SPL REPAIR TO BLDG NO P-1074 (SINGLE OFFR ACCN) AND P-1030 (BOUNDARY WALL OFFR MESS COMPLES) OF 53 ARMD REGT AT MILITARY STATION SRI GANGANAGAR

Amount

M&L for cutting or uprooting grass on old surface of roof and cleaning the roof surfaces thoroughly using wire brushes to remove sharp projections,cleaning joints,washing,drying and removing all dirt/dust to receive concrete padding/ plaster etc complete all as specified and directed by Engr In Chage.

M&L for rendering15 mm thick screed bed or bedding layer of cement mortar (1:4) with WPC , finished even and smooth without using extra cement complete all as specified and directed by Engr In Chage..

S&F 6mm thick Veneered decorative ply wood grade 1 (with BWR (resin) with decorative face veneers on one side and fixed on shuttter/board complete all as specified and directed by Engr In Chage.

M&L Round bar 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.

S&F aluminium grill for window and ventilator complete all as specified and directed by engr-In Charge.

S&F CP bottle trap 32 mm dia and necessay fittings complete all as specified and directed by engr-In Charge.

Demolition of cement concrete (unreinforced) any description and in any position for sunken portion (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below complete all as specified and directed by Engineer-in-Charge:- (a) applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface (b) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc. (c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:4:8 thickness 50mm over the coating as per requirment (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete all as specified and directed by Engineer-in-Charge.Make:- Dr. Fixit/Sika/STP Note: (i) PCC filling in sunken portion will be measured seperately.

M&L for PCC (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete or filling in sunken floor complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L 600x300 x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles and incliding 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge..

M&L Non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and incliding 15mm thick screed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M & L machine cut kota stone slab flooring 18-20mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm of screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M & L machine cut kota stone slabs as in vertical surfces such as risers of steps 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges including 10mm of backing coat in CM 1:4, complete all as specified and directed by Engineer-in-Charge.

M & L granite (of any type) work 16 to 20 mm thick (table rubbed and polished) in cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm of screed bed in CM 1:6.complete all as specified and directed by Engineer-in-Charge.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290(Grade-165). complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engineer-in-Charge.

M&L providing reinfoced cement concrete (nominal mix) in cement concrete 1:2:4 Type B1(20mm graded aggregate) as chajjas etc and similar work complete all as specified and directed by Engineer-in-Charge. (Note : The rate quoted shall be deemed to include use and waste of necessary form work)

M&L TMT bar 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.

Providing precast RCC Jallies ( cement concrete Type B0 1:2:4 12.5mm gragded aggregate) louvres and jallies, 40 mm thick (measured solid), including all mouldings & set in CM 1:4 and demolition complete all as specified and directed by Engineer-in-Charge..

Demolition concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) filling sub base as in floors, sub floor etc finished even and smooth all as specified and directed.

M&L 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded aggregate finished even and fair complete all as specified and directed by Engineer-in-Charge..

M&L for sand filling (25mm thick) under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

M&L Machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigment M-35 Grade 20mm graded stone aggregate) complete all as specified and directed by Engineer-in-Charge.

M&L for 30 cm x 30 cm x 25 mm thick chequered cement concrete tiles set jointed and pointed in neat cement slurry in floors with grey cement including 15mm thick screed in CM 1:6 with pigments complete all as specified and directed by Engineer-in-Charge.

M&L providing precast cement concrete in PCC (1:2:4) type B-1 with 20 mm graded aggregate for kerb stone and similar works with plain fair finishes including chamfers, weatherings, throat- ing etc. and setting in mortar (1:4) complete with joints to match complete all as specified and directed by Engineer-in-Charge.

M & L for 75mm thick cement concrete type C-1, 1:3:6 using 20mm graged aggregate as in plinth protection complete all as specified and directed by Engineer-in-Charge.

M & L for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graged aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar of any description complete all as specified and directed by Engineer-in-Charge..

M&L brickwork withsub class `B' Bricks (old size), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L brickwork withsub class `B' Bricks (old size), straight or curved on plan exc 6m mean radius, built in CM 1:6 but excpet bricks complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete complete all as specified and directed by Engineer-in-Charge..

M&L 15mm thick rendering in CM 1:6 to brick/ concrete wall surfaces finished even & smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge. .

M&L 15mm thick rendering in CM 1:4 to brick/ concrete wall surfaces finished even & smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge..

M&L, 5mm thick rendering in CM 1:3 on fair faces of concrete surfaces as on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L three coats of oil emulsion distemper over chalk whiting on newly plastered wall surfaces including preparation of surface with putty finishes complete all as specified and directed by Engineer-in-Charge.

M&L three coat exterior acrylic apex weather paint over a primer / white wash in new surfaces of walls including preparation of surfaces with putty finishes complete all as specified and directed by Engineer-in-Charge.

