Renovation of Executive Room No.205,206,207,208 and modification of balcony in 104 of Guwahati Guest House, NEEPCO, Sundarpur, R. G. Baruah Road, Guwahati.PIN 781005

Amount

Supply, fitting & fixing of 19 mm thickplywood board of approved brand and manufacture fixed over wooden wood or wood based surface by applying water resistance adhesive of approved brand and manufacture complete as directed and specified by the department

Supply, fitting & fixing of 12 mm thickplywood board of approved brand and manufacture fixed over wooden wood or wood based surface by applying water resistance adhesive of approved brand and manufacture complete as directed and specified by the department (wood frame work shall be paid separately)

Providing, fitting and fixing of 1mm thick Century/Green/Marino or equivalent make laminate (Mica) of required shade fitted over wood base surface by applying water resistance adhesive of approved brand and manufacture complete as directed and specified.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded Code Description Unit Rate No. 542 SUB HEAD : 26.0 NEW TECHNOLOGIES AND MATERIALSstar headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 150 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size 11.41A.2.2 Size of Tile 600 x 1200 mm

Supplying,fitting & fixing of PVC Louvers (Panel) & PVC L of approved brand and manufacture over 12 mm thick plywood panelling by applying water resistance adhesive of approved brand and manufacture complete as directed & specified by the department.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Supplying,fitting & fixing Godrej make Mortise Lock, Product Code: 6757 having 1 unit Lock,1 Unit Striker Plate, 2 Unit Handles, 1 unit square Shank,3 Unit Keys,13 Unit Screws,1 Unit Pincylinder,alongwith Warranty Card. .

Providing,fitting and fixing aluminium hollow section of size 63.5 mmx38.10 mmx 2 mm thick for aluminium frame partition wall of approved brands,with frames of a maximum spacing of frame 1.20m joints metred and joints with SS screws ( manufactured to relevant I.S.specification) and providing and fitting angle cleat,rubber gasket,bolting device screws etc. at all levels.(Glazing and prelaminated board to be measured and paid separately) In coloured Anodised Aluminium Section.

Providing and fixing glazing in aluminium door,window, ventilator shutters and partition etc with EPDM rubber/Neoprene gasket etc. complete as per the architectural drawings and the directins of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item. With float glass panes of 5mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing 12mm thick pre-laminated particle board flat pressed three layer or graded wood particle board confirming to IS: 12823 grade I type II, in panneling fixed in aluminium doors, windows, shutters and partition frames with CP brass/stainless steel screws etc complete as per architectural drawings and directions of engineer-in-charge Pre-laminated particle board with decorative lamination on both sides

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having threaded fittings, including fixing the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 20 mm nominal dia pipes

Providing and fixing brass bib cock of approved quality. 20 mm nominal bore

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm nominal dia Pipes

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Supplying,providing & installation of Kitchen Sink Code: GRACE PLAIN 24x18 (single bowl SS)along with required accessories i.e. Sink cock Code:ARI-CHR-393475 and Waste pipe Code:Clanzo as per instruction of Department.

MERCANTILE SYSTEM (BID ID -961034)

BINOD BORAH (BID ID -961095)