PROVN OF FLYPROOF WINDOWS DOORS TILING GRANITE COOKING PLATFORM SINK PLATE RACK WASH BASIN IN BLOCK NO P 413 P 328 P 286 P 287 P 288 IN VIKRAM BATRA VIHAR AND PROVN OF DEFICIENT STEEL PLATE RACK SINK GRANITE SLAB IN KITCHEN COOLER STAND

Amount

S&F stainless steel kitchen plate rack thickness of sheet not less than 0.80 mm four shelves made out of stainless steel sheet over all size 750 mm x 750 mm x 250 mm including 32mm dia CP waste coupling and 32mm dia and 90 cm long PVC waste pipe,brackets complete all as specified and directed.

S&F sinks made of stainless steel thickness of sheet not less than 0.80 mm kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia CP waste coupling and 32mm dia and 90 cm long PVC waste pipe,brackets complete all as specified and directed.

S&F Vitreous China wash basin, white, flat back, size 550X400mm excluding tap, including 32mm dia CP waste coupling and 32mm dia and 90 cm long PVC waste pipe,PVC Connection 15mm size with PTMT nuts of length 450mm,brackets complete all as specified and directed.

S&F 15mm dia Pillar taps, cast copper alloy, with capstan heads fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore bib taps standard of CP fancy type long body high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore dia bib taps standard of CP/Brass long body high pressure screwed for iron pipe and fixed by replacing PVC tap complete all as specified and directed.

S&F 15mm bore dia stop valves/angle valve cast copper alloys, screwed down high pressure but fancy type chromium plated with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 20mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixed complete all as specified and directed.

S&F CP grating 100mm dia round hole/without hole fix on floor/ nahani trap fixed with cement paste, complete all as specified and directed.

S&F tubular towel rails 20mm dia, D type 600mm long between flanges of brass chromium plated complete all as specified and directed.

S&F 5.5mm thick sheet glass corner shelf 300 mm size in bath including stainless steel railing and CP bracket complete all as specified and directed.

S&F glass shelf size 450mmx100mm with stainless steel railing fixed to wall with wooden plug and screws complete all as specified and directed .

M&L Cutting holes into brick walls built in cement mortar superficial area n exc 150 sqcms and making good in CM 1:3 or cement concrete 1:2:4 type B1,complete all as specified and directed.

S&F 15 mm bore GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors including making connection with existing pipeline complete all as specified and directed.

S&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm dia bore. complete all as specified and directed.

S&F salt glazed stone were gully traps size 150 x 150mm square & round mouthed trap P etc complete all as specified and directed.

M&L for Factory made RCC GT Cover of Size 400mm x 500mmx 50mm thick with 01 No handle and 150mm dia notch at one side of cover at center at 500mm long side complete all as specified and directed.

Demolition of reinforced cement concrete as in Kitchen slab, Chullah hood, chimney portion and similar work concrete of any description and in any position not otherwise specifically provided etc including removal of rubbish beyond MOD land complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc including removal of rubbish beyond MOD land complete all as specified and directed.

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

M&L for Brick work with sub class B bricks straight or curved on plain to any radius in half brick thick wall built in CM 1:6 etc complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concerete all as specified and directed.

M&L for reinforced cement concrete using type B-1, 1:2:4 (20mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like concerete all as specified and directed. (Note :- Steel reinforcement bars shall be measured and paid separately under relevant items)

M&L for mild steel TMT bars 8mm dia and over upto 10mm dia cut to length,bent to shape required including cranking, biniding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L 16-18mm thick black granite work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including screed bed of 20mm thick in CM (1:6) including rubbing and polishing and making hole in the platform for gas connection complete and incl nosing of the edges half round (Stone slab shall fixed as in one piece and area n.exc 1.5 Sqm ) complete all as specified and directed.

M&L Udaipur Green marble stone slab 16-18mm thick machine cut, bedded jointed and pointed with white cement mixed with pigment to match the shade of stone including cutting, rubbing and polishing surface and rounding off edges match laid over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) complete all as specified and directed.

Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium three track window, shutter (Size 45X15mm) i.e. two shutter with 4.8mm thick tinted glass and one with stainless steel wire cloth of 0.36mm dia and avg width of apperture 1.40mm and sliding section confirming section Cat No 20814 (From jindal) and frame (Chowkhat) size 101.60X44.45X1.90mm thick etc including all necessary locking arrangement complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium partly fixed and partly sliding shutter (Size 45X15mm) three track window, two shutter with 4.8mm thick tinted glass and one with stainless steel wire cloth of 0.36mm dia and avg width of apperture 1.40mm and sliding section confirming section Cat No 20814 (From jindal) complete size of section (92.00X45.5) and frame (Chowkhat) size 101.60X44.45X1.90mm thick etc including all necessary locking arrangement complete all as specified and directed.

