S&F battery charger SMPS based suitable for 6 Amps, 12 volts batteries including taking out unserviceable battery charger any type complete all as specified and directed.
S&F Voltage Monitoring Relay (VMR) suitable for 3 phase, 40 to 160 KVA DG Set to AMF Panel and including taking out old VMR relay any type complete all as specified and directed.
Servicing of self starter after taking down from DG Set capacity upto 75 KVA, transporting to workshop, opening and replacing the defective parts / copper wire winding, reassembling, installing on original position, testing for smooth functioning complete all as specified and directed.
All as per the above item No. 110 but capacity of DG set 100 KVA to 160 KVA.
S&F in repair Battery Lead of size 35 Sq mm copper single core flexible wire FR PVC insulated with thimble complete all as specified and directed.
Supply & filling Coolant additive in 10 Ltrs pack complete all as specified and directed.
S&F in repair armed hose flexible suitable for 10 to 160 KVA complete all as specified and directed.
S&F change over off load switch 4 pole 63 Amp with sheet metal enclosure including necessary modification to accommodate the change over switch including with taking out old change over switch complete all as specified and as directed..
S&F in repairs single phase preventer in panel to prevent single phasing complete all as spcified and directed.
S&F in replacement Power contactor 4 pole 7.5 to 40 KVA, Type MCX 12 suitable for DG Set AMF panel, including necessary connections with PVC insulated suitable size wire complete all as specified and directed.
S&F in replacement Power contactor 4 pole 50 to 62.5 KVA, Type MCX 22 suitable for DG Set AMF panel including necessary connections with PVC insulated suitable size wire comlete complete all as specified and directed.
M&L for Power contactor 4 pole 75 to 160 KVA Type MCX 33 suitable for DG Set AMF panel, including necessary connections with PVC insulated suitable size wire including removing the unserviceable contactor complete all as specified and directed.
Supply and filling distilled water for top up levelling of batteries complete all as specified and directed.
S&F Door Hinges (Left handle) for DG set of any capacity suitable for existing door including with taking out old unserviceable hinges complete all as specified and directed.
All as per the above item No. 123 but door hinges (Right handle)
S&F relay cord 12 Volt suitable for 3 phase, 40 to 160 KVA DG Set to AMF Panel and including taking out old relay cord any type complete all as specified and directed.
S&F Push Switch for AMF Panel of DG set any capacity as per existing including taking out old unserviceable switches complete all as specified and directed.
All as per Srl item No.127 above but channel.
All as per Srl item No.127 above but 3 channel.
All as per Srl item No.127 above but 4 channel.
S&F LLOP (Low Lub Oil Pressure) for Panel of DG set any capacity including taking out old unserviceable switches complete all as specified and directed.
S&F in replacement glass channel relay 12 Volt for Panel of DG set any capacity as per existing switch complete all as specified and directed.
S&F in replacement CT Coil cap 75/5 Amp for Panel of DG set any capacity as per existing complete all as specified and directed.
S&F in replacement LVM (Line Voltage Monitor) for Panel of DG set any capacity as per existing complete all as specified and directed.
Cleaning the Radiator of DG Set of capapcity upto 75 KVA, cleaning and removing all scale and dirt, etc, arresting of leakages/blockages if any, complete all as specified and directed.
All as per Srl item No. 136 above but capacity 100 KVA to 160 KVA.
S&F in replacement bracket for street light fitting made out of 40 mm dia light grade GI tubing bend to required shape 1.5 m long including necessary GI clamps, nuts bolts and washers and fixing to the pole complete all as specified and directed
S&F in replacement FRP junction box of size 295 mm x 255 mm x 160 mm with self locking arrangement comprising of one No MCB SP 06 Amps with suitable din chanel, 4 way 32A PVC connector fixed to pole with Flat iron clamps of size 25x4 mm, nuts and bolts and connecting the incoming and out going cables, complete all as specified and directed
S&F in replacement 3 pole power contactor, 32 Amps rated capacity 50 cycles, 220/240 volts including Incoming & outgoing wiring with copper conductor of 10 sq mm size with suitable copper lugs and taking down the existing unserviceable one complete all as specified and directed
S&F in replacement LED Flood light fittings 200 Watt, presure die cast aluminium housing, toughened glass and high power LEDs, secondary lenses with IP 66 protection including Surge Protection Devices 10 KV, Heat resistant, resistant TRS cable, 6000-6500K cool white colour complete with all accessories & necessary fixing arrangement i.e. GI clamps, nuts bolts and washers etc complete all as specified and directed
S&F in replacement LED Flood light fittings 150 Watt, presure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP 66 protection including SPD 10 KV complete with all accessories & all necessary fixing arrangement i.e. GI clamps, nuts bolts and washers complete all as specified and directed
S&F in replacement LED Flood light fittings 100 Watt , presure die cast aluminium housing, toughened glass and high power LEDs, secondary lenses, IP 66 protection, surge protector device 10 KV, with all accessories & necessary fixing arrangement i.e. GI clamps, nuts bolts and washers complete all as specified and directed
S&F in replacement SURROUND ULTRA high efficiency round highbay of 150 wattage, PDC housing, luminiare shall have effacacy upto 130 Lm/Watt, IP 66 protection & all necessary fixing arrangement i.e. GI clamps, nuts bolts and washers complete all as specified and directed
S&F in replacement ROVER PRO LED Flood light fittings 50 Watt with presure die cast aluminium housing, toughened glass, high power LEDs, secondary lenses, IP 66 protection, surge protector device 10 KV with all accessories & necessary fixing arrangement i.e. GI clamps, nuts bolts and washers complete all as specified and directed
S&F in replacement Bamboo-IP-66 new generation,energy saving, environmental freindly, long life aesthetically designed aluminium ladscape luminaries for diffused lighting with high power LED 8 watt including neccassary excavation and PCC foundation for errecting Bollard as per manufacture recomendation complete all as specified and directed
S&F in replacement street light fitting ASTRA NEO LED 25 watt, pressure die cast housing, toughened glass and high power LEDs with secondary optics, IP-66 protection including necessary fixing arrangement i.e. GI clamps, nuts bolts and washers complete all as specified and directed
S&F in replacement street light fitting ASTRA NEO LED 30 watt, pressure die cast housing, toughened glass and high power LEDs with secondary optics, IP-66 protection including necessary fixing arrangement i.e. GI clamps, nuts bolts and washers complete all as specified and directed
S&F in replacement Street light fitting ASTRA NEO LED 45 watt, pressure die cast housing,toughened glass,high power LEDs with secondary optics, IP-66 protection including necessary fixing arrangement i.e. GI clamps, nuts bolts and washers complete all as specified and directed
S&F in replacement LED light fitting Driver of following specification complete all as specified and directed
25 W LED Driver
45 W LED Driver
100 W LED Driver
200 W LED Driver
250 W LED Driver
S&F in replacement LED Mushroom decorative gate light fitting made of high grade unbreakable polycarbonate material suitable for retrofit LED B22 base with 9W/10W lamp including LED driver complete all as specified and directed
M/s. VIJAY ELECTRICALS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .