Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.8 LAccepted-AOC | L1 | Accepted-AOC Award of Contract to lowest bidder | |
| 2 | L2₹27.3 L+₹2.5 L (9.91%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹27.3 L+₹2.5 L (10.3%)Rejected-Finance H NO 496 SECTOR 10 GURGAON 122001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹28.2 L+₹3.4 L (13.9%)Rejected-Finance RAMA PARK A 121 BLOCK A UTTAM NAGAR WEST DELHI DELHI 110059 | DELHI | WEST DELHI | DELHI | 110059 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹28.4 L+₹3.6 L (14.6%)Rejected-Finance 29 108 A STREET NO 10 VISHWAS NAGAR DELHI 110032 | DELHI | SHAHDARA | DELHI | 110032 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹43.7 L
EMD Value
₹87,400
Closing Date
13 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Delhi Cantt-10
GE South Delhi Cantt-10
ADDN/ALTN TO BLDG NO P-1 (OFFICERs MESS) RAO TULA RAM MARG OF DGIS UNDER AGE B/R-I and AGE E/M OF GE (SOUTH) DELHI CANTT-10
2024_MES_646712_1
GE/DS-109/2023-24
Open Tender
Civil Works
Item Rate
120 days
GE South Delhi Cantt
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹87,400
11 May 2024
16 Mar 2024
15 Apr 2024
16 Mar 2024
13 Apr 2024
30 Mar 2024
Amount
Dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar complete all as directed by Engr in charge and specified.
Demolition of mud in roof, any thickness, including plastering and leeping incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area or as directed complete all as directed by Engr in charge and specified.
M&L for brushing neat cement slurry with 3.00 Kg of cement per Sqm on existing surfaces all as directed by Engr-in-Charge.
M&L 40 mm thick (average thickness) plain cement concrete 1:2:4 type B-0 using (12.5 mm graded aggregate), as in roof ,padding to maintain the uniform slope complete all as specified and directed. Note : - WPC shall be measured & paid separately.
M & L for rendering 15 mm thick (average) plaster on concrete surfaces in CM (1:4) on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement all as specified and directed.
M&L for Priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified & as directed:-
(a) Applying oil bound bituminous primer at the rate of 0.30 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated.
(b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 30/40 confirming to IS-73 (Grade S-35).
(c) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyster matt, (weight not less than 160 gm/Sqm) with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface.
(d) Make of APP : "Moply FP" manufactured by STP Texsa Ltd or Hyper Plas (Polyester) manufactured by M/S IWL Ltd or "Shaliplas"ter) manufactured by M/S Capital Steels and Chemical Pvt Ltd or Makpolyplast manufactured by M/S M K Patro as approved by GE.
Note:- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectiveness of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work, or in lieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory completion of 10 years period.
M&L for preparation of new surface of APP membrane and applying two coats of aluminium paint at surfaces of any description, over 10cm in width or girth,not otherwise described
Demolition of cement concrete (unreinforced) in any description and in any position not otherwise specially provided for. complete all as directed by Engr in charge and specified.
M & L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete.
Supply only water proofing compound.(ISI Marked.Siko or equivalent)
Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling.
M&L 15 mm thick rendering with ready mix plaster ( as per manufacturer's instructions ) on faces of bricks or concrete surfaces , finished even and smooth without using extra cement ,complete all as specified and directed by Engr-in-Charge. Make : Birla Aerocon / Ultra Radiplast / ACC Acoplast.
M&L 10mm thick rendering on ceiling with ready mix plaster ( as per manufacturer's instructions ) on faces of bricks or concrete surfaces , finished even and smooth without using extra cement ,complete all as specified and directed by Engr-in-Charge. Make : Birla Aerocon / Ultra Radiplast / ACC Acoplast.
M&L for preparation of new plastered surfaces and applying two coats of distemper oil emulsion over water based primer with chalk whitening on wall surfaces complete all as specified and as directed .