M&L three coats of white wash to new surfaces on ceilings including preparation of surface with putty finishes complete all as specified and directed by Engineer-in-Charge.

M&L three coat exterior acrylic apex weather paint over a primer / white wash in new surfaces of walls including preparation of surfaces with putty finishes complete all as specified and directed by Engineer-in-Charge.

M&L three coats of oil distempering over old decorated surfaces of wall after complete removal of existing treatment including preparation of surface complete with putty finishes incl chalk whites complete all as specified and directed by Engineer-in-Charge..

M&L three coats of white wash to old surfaces on ceilings including preparation of surface with putty finishes complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed by Engineer-in-Charge..

Taking down chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down steel window / ventilators complete all as specified and directed by Engineer-in-Charge..

Taking down shutters of any description exc 1 Sqm but n exc 2 sqm each and refixing in same opening after resecuring easing etc complete all as specified and directed by Engineer-in-Charge..

M&L pressed steel frame for doors size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge.

M&L providing cement concrete (1:3:6) type C1 for filling in pressed steel frames and other similar items etc complete all as specified and directed by Engineer-in-Charge.

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification and shall be filled with suitable wooden block in all the three legs. the frame shall be covered with fiberglass from all sides. M S stay shall be provided at the bottom to steady the frame complete all as specified and directed by Engineer-in-Charge..

S&F Factory Made Solid PVC Moulded Door Shutter With Particle Board Co, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and directed by Engineer-in-Charge.

S&F 100mm long butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed by Engineer-in-Charge..

S&F aluminium handle cast type anodised, 150mm long complete all as specified and directed by Engineer-in-Charge.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed by Engineer-in-Charge.

S&F aluminium Floor Door springs including necessary fittings complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and directed by Engineer-in-Charge..

Supply & Fix 4mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in suqares n.exc 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

M&L anodised aluminium frames for doors, windows with one or moe rebates including jointing cleats for fixing etc.including power coating minimum thickness of power coating shall be 50 micron as per the specification) complete all as specified.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,powder coated aluminum snap beading screws etc. complete all as specified and directed by Engineer-in-Charge.

S&F powder coated aluminium windows and ventilator shutters, side hung type, without sash bars aluminium saction weighing 0.55 kg/RM including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) complete all as specified and directed by Engineer-in-Charge.

M&L one coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed by Engineer-in-Charge.

M&L two coats of synthetic enamel paint over a coat of pink primer on new surfaces of wooden and wood based materials over 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.complete.

M&L one coat of synthetic enamel paint on old painted surfaces of steel and iron work over 10 cm width or girth including preparation complete all as specified and directed by Engineer-in-Charge.

M&L, two coats of synthetic enamel paint over a coat of red oxide on steel surface over 10 cm width or girth, not otherwise described including preparation of new surface.

Suuply and fix in repairs vitreous china wash hand basin white corner type of size 400mm X 400mm, fixed with a set of cast iron brackets including cutting and pinning in ends of brackets to wall, 32mm dia brass chromium plated waste fittings 600mm long PVC connection of 15mm size with PTMT nuts and 40mm dia waste pipe including 15mm dia brass CP mixer for mixing hot & cold complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white complete, including white seat cover with hinging arrangement, Flush jet (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed by Engineer-in-Charge. Make:- Hindware, Parryware, Cera

S&F in repair, 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern(dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket complete all as specified and directed by Engineer-in-Charge..

S&F in repair soap dish, vitreous china white complete all as specified and directed by Engineer-in-Charge.

S & F in repair 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by Engineer-in-Charge. Make:- prayag cat No-8326,parryware Cat No-T35011A1,CERA Cat No-F33002361.

Supply and fix in repairs Angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by Engineer-in-Charge.

S&F in repairs15mm bib taps cast copper alloy, chromium plated fency type with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed by Engineer-in-Charge.

S&F CP gratings 100 mm dia of PTMT fixed in repairs.(Minimum weight 25 gms ) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP shower rose 125mm size and 15mm dia complete all as specified and directed by Engineer-in-Charge..

S&F in repairs CP towel rail 600mm long fixed with CP brass screws complete all as specified and directed by Engineer-in-Charge..

Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all as specified and directed by Engineer-in-Charge.

Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed by Engineer-in-Charge.

S & F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed by Engineer-in-Charge.

Fixing only tubes, of 15mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge.

S & F GI steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

Fixing only tubes, of 20 mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge.

Dismantling water tanks any type exc. 500 ltr but nexc 1000 ltr complete all as specified and directed by Engineer-in-Charge..

S & F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (500 Ltrs) capacity complete all as specified and directed by Engineer-in-Charge..

Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 20mm complete all as specified and directed by Engineer-in-Charge..

Dismantling of cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engineer-in-Charge..

M&L for 100mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed by Engineer-in-Charge.

