REPAIR /MAINT OF LT PANELS AND ALLIED WORKS IN DOMESTIC AREA AT AF STATION KANPUR.

Amount

S & F in replacement of MCCB, thermal magnetic protection type of 630 Amps ,36 KA, 4 Pole, 415V , Ics=100%Icu, fixed with and including lugs, nuts, bolts, washers, spacers, studs, links etc. testing and commissioning complete all as specified and directed.Make MCCB :- Legrand / L&T / ABB / C&S as approved by GE

All as per Item No. 1 above but MCCB of rating 400 Amps 36 KA, 4 Pole, 415V

All as per Item No. 1 above but MCCB of rating 250 Amps 36 KA, 4 Pole, 415V

All as per Item No. 1 above but MCCB of rating 200 Amps 36 KA, 4 Pole, 415V

All as per Item No. 1 above but MCCB of rating 160 Amps 25 KA, 4 Pole, 415V

All as per Item No. 1 above but MCCB of rating 125 Amps 25 KA, 4 Pole, 415V

All as per Item No. 1 above but MCCB of rating 100 Amps 25 KA, 4 Pole, 415V

All as per Item No. 1 above but MCCB of rating 63 Amps 25 KA, 4 Pole, 415V

M & L for cleaning and servicing of ACBs of any make with rating 630-1600 Amps, 50 KA, 4 Pole, 415V including lugs, nuts, bolts, washers, spacers, studs, links etc. testing and commissioning complete all as specified and directed.

All as per Item No. 9 above but of rating 2000 - 4000 Amps, 50/60/75/85 KA complete all as specified.

S & F in replacement of ACB, 1600 Amps, 50 KA, 4 Pole, 415V, drawout type , microprocessor based , including including suitable lugs, nuts, bolts, washers, spacers, studs, links etc. testing and commissioning complete all as specified and directed.Make of ACB :- L&T / Legrand / ABB / Siemens / Schneider / C&S / Crompton Greaves /GE as approved by GE

All as per Item No. 11 above but ACB of rating 1250 Amps, 50KA.

M & L in replacement for new steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screws ,type 410 SP-31 ( 9 mtr height) complete including providing two coats of alumnium paint over a coat of red oxide primer and marking pole number with Black Paint as directed by Engineer in Charge all as specified and directed. Note: Excavation, earth work, concrete shall be measured & paid seperately and pole number also be entered in MB.

M & L for plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foundation , filling and mass concrete complete all as specified & directed by Engineer in Charge.

M & L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping of pole complete all as specified & directed by Engineer in Charge.

S & F in replacement for automatic street light switch using astronomical digital timer alongwith suitable power cotactors and MCBs (Input-Output) should be enclosed in pole/wall mountable enclosure made of rust proof, electric shock proof, termite proof and FR grade thermoplastic polycabonate enclosure conforming to IP-54 protection suitable for 3 phase load of minimum 8Kw, MCB (SP) rating 32 Amps (3 Nos) complete all as specified and directed. Make: - Kakatiya Energy System Pvt Ltd / Bajaj / Havels / Healer as approved by GE

S & F in replacement junction box (225 x 295 x 122 mm) comprising two / four Nos aluminium bus bars of suitable size mounted on epoxy insulators with holes for incoming and outgoing cables, cable gland suitable for pole mounted outdoor type having IP-65 protection complete with FI clamp 40 x 4mm with nuts, bolts & washers including provision for inserting copper cable wires complete all as specified and directed. Make:-Sintex / Rittal / Hensel as approved by GE.

S & F in replacement of energy saving & enviroment friendly LED street light fittings made out of pressure die cast anodized alluminium housing having rating 60 watt with high efficiency polycarbonate UV stablized cover with integrated lens to ensure asymmetrical light and overall IP 65 protection complete all as specified and directed. Cat Part No. BRTFG 60W LED V3 WW of Bajaj or equivalent model in Philips / Havells / Wipro / Orient Electric as approved by GE

All as per Item No. 18 above but of rating 90 wat complete, Cat Part No. BRTFG 90W LED I WW of Bajaj or equivalent model in Philips / Havells / Wipro / Orient Electric as approved by GE.