M&L for preparation of new plastered surfaces and applying two coats of distemper oil emulsion over water based primer with chalk whitening on ceiling surfaces complete all as specified and as directed.
M& L for complete removal of existing treatment of old treted surface and applying two coats of distemper oil emulsion over water based primer with 3 mm thick JK wall putty on ceiling surfaces complete all as directed by Engr in charge and specified.
M& L for complete removal of existing treatment of old treted surface and applying two coats of distemper oil emulsion over water based primer with 3 mm thick JK wall putty on wall surfaces .
M&L for preparation of newly plastered surfaces on external wall/ ceiling, applying two more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance eterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm.complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old plastered surfaces on external wall/ ceiling, complete removal of existing treatment, washing, rubbing down and stopping of painted surface andapplying two more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance eterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm .complete all as specified and directed by Engr-in-Charge.
Demolition of reinforcement Concrete of any description and in any position not otherwise specifically provided for complete all as directed by Engr in charge and specified.
M&L for Reinforced cement concrete type B-1 (1:2:4) using 20 mm graded aggregates in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like (necessary form work is included with the item rate upto four sotrey bldgs)
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
S&F in repairs vitreous china wash down water closet pan EWC (pedestal pattern ) p or s type (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified
S&F in repairs Pillar taps fancy type cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe all as specified. Make:- Cera,Somany
S&F in repairs,15 mm bore, Wash hand basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs PVC connection for 15 mm bore pipe,450mm long all as specified. Make:Pryag/polytuf
S&F in repairs 32/ 40 mm bore and 750mm long PVC Waste pipe suitable for WHB /Sink/ urinal complete all as specified and directed by Engr- in - Charge
S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges
S&F in repairs, PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level complete.
S&F in repairs 15mm brass chromium plated fancy type bib tap long body with flange fixed in 15mm bore of pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 15 mm brass angle stop valves (fancy type), cast copper alloy , chromium palted, screwed down high pressure witg crutch and butter fly handles , screwed with iron pipes or for union complete all as specified .
S&F in repairs brass CP sewel shower rose of size 100/125mm with arm including fixing to steel pipes complete all as specified and directed.
S& F in repairs grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms)
S&F in repairs CP Health Faucet ABS body (Push type) with wall hook and 1.0 mtr SS Braded rubber hose pipe complete all as specified .
S&F in repairs 15 mm CP Bib cock 2 way with wall flange and single knobs complete with all fittings and as specified .
S&F in repairs Corner glass shelf 8-10 mm thick 300X200/ 400x200 with 'D' / F type brackets complete all as specified .
S&F in replacement 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed.
S&F in replacement 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed.
S&F in replacement cast iron sand soil waste or vent pipes 100 mm bore of pipe (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good to match with existing surfaces complete all as specified, for the following sizes of pipes:-
S&F in replacement cast iron sand soil waste or vent pipes 75 mm bore of pipe (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good to match with existing surfaces complete all as specified, for the following sizes of pipes:-
S&F in repairs, cast iron branch pieces 100 mm bore of pipe (ISI Marked), single (equal or unequal) ordinary of inverted spigot or socket type complete all as specified,for the following sizes of pipes:-
S&F in repairs, cast iron branch pieces 75 mm bore of pipe (ISI Marked), single (equal or unequal) ordinary of inverted spigot or socket type complete all as specified,for the following sizes of pipes:-
S & F in repairs CI Bends (any radius ), diminishing pieces or tapers of 100 mm dia fitted with oval access door complete all as specified.
S & F in repairs CI Bends (any radius ), diminishing pieces or tapers of 75 mm dia fitted without oval access door complete all as specified..
S & F in repairs Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 75 mm bore with cement joints, fitted with oval access doors complete.
S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100 mm bore pipes complete.
S&F in repairs PVC(SWR) pipes 110mm bore size single socketed, in any length with rubber ring joints, fixed to wall with and including MS flat iron clamp 25x 3 mm complete including taking down old rain water pipe.
S&F PVC(SWR) bends any radius, of 110mm bore size complete all as specified and directed by Engineer-in-Charge.
S&F in replacement rotational moulded water storage tank 500 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as directed.
S&F in replacement rotational moulded water storage tank 1000 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as directed.
S & F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15 mm bore complete.
S & F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete.
S&F in repairs Ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball ascrewed for iron pipe of 20mm bore and fixed complete.
S&F in repair Stainless steel sink with drainage board made out of 1 mm thick sheet of overall size 915x460mm with bowl size 410x330 x160mm with plugs washers, CP waste coupling and 40mm dia GI light grade waste pipe upto chamber fixed on and including cantilever angle iron 25x25x6mm (2 Nos) brackets complete including making good the disturbed surface using PCC 1:2:4 type B-I using 20 mm graded stone aggregate complete all as specified and directed.
M & L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting scrubbing down concrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over and including steel welded mesh having 2 mm dia of wire and aperature 50mm, total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc of slabs, chajjas,fins, facias, parapets, Lintels, columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 2 storey bldgs including finishes as existing complete all as specified & directed by Engr-in-Charge .
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rabbish off the premises complete.
Demolition of cement concrete (unreinforced)Concrete of any description and in any position not otherwise specifically provided for.
M&L for 100mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in floor finishes and pavings.
M&L for non Skid ceramic tiles 7 to 8mm thick coloured & joint free (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match
M& L for glazed coloured ,joint free ceramic tiles in vertical surface of size 450X350X7mm thick, laid over and including 10mm thick cement plaster in CM 1:4 as backing set and jointed in neat cement slurry and pointed in white or coloured cement to match
M& L for glazed coloured ,joint free ceramic tiles in vertical surface of size 300X200X7mm thick, laid over and including 10mm thick cement plaster in CM 1:4 as backing set and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L for light shed Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc. laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc.
M& L for for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) laid over and including 15mm thick screed bed in CM 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
S&F machine cut kota stone slab flooring 20-25 mm thick laid over and including 20 mm thick cement screed base 1: 6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by the Engineer-in-Charge.
M&L for mirror polishing on marble/ granite/ kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.
M&L for ATT along the external/enternal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron
M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors
Taking down door/window chowkhat or frame with shutters (without taking off shutters from the frame exc 1.5 sqm but nexc 4 sqm each.
Taking down door/window/ventilator's chowkhat or frame with shutters (without taking off shutters from the frame n.exc 1.5 sqm each.
S & F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete.
S & F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete.
S&F 2nd class 35 mm thick hardwood glazed and skelton shutters open rebated and prepared to receive glass / gauze etc ( with or without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 cluse 8.24(a) complete all as specified.
S&F factory made 2nd class hard wood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated all as specified.
S&F factory made solid panel coloured PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat mould plain coloured PVC'C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stills and plain colour PVC sheet for top rail lock and botton rail either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading. And jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing,
S&F solid coloured PVC doors & frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm MS square tube of 19 guage s&f in opening as per specification & drg in SSR 2004 Part II.
S&F 100 mm size butt hinges medium weight stainless steel complete all as spd & directed.
S&F 75 mm size butt hinges medium weight stainless steel complete all as spd & directed.
M&L for factory made PVC cupboard frame of size 75mmx40mm with 4 mm wall thickness made out of extruded 4 mm thick plain/prelam PVC sheet of density 600/cum manufactured by an ISO 9001-2015 certified company, reinforced with 15 mm x 15 mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 02 Nos of 150 mm long brackets of 10 mm x 10mm MS square tubes. The door frame shall be fixed to wall using 65/100 mm long MS screws to be provided for each vertical member and minimum of 02 Nos of screw to be provided horizontal member etc complete all as specified and directed.