M&L for 100mm dia cast iron Bends complete all as specified and directed by Engineer-in-Charge. .

M&L for 75mm dia cast iron Bends complete all as specified and directed by Engineer-in-Charge..

M&L for 100mm dia cast iron Branch pieces single complete all as specified and directed by Engineer-in-Charge..

M&L for 75mm dia cast iron Branch pieces single complete all as specified and directed by Engineer-in-Charge..

M&L for 100mm dia cast iron Sockets complete all as specified and directed by Engineer-in-Charge..

M&L for 75mm dia cast iron Sockets complete all as specified and directed by Engineer-in-Charge..

Taking down eaves gutters and rainwater pipes,PVC (SWR) pipes ( any size or pattern ) including all fittings heads ,shoes, bends, and removal to store complete all as specified and directed by Engineer-in-Charge..

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary scaffolding upto the height of building from ground level complete all as specified and directed by Engineer-in-Charge. .

Supply and fixing drapery curtain rod 25mm dia, fancy type, fabricated out of stainless steel steel sheet not less than 20 guage, including brackets and pair of decorated end knobs (finials), stop roller etc, pretreated powder coated natural color complete all as specified & directed by Engineer-in- charge.

S & F in 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F corner glass shelve for complete all as specified and directed bt Engr-in-Charge.

S & F in repair brass mortice lock, vertical type, size 100 mm and 4 lever type complete all as specified and directed by Engineer-in-Charge.

S&F in repair door closer hydraulically regulated, alunimiun body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed by Engineer-in-Charge.

S&F glass shelve 18" x 5 1/2" for complete all as specified and directed bt Engr-in-Charge.

M&L two coats of cement based paint over white wash in new surfaces of walls with putty finishes including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L two coat of cement base paint to old surfaces of walls with putty finishes including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for TMT bars 5mm dia and over upto and including 8mm dia as in stirrups/spacers, cut to length, bent to shape required including bending, cranking spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in- charge.

Use & waste of form work to sides & soffits of floor or roof beams as for fair finished surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced Cement concrete (design mix) M-25 using 20mm graded aggregate in foundations, footings,plinth beams etc complete all as specified and directed by Engineer-in-Charge..

M & L for cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5 metre clear span, cills, steps, siesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings bed block,roof kerbs or mud stops, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throatings etc. complete all as specified and directed by Engineer-in-Charge.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, of forged into spikes, framed guard bars, barred iron doors ladders, framed baluster, walk ways, railings, framework, walk ways, railings , framedwork of water tanks and similar work conforming to Fe 290Gde E-165 complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in - Charge.

M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for modular metal flush boxes suitable length and thickness for mounting, switches, sockets,fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.(Make of cable -Havells/Anchor/Finolax/Gloster and conduit pipe:-AKG/Plaza/Suprem)

All as per Srl item No -118 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No -118 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 118 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge.

All as Srl item No. 118 here in before but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 118 here in before but for call bell point complete all as specified and directed by Engineer - in - Charge.

S & F modular switch 5/6 Amps single pole one way,one module with White cover plate with frame, alongwith metal flush box 1/2 module complete all as specified and directed by Engineer - in - Charge.

S & F modular switch 5/6 Amps single pole two ways ,one module with White cover plate with frame, alongwith metal flush box 1/2 module complete all as specified and directed by Engineer – in - Charge.

S & F modular switch socket combination 5 pin, type 5/6 Amps5 in 1 flush type with White cover plate with frame, 3 module alongwith Metal flush box 3 module complete all as specified and directed by Engineer - in - Charge.

S & F modular switch socket combination 6 Pin, 5/16 Amps flush type with White cover plate with frame, 3 module alongwith Metal flush box 3 module complete all as specified and directed by Engineer - in - Charge.

S & F modular socket outlet 5 pin 5 Amps flush type with White cover plate with frame, 2 module alongwith Metal flush box 2 module complete all as specified and directed by Engineer - in - Charge.

S&F modular bell push 5 Amp, one module with White cover plate with frame, alongwith metal flush box 1/2 module complete all as specified and directed by Engineer – in - Charge.

S & F modular stepped type, fan regulator not less than 120 watt for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge

S&F Electronic bell AC 230 Volt single pole ding dong type complete all as specified and directed by Engineer - in - Charge.

S & F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.

S&F in replacement MCB protected Socket -25Amps in renewal with plastic box and plug top vertical din rail mount type suitable to operate at 240V current rating range 25A , 50Hz 1Ph, complied IS specification 13032 & 8623 complete all as Spd and directed by Engineer in Charge Make-Havells/Crabtree/HPL

Supply and fix Industrial socket metal clad plug and socket with MCBs single pole 20 Amp complte all as specified and directed by Engineer - in - Charge.

