Construction of 33-11 KV Sub-station Ganeshera and associated 33-11 KV Lines in Dist. Mathura

Amount

SUB-STATION PART:- 33 KV Line Isolator.

33 KV Bus Isolator.

33 KV Lightening Arrestors

33/11 KV Transformer 5 MVA

33 KV VCB 800A, 750MVA with Steel structure

Control panel I/C for 33 KV single T/F

Control panel I/C for 33 KV double T/F

33 KV CT 400/200/1-1A

33 KV CT 200/100/1-1A

33 KV 1 Ph PT 33 KV/110 V

11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C

(ii) Outgoing VCB 200/100/5A, 350MVA

(iii) Bus coupler 350 MVA

11KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm

(ii) 3 × 185 Sq.mm

11KV Cable jointing kit. Heat Shrinkable:- (i) 300 Sq.mm Indoor

(ii) 300 Sq.mm Outdoor

(iii) 185 Sq.mm. Indoor

(iv) 185 Sq.mm. Outdoor

11/0.4 KV, 63 KVA Transformer.

PCC Pole 8.5 mtr. Long for Switch yard Lightening

33 KV Terminal Gantry with Plinth & Foundation as per RESSPO Schedule

Main Bus Bar complete with Structure. Plinth & Foundation as per RESSPO Schedule

Structure for Line & Bus Isolator. with Plinth & Foundation

33 KV Post Insulator

Structure for Post Insulator with Plinth & Foundation

Structure for Lightening Arrestors with Plinth & Foundation

90 Lbs. Rail pieces for T/F

CT Steel structure with Plinth & Foundation

Structure for P T with Plinth & Foundation

33 KV Fuse Set

Structure for fuse Set with Plinth & Foundation

24 V Battery with Battery Charger and Cabinet.

Control cable:- (i) 4 × 2.5 Sq.mm.

(ii) 2 × 2.5 Sq.mm.

L.T. Cable Al. 3.5 × 70 Sq.mm .

Earthing of Sub-Station:-(As per RESSPO Schedule) (i) Outdoor Equipment (Earth Mat)

(ii) Indoor Equipment (Earth Mat)

Water level Pipe Earthing for Power T/F

Chemical Pipe Earthing

Alluminium Paint for painting of Sub-Station Structure & equipment.

Red Oxide Paint for painting of Sub-Station Structure & equipment.

Plinth of 5 MVA T/F with Transformer Cable Stand made by G.I. 65x65x6 mm 3.00 Mtr. Long angle with use of flat 50x6 mm piecees and 100x50x6 mm L-shape channel for Power Transformer nutral earthing

Plinth & Foundation of 33 KV VCB

11 KV Cable laying Including cost of sand and Bricks

Furniture for control room (Office Chair-2 no ,Office Table -2 No. Sitting branch-1 no. (made of steel) Stool -2 no.(made of steel) Office rack-1 no (made of steel) Fire Fighting equipment with stand complete. Fire extinguisher CO2 type 5.0 Kg no-1 ,Fire extinguisher CO2 type 4.5 Kg. no-1, I.S.I. mark. ,Fire Bucket stand size 1500x1200mm.-no-1, Fire bucket made of B.P. sheet 20 gage ( conical shape ) having capacity 10 Ltr.- 10” dia -4 no., Chakkered rubbur sheet 2000x1000x10 mm. I.S.I. mark.-no-4 Boards OF S/S making and fixing of protection Board alongwith all accessories complete made of sunmica 10 mm sheet size 45×60 Cm.-no-2 ,Supply and fixing of sub-station name board made of M.S. Angle 50×50×6 mm and S.P. Sheet of 18 SWG including painting and writing.-no-1

SWITCH YARD LIGHTING ARRANGMENT stone Pade -6 No Cu. PVC Cable 2x4 SQMM -200 Mtr PVC Conduct Pipe -15 mm- 150 Mtr D.P.Switch 63 A for one way control-01 No. Rest for DI Board, D.P. Switch 32A-1, D.P. Switch 16 A-1, Kit Kets-6 including wiring.-1 Job LED Light 100 W -6 No.(ISI Mark)

33 KV LINE PART:- 33 KV XLPE Cable 3 x 300 Sq mm

33 KV Heat Shrinkable cable boxes for 33 KV Cable XLPE 3 x 300 Sq mm

33 KV Pin Insulator

33 KV Pin with nut

Disc Insulators B&S Type 7000 Kg.