M&L for factory made PVC flush type shutter of 18mm thickness consisting of panel of Hollow PVC profile of 12 mm thickness consisting of MS frame made out of MS tube of 16 gauge and size of 10 mmx 10mm metred all around the hollow profile section and lipped with 8 mm (4mmx2mm) thick and 12 mm wide on styles and rails using solvent cement. The inner panel shall consist of 4 mm plain/prelam PVC sheet of density 600 Kg/cum manufactured by an ISO 9001-2015 certified company on the front side and 2 mm plain/prelam PVC sheet using solvent cement on both side of the panel. The thickness of the shutter is edge lipped by 18 mm width x 1mm thick PVC sheet using solvent cement etc including necessary fittings, locking and fixing arranmgement ie piano hinges, locking and fixing arrangement etc complete all as specified and directed and as per manufacturer's specification and drawing
S&F door closer aliminium (die cast) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.
S&F powder coated aluminium frame for partitions,doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F aluminum powder coated door shutter, aluminium section weighing not less then 0.55 Kg/m incl necessary jointing cleats, glazing clips rubber neoprene packing incl (a) 150mm handle - 02 Nos (b) Stainless steel hinges - 100mm - 03 Nos (c) Mortice lock in built 3 lever-01 Nos in each shutter, alum anodized snap beading screw etc complete all as specified and as directed. Note: Glass & particle board shall be paid measured and separately.
S & F 4.8 mm thick tinted glass fixed to aluminum frame work with rubber beading gasket complete all as specified and directed.
S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed to aluminum framing all as specified and directed.
M&L powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section(two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified. Note: (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be incl in the above quoted rates and no extra shall be paid.
Taking down carefully the old U/S Aluminium point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, etc and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish complete.
M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through suitable concealed/surfaces PVC conduit and including replacement of modular sunken pressed steel terminal boxes 2mm thick of required size and modular white cover plate with all accessories including 1.5 sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete and making good to disturbed surface of walls including necessary touch up with adjoining surface of disturbed area i.e with OBD/colour work/white wash as existing finishes complete all as specified for the following and directed by Engr-in-Charge. Note :- 1. The Rate is inclusive cutting/chasing and making good distrubed surface with CM 1:3 and same surface finishes with the adjoining surface of distribed area with ODB/colour wash/white wash complete. 2. At roof slab where there is burnt/blockage in the existing conduit wiring will be done through PVC conduit and rate are inclusive in above quoted item.
For One light /fan/Bell point/security light controlled by one way switch
For One 3 pin socket outlet 5 amps on same board
For One 3 pin socket outlet 5 amps point independent board with cable 2.5 Sqmm for main current and 2.5 sqmm as earth wire as power point.
For One 3 pin socket outlet/sheet metal enclosuere with MCB SP of 20 Amp, an independent with cable 4 Sqmm for main current and 4 sqmm as earth wire as power point.
S&F Switch modular type, 1Module, 6 Amps one way complete all as specified and directed by Engineer in Charge.
S&F Socket outlet modular type 2M, 2/3 pin, 6 Amp complete all as specified and directed by Engineer in Charge.
S&F modular AC box with MCB 20 Amp complete with metal box and 3 Pin top plug complete all as specified and directed. Note : Rates are inclusive of cutting / chases for mounting metal box on wall and manking good to disturbed surfaces with OBD / Colour wash / white wash and wall putty where ever required.
S&F Socket outlet modular type 2M, 2/3 pin, 16 Amp complete all as specified and directed by Engineer in Charge.
S&F Switch modular type 1M, 16 Amp complete all as specified and directed by Engineer in Charge.
S&F electric bell ding dong AC, 230 volts single phase complete all as specified and directed by Engr -in-Charge.
S&F Bell push modular type 1M 5/6 Amp complete all as specified and directed by Engineer in Charge.
S&F Wall mounted LED Integrated Batten T5 20 Watt - 4Ft White, indoor decorative PVC extruded T5 LED battern-Integrated complete all as speficied and directed by Engr-in-Charge. Make Bajaj Cat Part No-BCLAB 20W WH LED P/ Crompton Cat Part No- LDL-20-CDL / Wipro Cat Part No-LL20-281-XXX-65AL1.