S & F of T/L Fitting LED batten with aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge. Make:Havells cat part No: LUMILINEPLUSBS20WLED865SPCSS, Bajaj cat part no.: BCLSBAL 20W CW ,Crompton cat part no. : CCS-100-20-65-HL2-DP-NWH)

S&F security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge (Make:Havells cat part no: ENDURAPEARLSL25WLED757SASYTOPCMP, Bajaj cat part no. BRLEP 25W LED WH, Crompton cat part no. LSTS-25-CDL-M)

S & F Water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery ,glass well,and including 10 watt LED lamp all as specified and directed by Engineer - in - Charge Make:Havells cat part no : HEXAFT10WLED857SSYMBOPC, Bajaj cat part no. BIBWP 10W LED, Crompton cat part no. LBHP-10-CDL)

S & F angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.

S&F LED lamp 9W for angle holder complete all as specified and directed by Engineer - in - Charge.

S&F in decorative wall light SS finish fixture with textured glass diffuser suitable for 40 W mini GLS lamp complete all as specified and directed by Engineer - in - Charge

S & F in repair compact & decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified.

S & F in replacement LED Bedside Light (White,3000k) 3 Watt, with flexible arm suitable for reading complete all as specified and directed by Engineer - in - Charge.

S & F of sub-main wiring with two single core cables PVC insulated and un-sheathed 4 sqmm (Nominal Area) FR/FRLS stranded copper conductor drawn in and including steel dia 25mm “medium quality” conduit including 2.5 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge.

S & F of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FR/FRLS stranded copper conductor drawn in and including steel dia 25mm “medium quality” conduit including 4.00 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge.

S&F in repairs Sheet metal enclouser for doble door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 4 Way 415 Volt ISI marked 250Amps busbar stove enameled dust and vermin proof,IP:43 protection suitable for incorporation FP MCCB(V-Tech) N1 Frame upto 125A ,Isolators and including give connection with wire and cable etc complete all as specified and directedby engineer -in-charge (Make - Indo Asian/Havells / Legrand)

S&F in repairs MCCB TP&N 63 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge. (Make -Indo Asian/Havells / Legrand)

S & F sheet metal enclosure for double door BDs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge. (Make - Havells / Legrand / Indo Asian)

S & F MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. (Make - Havells / Legrand / Indo Asian)

S & F MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. (Make - Havells / Legrand / Indo Asian)

M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point all as specified and directed by Engr -In - Charge

Excavation in trenches not exceeding 1.5 mtr wide and not ecxceedinf 1.5 mtr depth for laying of cables including taking up or down the LT cable complete all as specified and directed by Engineer - in - Charge

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm complete all as specified and directed by Engineer - in - Charge

Removal of Excavated material n exceeding 50 mtr and depositing where directed complete all as specified and directed by Engineer - in - Charge

Supply and filling in Sand for Cable protection complete all as specified and directed by Engineer - in - Charge

Supply and lay standard size bricks subclass B type complete all as specified and directed by Engineer - in - Charge

Supply and lay jointing and testing and commissioning in replacement of 25 Sqmmx4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge.

Supply & fixing in replacement of meter box of size (0.9mX0.9mX0.2m) , made out of CRCA mild steel sheet, thickeness 2.25 mm double door,single opening with lock arrangement and transparent glass for meter reading suitable for fixing 04 Electric meter & VTPN DB box including taking down existing electric meters , refixing them with two single core PVC copper conductor unsheathed wire multistranded 4 sqmm,properly painting on meter box complete and fixing in wall with suitable cutting,cement work etc all as specified and directed by engr in Charge

S&F 3 pin telephone socket RJ-11 with metal flush box having holes for 20mm conduit entry for telephone connection all as specified and directed by Engr-in-Charge. Make : Havells/Legrand/ABB

S&F RJ-45 data socket for connection of data network all as specifed and directed by Engr-in-Charge.

S&F rigid non metaliic PVC conduit 20mm dia inclusive of all tees, bends , elbows ,reducers , bell mouth tube ends and complete with all fixing accessories such as couplers , lock nuts, saddles, pipe hooks etc all as specified and directed by Engr-in-Charge.

Supply and fix PVC body Exhaust fan 300mm sweep complete with frame , louvers, nuts bolts etc all as direceted.by Engineer - in - Charge.

Supply, installation, commissioning and testing water storage heater metal body vertical type of capacity 25 Liters suitable for to operate/function on AC 220V, single phase having heating element of 2KW capacity and high thermal cut-out BEE approved 5 Star rated includinguidng fixed along walls with all fixing material required at site and electric connections with copper cable 3 core and plug top 15A includinguding making good to disturbed surface complete all as specified and directrd by Engineer in charge.

Note : Notes : (i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

PAREEK AND COMPANY

J and P CONTRACTOR

KHANNA CONSTRUCTIONS

AYUSH BUILDERS

Aggarwal brothers and company

M/s Durga Constructions Company