Disc Fittings for Dog/Raccoon 7000 Kg.

Errection of Stay Set Complete (G.I STAY ROD , 20X1800 MM ,STAY WIRE 7/8 SWG, STAY CLAMP,BOLT NUT & WARSHER)

Grouting of stay rods 1800 x 20 mm. including all works of excavation, fixing, tightening & nozzling of stay with the poles and of required tension as per relevant drawing including back filling of earth and proper ramming.

A.C.S.R. DOG CONDUCTOR

P.G. Clamp for Dog Conductor

‘E’ Bracket for 33 KV

M.S. Angle 65x65x6x3010 mm.x 2 Nos. = 6.020 Mtr. @ 5.8 Kg./M = 34.916 Kg.

M.S. Angle holding clamp with nuts and bolts

Eye Bolts

G.I. wire 6 SWG

G.I. wire 8 SWG

Binding wire

Turn Buckle

MS Channel 125x65x1300 mm T-Off

G.I. M + 6 TOWER 19.300 Mtr. Long

G.I. pipe 160 mm Double Pole Structure

Clamps for fixing of Cable and Cable Box

Clamps for holding of G.I. pipe 160 mm

Cable Marker

Wooden Bushes

33 KV Cable Under Ground Work :- Digging of Trench by excavation of earth laying of brick to cover the cable and filling of sand & earth ramming and dressing properly with complete job for laying 33 KV XLPE cables in loop of sizes 3x300 Sq.mm. including cost of bricks, sand, clamps etc.

Laying of 33 KV, 3x300 sq.mm. XLPE Cable underground in trunches.

Laying of 33 KV, 3x300 XLPE Cable in G.I. Pipe on Double Pole Structure

Laying of 33 KV, 3x300 XLPE Cable in Air on Double Pole Structure

33 KV ACSR Dog conductor Dismentaling and Re-sagging

Dismentaling of S.T. Pole and Dump to Center Store Mathura

11 KV LINE PART:- 11 Mtr. long S.T.P., SP-70 Pole.

13 Mtr. long S.T.P., SP-70 Pole.

‘V’ Type Cross Arm for 11 KV

11 KV XLPE Cable 3 x 185 Sq mm

11 KV Heat Shrinkable cable boxes for 11 KV Cable XLPE 3 x 185 Sq mm

11 KV Pin Insulator

11 KV Pin with N&B

Earthing complete

11 KV Disc Insulators T&C Type 4500 Kg.

11 KV Disc fittings T&C Type 4500 Kg.

Stay set Complete for 11 KV line

Grouting of stay rods 1800 x 20 mm. including all works of excavation, fixing, tightening & nozzling of stay with the poles and of required tension as per relevant drawing including back filling of earth and proper ramming.

A.C.S.R. DOG CONDUCTOR

11 KV Lightning arrestor

Earthing Complete for Sub-Station D/P

Stone Pad 300x300x75 mm

Cross Arm Holding Clamp with packing piece, Nut & Bolts for PCC Pole

Barbed wire

The Grouting and making of plinth of the support (1/6 of the full length of the supports) will be done as per norms in the CC 1:4:8 with cement, course sand and brick ballast including back filling and proper ramming.fixing of all clamps and other accessories as per relevant drawing. ii) 11 Mtr. Long SP-55 poles

iii) 13 Mtr. Long SP-72 poles

Alluminium Binding wire ( 5 mm dia )

Painting number mark with Paint

11 KV Danger Board with clamp & bolts

Alluminium Paint

Red Oxide

M.S. Angle 65x65x6x2700 mm Bracing Set with 4 Nos.Clamps.

Top Channel 100x50x2240 mm.

Top Channel 100x50x6 mm 2240 mm.

Top Channel 125x65x2240 mm.

Clamps for Top Channel with Nut & Bolts

P.G. Clamp for Weasel Conductor

‘E’ Bracket for 11 KV with Nut & Bolts

T' OFF M.S. Channel 100 x 50 x 1300 mm. ( 1.3 m @ 9.56 M / Kg. = 12.428 Kg. )

M.S. Angle 50x50x6 1500 mm for Top Channel Support on Tower

M.S. Angle 65x65x6x3010 mm.x 2 Nos. = 6.020 Mtr. @ 5.8 Kg./M = 34.916 Kg.