S&F Wall mounted LED Integrated Batten T5 10 Watt-2 Ft White, indoor decorative PVC extruded T5 LED battern -integrated type complete all as speficied and directed by Engr-in-Charge Make- Bajaj Cat Part No-BCLSB10 WH / Crompton Cat Part No-LCTLN-10-CDL / Havells Cat Part No-ENDURALINEARNEOBS10WLED865SPCWH.
S&F batten holder PVC insulated body complete all as specified and directed by Engr-in-charge
S&F LED lamp 12 Watt LED rechargeable Bulb complete all as specified and directed. Make of LED Bulb: Halonix/C&S//Syska/Crompton as approved)
S&F Electronic fan regulator, modular type 2M, 4 steps, complete all as specified and directed by Engineer in Charge.
Supply, installation, testing and commissioning 1200mm sweep BEE 5 star rated, ceiling fan with BLDC (Brushless Direct Current) motor, class of insulation : 100% rust free blade, 30 CM long down rod, 2 Nos canopies, shackle kit, safety repe, copper winding, power factor not less than 0.9, service valve (CMM/W) minium 6.85 air delivery not less than 220 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10% with electronic regulator unit for speed control and all remaining accessories including safety pin, nut, bolts, washers, temperature rise=75 degree C (Maximum) insulation resistance more than 2 mega Ohm, suitable for 230 V, 50Hz, single phase, AC supply complete all as specified and as directed including taking down old ceiling fan and depositing to MES store yard. (Make : Orient Model - Hector Remote/ OG (Energion Groove/Bajaj (Energos 26)
M&L for opening of hole through out the wall as suitable for exhaust fan of size 300mm sweep and fixing of nut-bolts with 4" anchor fastner of suitable size and making food the disturbed surface and all as per site requirement complete all as specified and directed by Engr-in-Charge. Note : The rates are inclusive in respect of under this item as above hole opening civil work with MS faster bolt of 8mm dia and 100mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan.
S&F steel body exhaust fan 300 mm sweep, 230 Volts with louver and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size and making good the disturbed surface of wall with OBD/White wash to match with including taking down old exhaust fan and depositing to MES store yard complete all as specified and directed by Engr-in-Charge.
S&F steel body exhaust fan 450 mm sweep, 230 Volts with louver and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size and making good the disturbed surface of wall with OBD/White wash to match with including taking down old exhaust fan and depositing to MES store yard complete all as specified and directed by Engr-in-Charge.
S&F in repairs Wall mounting 10 Watt LED decorative wall light fixture made up of Polycarbonate, with suitable with all connection all as specified and directed. Cat Part No PGR0301011 of Polycab or Cat Part No BULKHEAD 10W CDL of BAJAJ equivalent model in Crompton Greaves/Havells
S&F in repairs surface mounting round/Square shaped LED downlighter warm light with durable housing with Al heat shrink with diffuser to give glare free light 22W Watt LED 6000K/6500K lamp type on ceiling complete all as specified and directed.
S&F in repairs 10 LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE including all accessories connecting up twin core flexible copper conductor cable complete all as directed. Make- Havells Cat Part No – HEXAFT10WLED857SSYMBOPC / Crompton Cat Part No- LBHE-10-CDL / Wipro Cat Part No- WP1099
S&F ceiling rose surfaces bakelite minimum size 65x50mm with two/ three terminals complete all as specified and directed by Engr-in-Charge.
S&F water storage heater 25 ltr capacity, 5 Star rated , vertical type, glass line, AC, Single Phase electric, 230 Volt, complete with heating element, thermostat, 3 core lead, Plug top, safety valve, including electric and water connection with suitable nut, bolts & washers and making good to disturbed surface including taking down old geyser and depositing to MES store yard complete all as specified and directed by Engr-in-Charge.