M&L for powder coated aluminium ventilator, openable, top hung and bottom portion fixed type without sash bars with aluminium section of weight 0.55 kg/RM including glazing, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and top hung shutter fixed hook & eye minimum one no on each shutter, one no aluminium tower bolt 100mm long and 75mm long aluminium handle in each shutter etc. including all necessary locking arrangement complete all as specified and directed.

S&F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars complete all as specified conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section, frame work for chajja with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting, cooler stand or other covering. confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding complete all as specified and directed. (Butt hinges shall be measured and paid for separately)

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, bed plate, hold fasts etc complete all as specified and directed.

S&F 35mm thick factory made plain framed panelled shutters, (any number of panels) with lock rails in IInd class HW and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003, Kiln seasoned and chemically pressure treated all as specified and as directed by Engineer-in-Charge.

S&F 35mm thick glazed skelton shutter IInd class hard wood rebated and prepared to received glass, gauge etc (with sash bars) edges of forming plain,chamfered or rounded fitted with mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8,clause 8.24(a) etc.complete all as specified and directed.

S&F 3mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width or aperture1.40mm fixed with tinned tack or stainless steel wire staple complete all as specified and directed.

M&L painting two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces exc 10mm girth including preparation of surfaces complete all as specified and directed.

M&L painting two coats of synthetic enamel paints over a coat of pink primer on wooden surfaces of girth exc 10CM, including preparation of surfaces. complete all as specified and directed.

S&F 200mm, mild steel ordinary rat tail rod pattern springs includng roller and roller plate complete incl necessary welding if required complete all as specified and directed.

Supply only butt hinges 100mm size medium weight cold rolled MS to pressed steel/angle iron frames complete all as specified and directed.

S&F 125mm size MS pressed hangles, oval type, stove enamelled black complete all as specified and directed.

S&F 250mm size MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 150mm size aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

Taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc including removal of rubbish beyond MOD land complete all as specified and directed.

M&L 15 mm thick rendering in cm 1:6 internal face of wall finished fair even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering on concrete surface in cement mortar (1:4) surface finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed.

M&L preparation of surfaces and applying two coat of cement base paint over a coat of primer on external surfaces complete all as specified and directed.

S&F 100 mm CI soil waste and vent pipe in any length GT to first manhole with or without ears with connecting joints, laid in trenches or in floor complete all as specified and directed.

S&F 100 mm PVC pipe in any length with or without ears with connecting joints laid in trenches or in floor from GT to 1st manhole complete all as specified and directed.

S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes 75mm bore sand cast in any length with or without ears, with cement joints, laid in vertical surfaces including disamntling of existing PVC pipes complete all as specified and directed.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in wall including making cutting in chajja for laying of pipe and making good the surface by using PCC 1:2:4 type (B-1) using 20mm graded aggregate complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75 mm floor trap CI with grating including waste hole including demolition of cement concrete for jointing to waste pipe and fixed in cement concrete 1:2:4 type (B-1) complete all as specified and directed.

M&L Glazed ceramic tiles joint free coloured of size 300X450X7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 including dismantling of existing tiles or terrazo finish including cement mortar bedding of any thickness complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 400mmX400mm 7 to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:6) laying floor finish including dismantling of existing tiles or terrazo finish /roughening surface of old concrete floor including cement mortar bedding of any thickness complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 300mmX300mm 7 to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:6) laying floor finish including dismantling of existing tiles or terrazo finish /roughening surface of old concrete floor including cement mortar bedding of any thickness complete all as specified and directed.

M&L for point wiring with 3 x1.5 sqmm (nominal area) FRLS PVC insulated unsheathed and copper conductor cable ( phase ,neutral and earth wire ) in existing concealed conduit /open PVC rigid conduits,earth wire connected to comman earth dolly with and including pressed steel sheet metal sunken box of suitable size for fixing switches/ sockets etc with cover plate 3 mm thick plastic laminated sheet for one light /fan /exhaust fan/ circulator fan/ bell /buzzer controlled by one way switch complete all as specified and directed :-

(a) One light/fan/Exhaust fan/bell point controlled by one switch.

All as per item No. 66 (a) here in before but with 2x2.5 Sqmm and 1x1.5 sqmm cable for earth connection for one 3 pin socket outlet 15 amps independent board complete all as specified and directed

S&F switch piano flush button type 15 amps single pole one way complete all as specified and directed.

S&F socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified and directed.

Supply and fixing switch piano flush type single pole one way 5 amps.

S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

S&F metal type exhaust fan single phase 230/240V of 300 mm sweep including cutting of holes in a round shape and including fixing the exhaust fan complete all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 85670.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum

M/s M M BAHL

Chandramauli Engineers Pvt. Ltd.

Adhunik Builders

garnet engineers contractors

GAUTAM ELECTRIC WORKS

M/S Yamin

PRAHLAD NARAIN KOLI