M.S. Angle holding clamp with nuts and bolts

Eye Bolts

G.I. wire 6 SWG

G.I. wire 8 SWG

Turn Buckle

Connecting Clamps

G.I. M + 6 TOWER 19.300 Mtr. Long ( Tower)

M.S. Nut & Bolt with Warshers

Dropper Channel 100×50×2028 mm

M.S. Angle 65x65x6 mm,2028 mm. long for G.I. Pipe supporting @ 5.8 Kg/M

11KV TPMO Set. with fixing clamp complete

11 KV Fuse Set with Fixing clamp complete

Copper L-Piece of size 400x50x6 mm for LT bushing Rod of transformer

LT Aluminium insulated Cable of size 1x16 Sq.mm. (for HT jumpering)

Al. crimping lugs:- Al. crimping lugs 35 sq.mm.

Al. crimping lugs 50 sq mm.

Al. crimping lugs 70 sq.mm.

SMC MCCB Distribution board (1 No. I/C & 3 No. O/G)

HDPE Pipe 160 mm O/D PN-6, PE-100 Grade UV Stabalized for laying at Double Pole Structure to proposed Double Pole Structure

Cable Marker

Wooden Bushes

G.I. Pipe 160 mm Dia for Double Pole Structure

Clamps for Fixing Cable & Cable Box

Clamps for holding of G.I. Pipe 160 mm

11 KV Cable Under Ground Work :- Digging of Trench by excavation of earth laying of brick to cover the cable and filling of sand & earth ramming and dressing properly with complete job for laying 11 KV XLPE cables in loop of sizes 3x185 Sq.mm. including cost of bricks, sand, clamps etc.

Digging of Trench by excavation of earth laying of HDPE pipe for 11KV 3X185 sqmm XLPE cable

Laying of H.D.P.E. Pipe underground minimum 2.5 Meters below by HDD Method along with laying of 11 KV 3x185 Sq. mm. XLPE Cable in H.D.P.E. Pipe

Laying of H.D.P.E. Pipe underground minimum 1.5 Meters below by open trench method anong with laying of 11 KV, 3x185 Sq. mm. XLPE Cable in H.D.P.E. Pipe

Laying of 11 KV, 3x185 sq.mm. XLPE Cable underground in trunches including cost of bricks, & sand,.

Laying of 11 KV 3x185 XLPE Cable in G.I. Pipe on Double Pole Structure

Laying of 11 KV 3x185 XLPE Cable in Air on Double Pole Structure

Choping of branches of Tree

Road restoration charges for pucca road crossing

Road restoration charges for Kachhcha / footpath side

11 KV ACSR Dog Conductor Dismentaling and Re-sagging

Carriage of following material from Center Store to Site SUB-STATION PART:- 33 KV Line Isolator.

33 KV Bus Isolator.

33 KV Lightening Arrestors

33/11 KV Transformer 5 MVA

33 KV VCB 800A, 750MVA with Steel structure

Control panel I/C for 33 KV single T/F

Control panel I/C for 33 KV double T/F

33 KV CT 400/200/1-1A

33 KV CT 200/100/1-1A

33 KV 1 Ph PT 33 KV/110 V

11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C

(ii) Outgoing VCB 200/100/5A, 350MVA

(iii) Bus coupler 350 MVA

11KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm

(ii) 3 × 185 Sq.mm

11KV Cable jointing kit. Heat Shrinkable:- (i) 300 Sq.mm Indoor

(ii) 300 Sq.mm Outdoor

(iii) 185 Sq.mm. Indoor

(iv) 185 Sq.mm. Outdoor

11/0.4 KV, 63 KVA Transformer.

PCC Pole 8.5 mtr. Long for Switch yard Lightening

33 KV LINE PART:- 33 KV XLPE Cable 3 x 300 Sq mm

33 KV Heat Shrinkable cable boxes for 33 KV Cable XLPE 3 x 300 Sq mm

11 KV LINE PART:- 11 Mtr. long S.T.P., SP-70 Pole.

13 Mtr. long S.T.P., SP-70 Pole.

‘V’ Type Cross Arm for 11 KV

11 KV XLPE Cable 3 x 185 Sq mm

11KV Heat Shrinkable cable boxes for 11 KV Cable XLPE 3 x 185 Sq mm

M/S AARADHYA AND ADHYATM ASSOCIATES