S & F in replacement of rating 100-110 watt LED flood light with high luminus efficiency, protected to IP 65 with front toughened glass, with all necessary accessories required effective range including necessary mounting arrangement such as flat iron clamps, nuts, bolts & washers etc complete all as specified and directed. Cat Part No. BJFL 100W LED I of Bajaj or equivalent model in Philips / Havells / Wipro / Orient Electric as approved by GE.

All as per Item No. 20 above but of rating 120 watt. Cat Part No. BJFL 120W LED I of Bajaj or equivalent model in Philips / Havells / Wipro / Orient Electric as approved by GE.

S & F in replacement LED flare highbay of rating upto 150 watt light senergy saving, environment friendly & robust, IP 65 protected suitable for ceiling suspended type for better illumination and working environment complete all as specified and directed. Cat Part No. BGHBM 150W LED XE of Bajaj or equivalent model in Philips / Havells / Wipro / Orient Electric as approved by GE.

Surface dressing 15 cm deep and getting out including cleaning away all grass vegetation saplings, brush wood under grouting, roots & tree and not exceeding 30 cm girth and removing rubbish to a distance of 50 mtr outside the periphery of area complete all as specified and directed.

Repair / Maintenance of LT Panel board by taking shut down, removing of carbon particles, rubbing of heated portion of bus bar and cleaning complete by means of CRC-226 / Petrol tightening of all joints in bus bar, checking of earth and neutral voltage, removal of foreign objects, replacement of u/s nuts / bolts / washers including replacement of corroded glands, lugs, thimbles, hinges, doors locks, door knobs, gaskets etc. and tightening them properly complete all as specified and directed.

S & F in replacement of On Load Change Over on wall / Panel 415 Volts 400 Amps capacity, 4 pole with sheet steel enclosure complete all as specified and directed. Make - L&T / Havells / Schneider / ABB / C&S

All as per Item No. 25 above but of rating 200 Amps.

All as per Item No. 25 above but of rating 100 Amps.

S & F in replacement MCB SP 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed. Make : Legrand / Indo Asian / L&T / Schneider / Havells / C&S

All as per Item No. 28 above but SPN of rating 16-32 Amps

All as per Item No. 28 above but TPN of rating 40-63 Amps

M&L for cutting of PCC/Hardstanding/WBM road not exceeding 45 cm in width and not exceeding 90 cm in depth for passing of cable and making good disturbed surface to match with the existing surface complete all as directed by Engineer in Charge

Supply, laying, in trenches/ floor or fixed to pole / wall 50mm bore GI light grade pipe with fittings as protection of cable complete including taking down old pipe all as directed by Engineer in Charge.

Repair & Maintenance of 60 - 90 watt LED street light / security light driver of existing make and size with suitable electronic circuit. The driver should be 140 V to 270 V universal driver with built in surge protection complete all as specified and directed.

All as per Item No. 33 above but 100 - 120 Watt.

M & L in replacement for earthing complete with GI earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly to ground vertically to a depth not less than 2.25 Mtr below the ground level with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to GI strip 32 x 6 mm size as earthing lead sorounded with 40mm dia GI light grade pipe and including 15mm bore GI tubing light grade as watering pipe of suitable depth, filling around with charcoal dust and salt including excavation, returning, filling of earth and disposal of surplus soil to a distance not exceeding 50 mtr and connected to GI strip by means of GI nuts, bolts and washers strip connected to earth plate including chamber PCC (1:3:6) type C1, using 20mm graded stone aggregate alongwith lifting handle complete all as specified in electrcial plate no. 3 of SSR Part-I all as directed. (Note:-GI strip upto 7.5 m length in included in unit rate quoted by contractor).

M & L in replacement for earthing complete with Copper earth plate electrode of size 600 mm x 600 mm x 3.15 mm thick buried directly to ground vertically to a depth not less than 2.25 Mtr below the ground level with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to Copper strip 20 x 3 mm size as earthing lead filling around with charcoal dust and salt including excavation, returning, filling of earth and disposal of surplus soil to a distance not exceeding 50 mtr and connected to Copper strip by means of Copper nuts, bolts and washers strip connected to earth plate including chamber PCC (1:3:6) type C1, using 20mm graded stone aggregate alongwith lifting handle complete all as specified in electrcial plate no. 3 of SSR Part-I all as directed. (Note:-Copper strip upto 7.5 m length in included in unit rate quoted by contractor).

M & L in replacement for Chemical earthing complete with Copper earth plate electrode of size 900 mm x 600 mm x 5 mm thick buried directly to ground vertically to a depth not less than 2.25 Mtr below the ground level with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to Copper strip 32 x 6 mm size as earthing lead filling around with chemical such as earth enhancing compound (MGSO4) including excavation, returning, filling of earth and disposal of surplus soil to a distance not exceeding 50 mtr and connected to copper strip by means of Copper nuts, bolts and washers strip connected to earth plate including chamber PCC (1:3:6) type C1, using 20mm graded stone aggregate alongwith lifting handle complete all as specified in electrcial plate no. 3 of SSR Part-I all as directed. (Note:-Copper strip upto 7.5 m length in included in unit rate quoted by contractor).

M & L for removing old paint from the LT panels / Feeder Box / Pole by paint removers, cleaning by scrapping and preparing the surface and applying two coats of synthetic enameled paint of existing colour over a coat of red oxide primer and writing any description as required complete all as specified & directed. Note: Pole number in MB shall be recorded.

M & L for re-routing of LT cables off sizes from 10 Sqmm to 400 Sqmm, 2/3.5/4 core in ducts/wall/floor/roof/trusses etc incl. re-alignment, cutting/chassing in wall/duct and re-fixing as per site requirment, including replacement of luggs, nut, bolts, washers, saddle clamp etc, including making good the disturbed surface to match with the existing surface. complete all as specified and directed. Note: Initial and Rerouted Layout of cable after rerouting shall be sketched in MB.

M & L for detection of fault through fault locating high voltage mobile machine to locate the fault in underground cable by giving high voltage surge and to find out exact location of fault all as directed at site. (Note : The Item includes transportation, fuel charges, charging of machine etc. upto detecting fault at a time. Bidder must quote rate considering the fact that it is solely his responsibility to arrange fault locating machine & he should'nt expect facilitation from the dept. for the same.)

Taking out , shifting and reinstalling of LT switchgears / LT Panel / Pole / VCB / Transformer to a distance not more than 5 kms from power house / substation / any place and connecting incl. casting of suitable PCC foundation etc as per the site requirement complete all as specified and directed.

Attending breakdown attributable to cable faults or any of the connected transmission system & rectifying it in cable transmission line network upto end connections or any of electrical item connected therein during any hours of a day after receiving communication through Complaint Section / Concerned JE / Engr-in-charge either through teleponic call, text message, email or through messanger 24x7 hrs. Note:- The occurance of fault if any, will be communicated to the contractor and the contractor shall rectify the same within 02 hrs of reporting, failing to which a recovery @ Rs 500/= per complaint per day and maximum of Rs. 10,000 /= per day shall be recovered from contractor's payment.

S & F in replacement of aluminium bus bar as per existing size, type and suitable for LT panel 415 Volt including insulator, taping / sleeving of bus bar and all accessories including nut, bolts, washers etc. complete all as specified and as directed.

Supply, laying, testing and commissioning in replacement of LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core laid in trenches/duct/pole/wall etc. incl. suitable size lugs ,thimbles, glands, GI Nuts and bolts, washers, insulation tape etc. complete all as specified and directed. Make :- Havells / Grandlay / Polycab / Gloster as approved by GE.

All as per Item No. 44 above but of size 16 sqmm 4 core.

All as per Item No. 44 above but of size 25 sqmm 3.5 core.

All as per Item No. 44 above but of size 50 sqmm 3.5 core.

All as per Item No. 44 above but of size 95 sqmm 3.5 core.

All as per Item No. 44 above but of size 150 sqmm 3.5 core.

All as per Item No. 44 above but of size 185 sqmm 3.5 core.

All as per Item No. 44 above but of size 240 sqmm 3.5 core.

Excavation in trenches by mechanical means, not exceeding 1.5 mtr wide and n. exc 1.5 m in depth for laying of cable for soft/ loose soil and getting out complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm apart for soft/loose soil complete all as specified and directed.

M & L for dry Ganga Sand cushioning in trenches for protection of cable including watering and consolidation complete all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose

M & L for well burnt brick sub class B old size, with width equal to length of brick, laying in trenches for cable protection complete all as specified and directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

VEE KAY ENTERPRISES

Preetpowercontrol

S B ENTERPRISES

PAWAN COOL CORPORATION

santosh electronics

Kumar Electricals

Bharat Sales Corporation