S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked, stainless steel, suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and directed.
S&F in repairs Sheet metal enclosure of size 300 x 250 x 150 mm suitable for mounting single phase meter fabricated from CRCA sheet with anti corrosive dust and vermin proof. Note:- The meter cover shall have a transparent window. The window shall be of transparent, high grade UV stabilized engineering plastic for easy reading of all the displayed values/parameters and observation of operation indicator. The window shall preferably be an integral part of meter cover all as specified and directed
S&F in repairs AC single phase static energy meter of accuracy Class 1.0, 240 volts, 50 Hz with polycarbonate body and backlight LCD display of rating 10-60 Amps measure and display KWH, V, Current 1, KW, p.f. last month history of KWH, MD in KW with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box including taking down old metre and depositing to MES store yard complete all as specified and directed by Engr-in-Charge. (Note: Contractor will ensure that meter is working accurately to the satisfaction of Engr-in-Charge).
S&F in repairs sheet metal enclouser V TPN 4 way for MCCB 125 A, 4P incomer, double door DB, IP-54, bus bar, neutral link , earth bar and din rail complete all as specified and directed by Engr-in-Charge.
S&F in repairs MCCB 125 Amps, 4 pole, 415 Volts with 25kA including electrical connection with incomer with appropriate size of aluminium lugs and insulation packing complete all as specified and directed by Engr-in-Charge.
S&F MCB DB SPN 12 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having100 Amps rated bus bar complete all as specified and directed by Engr-in-Charge.
S&F in repairs MCB SPN 'B' curve 40 to 63 Amps 240 Volts , 10 KA complete all as specified and directed by Engr-in-Charge.
S&F in repairs MCB SP 'B' curve 06 to 32 Amps 240 Volts complete all as specified and directed by Engr-in-Charge.
S&F in repairs MCB SP 'B' curve 40 Amps 240 Volts complete all as specified and directed by Engr-in-Charge.
S&F in repairs LED Building security light fitting 40 Watt including fabrication of GI bracket 40mm dia suitable for fixing of LED light fitting duly fixed with clamps, nut, bolts, & washers etc and all as directed. Make – Crompton Cat Part No-LSTS-40-CDL-M / C Crompton cat part No-LSTS-40-CDL-M and Bajaj Cat Part No – BCLST30W LED
M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing as directed by Engr-in-Charge.
M&L in replacement submain wiring of two runs of 6 Sqmm size for main cable and one run of 6 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked , drawn PVC conceiled conduit of size 25mm dia with complete all as specified and directed by Engr-in-Charge. Note : The rates are inclusive of Cutting / chasing and making good to disturbed surface with CM 1: 3 and same surface finishes with the adjoining surface of disturbed area with OBD/Colour wash /white wash complete.
Supply ,laying and testing cable XLPE insulated screened PVC bedded ,galvanised steel strip armoured ,electric power cable (heavy duty ) 1100 volt grade with stranded aluminium conductor of size 50 sqmm ,3.5 core on wall and trenches complete including taking own of all existing cable all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth for laying cable etc and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.
M&L for sand filling under floors or in foundations including watering consolidation complete all as specified and directed by Engr-in-Charge.
Supply and laying bricks common burnt clay building sub class 'B' designation 75 complete all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layer not exc 25 cm thick complete all as specified and directed by Engr-in-Charge.
Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.
Supplying and laying including taking out G.I. tubing 50 mm hole light grade for encasing cables for mechanical protection , laid under plinth/ floors/ roads/ paths/ culverts or fixed on walls or concealed in walls or along the steel poles incl bends/clamps and all accessories complete all as specified.
Boring holes under road pavement by Bocky/Manually in any type of soil upto 50 mm bore dia complete all as specified and directed by Engr-in-Charge.
Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender
M/S Davinder Kumar
P R Constructions
HANUMAN BUILDERS
A N BUILDERS
M/S.M.S.Devi.Const.Co
The new hut furnitures
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .