Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance C 49 B RADHA GARDEN MEERUT 250001 UP | MEERUT | MEERUT | UTTAR PRADESH | 250001 | Admitted-Finance |
| 2 | Admitted-Finance H NO 411 SECTOR 4 CHANNI HIMMAT JAMMU 180015 J K | JAMMU | JAMMU | J K | 180015 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹34.0 L
EMD Value
₹67,960
Closing Date
22 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Cdr, HQ 138 WE
HQ 138 Works Engineers PIN-914138 C/O 56 APO
SPL REPAIR TO BLDG NO TA-205 UNDER GE 865 EWS AT LEH
2024_MES_655948_1
138WE/L-19/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE 865 EWS
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE 865 EWS
₹67,960
Yes
2 Jul 2024
25 May 2024
29 Jun 2024
25 May 2024
22 Jun 2024
8 Jun 2024
Amount
Demolition of cement concrete in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed
Demolition of cement concrete in any description and any position not otherwise specifically provided for, compete as specified.
Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members. complete all as specified and as directed
Dismantlng framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton unframed work. complete all as specified and as directed
Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed.
Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed.
Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and as directed.
Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed .
Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed,
Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed.
Dismantling boarding / wooden flooring of any description ,fixed in any positon complete all as specified and as directed
Dismantling floor, hearth or wall tiling including wall cement mortar bedding (But not backing ) and rubbish of premises complete all as directed.
M&L for 25mm thick PCC type B-1 using 20mm graded crushed stone aggregate as in floor finishes complete all as specified and as directed
M&L for vetrified ceramic tiles 10mm thick (light shade ) (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed with cement mortar (1:6) 15mm thick for laying floor tiles all as specified and directed.
M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11Sqm and nexc 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the colour of tiles over and including screed bed with CM (1:6) 15mm thick laying floor tiles complete all as specified and directed.
M&L for (350mmx250mmx7mm/450mmx350mmx 7mm thick ) white Glazed ceramic tiles set on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or colored cement to match complete including 10 mm thick rendering in cement mortar 1:4 all as specified and directed for shade, pattern and laying of tiles complete all as specified and directed.
M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
Demolition of reinforced cement concrete in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed
M&L Form work to sooffits of suspended slabs such as roof, floor slabs,landings etc n.exc 200mm thick (horizontal or sloping) complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4, nominal mix (20 mm graded crushed stone Aggregate) as in beam cantilevers, bressummers, lintels over 1.5 m span. complete all as specified and directed.
M&L mild steel TMT bars 10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L for Mild steel TMT bars 5mm dia and over and up to 10 mm dia and over as in stirrups, binders and spacers and cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets or as specified by manufacture all as specified and directed.
M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.
M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in ceiling panelling, shelves/boarding complete all as specified and as directed.
M&L French polishing on wood or wood based surface of any width or girth or any description,including cleaning and preparing the surface including a coat of wood filler on new surface with two or more coats complete all as specified and as directed.
M&L for not less than 15mm thick wooden battens of 100mm wide fixed each other with male and female grooves fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.
M&L for not less than 15mm thick wooden battens of 100mm wide fixed each other with male and female grooves fixed with screws to timber frame work as in ceiling panelling, shelves/boarding complete all as specified and as directed.
M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed.
M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed.
M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed.
M & L for 75 mm PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as plinth protection finished even and smooth with out using extra cement, complete all as specified and as directed.
M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection, complete all as specified and as directed.
M&L for PCC type D2 (1:4:8) using 40mm graded crushed stone aggregate as mass conc and filling of foundation. complete all as specified and as directed.
M&L for pre cast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded curshed stone aggregate complete all as specified and directed.
All as per item No 36 but except blocks complete all as specified and as directed.
M&L for 10mm thick rendering on other than fair faces of Stone wall works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed
M&L for 10 mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed
S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete(Glass shall be measured Seperately) all as directed by Engr-in-Charge.
S&F for 35mm thick 2nd class soft wood plain framed paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats , complete all as directed by Engr-in-charge.
S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats , complete all as directed by Engr-in-charge.
S&F 2nd class soft wood 35 mm thick Glazed and skelton shutter, open and prapared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately) complete all as specified and as directed by the Engr-in-Charge..
M&L for preperation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamal paint over a coat of pink primer complete all as specified and as directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified
S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters,including aluminium jali fixed in one side, side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) etc. complete all as specified
S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified
M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.
S&F in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples. complete all as specified and as directed.complete all as specified and as directed.
M&L sheet glass 5.5mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.
S&F in repairs 5.0mm thick figured glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed including hacking out old glass. complete all as specified and as directed.
S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.
S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.
S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.
S&F in repair aluminium (Die cast) body door closer hydraulically dessignation No 3 universal type suitable for door shutter of 851 to1000mm in width and weight 61 to 80 kg all as specified and directed
M&L for aluminium (extruded section body) door closer hydraulically regulated designation No 3, universal type, suitable for door shutterof 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed completed all as spd and directed.
S&F floor door stopper (Length of cover plate ) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.
S&F 75mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed.
S&F 100mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed.
S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed.
M&L for preparation new steel surfaces of any description, not otherwise described, over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed
S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.
S&F Plates Fe-410W(GdeE-250) Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated complete all as specified and as directed.
S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified
S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick as in ridges , valley gutters drip etc of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified
M&L for preperation of new plastered wall surface of any description and applying three coat of white wash complete all as specified and as directed.
M & L for two coat of cement base paint on newly plastered surfaces including preparation of surfaces,complete all as specified and as directed.
S&F in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs all as specified and as directed by Engr-in-charge.
S&F in repairs Towel Hnager with 6 Nos of pin and 600mm long chromium plated etc complete fitted as per sepcified and directed by Engr-in-charge
Taking up or down existing steel/PPR tubing and connections, 25 or 32 mm bore of pipe and connections in any position including cleaning for refixing or removal to store complete all as specified and directed.
S&F 3- layer PP-R Polypropylene random copolymer) pipes 25mm dia SDR 7.4 & SDR 11 UV stabilized and antimicrobial wilded having thermal stability for hot & cold water supply including all PP-R plain an brass threaded polypropylene random fittings fixed complete to wall , ceiling or in floor etc all as specified and directed
All as per item No 74 above but 32 mm bore, complete all as specified and as directed.
S&F in PP-R gate valves 25 mm dia brass insert as per requirement of the site complete all as specified and as directed.
Dismantling water tanks and removing to store Exc 250 and n exc 500 ltrs capacity, complete all as specified and as directed.
S&F rotational moulded HDPE water storage tanks 500 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48kg/Cum (cylindrical vertical type/rectantular loft type closed top) hoisted and fixed in position all as specified and directed by Engr-in-Charge.
S&F chromium plated brass paper holder, complete all as specified and as directed.
S & F in repair Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete.
S & F CP health faucet ABS with double lock 1.2 mtr CP tube stainless steel flexible hose and wall hook all as specified and as directed.
S & F CP toilet jet spary ABS with double lock 1.2 mtr CP tube stainless steel flexible hose all as specified and as directed.
Supply & Fixing sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.
Supply & Fixing sheet glass basin shelf assembly consisting of 8mm thick glass shelf 600 x 150mm wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.
S&F Soap dish, any type, fixed to plugs with chromium plated brass screws completed all as specified and directed.
S&F flushing cistern of PVC 10 ltr capacity with dual flushing system, white colour, valveless syphonic action type, low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.
S&F in repair Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.
S&F in repair Angular Stop Cock, CP, fancy type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.
S&F in repair towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified.
S&F in repair PVC connections 15mm size with brass nuts of length 450mm complete all as directed and specified.
S&F Vitreous china counter base wash hand basin white minimum size 500X420x160mm including chromium plated brasss coupling, bottle trap, 600mm PVC braided connection (two number), angular stop cock, (Valve) (two number) complete all as specified in particular specifications. complete all as specified and as directed.
S&F 15mm central hole brass chromium plated basin mixer with regular spout with/without popup waste system with 450 mm long braided hoses complete. complete all as specified and as directed.
S&F vitreous china premium/1st quality wash basin full pedestal, white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer and incl 32mm brass CP waste coupling half thread and complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.complete all as specified and as directed.
S&F viterous China urinal half stall type white including CP spreader, waster pipe etc complete all as specified and dirtected .
S & F in repair 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe. complete all as specified and as directed.
S&F for 32 mm dia PVC waste pipe for wash hand basin / Kitchen sink etc complete all as specified.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
S&F PVC(HDPE) SWR 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, laid in treches or in floor complete all as specified and directed by Engr-in-Charge.
S & F 110 mm bore PVC (SWR) single socleted in any length with rubber rings joints, fixed to wallas and vent pipe as specified and directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
S&F PVC(HDPE) SWR 75 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, laid in treches or in floor complete all as specified and directed by Engr-in-Charge.
S&F PVC(HDPE) SWR , 40 mm bore, single socketed in any length with rubber ring joints using solvent cement as per manufacture instruction, including all fitting elbow, tees, sockets, bends etc. laid in walls & floors for connecting bottle traps & nahani trap complete all as specified.
M&L PVC (SWR) 75 mm dia floor trap with plain with grating including jointing with solvent cement complete all as specified and directed.
S&F grating doom 75mm dia of PTMT (min weight 25gms) complete as specified and directed
S&F PVC (SWR) 110 mm bore vent cowl complete all as specified and directed.
S&F PVC (SWR) 100 mm 'P' traps complete all as specified and directed.
M & L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100mm bore pipe line complete all as specified and as directed by the Engineer-in-Charge
Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as spfd and directed.
Taking down care fully sub main wiring/service wire of any description complete all as specified and dirtected .
M&L for Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded FRLS PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:-
One light/exhaust fan point controlled by one way switch complete all as specified and dirtected
One bell point controlled by one bell push on independent board complete all as specified and dirtected .
One switch socket outlet 6 Amps, 230 volts point on Same board complete all as specified and dirtected
One switch socket outlet 6 Amps, 230 volts point on independent board complete all as specified and dirtected
All as item No 112 above, but using cables 4 Sq mm size complete all as specified and dirtected.
Supply and replacement of lamp holder insulated body with back plate complete all as specified and dirtected .
Supply and replacement of bell push single pole 230 volt complete all as directed.
M & L in repair for bell ding-dong single pole complete all as directed.
Supply and fix in replacement of Modular Switch 1 way 6 Amps 230 volts, 1 Module complete all as specified and directed.
Supply and fix in replacement of modular white cover plate with frame of 6 Module suitable for Modular switch 1 way 6 Amps 1 Module complete all as specified and directed by Engr -in-charge.
Supply and fix in replacement of modular metal flush box of 06 Module suitale for Modular Switch 1 way 6 Amps complete all as directed.
Supply and fix in replacement of Modular switch Socket combination out let 5 pin 6 Amps flush type.230 volts complete all as directed.
Supply and fix in replacement of Modular switch Socket combination out let multi purpose 5 pin 6 Amps and 16 Amps 230 volts complete all as directed.
Supply and fix in replacement of modular white cover plate with frame of 3 Module suitable for 3 pin 6 Amps and 16 Amps 230 volts complete all as directed.
Supply and fix in replacement of modular white cover plate with frame of 06 Module suitable for 5 pin 6 Amps and 16Amps 230 volts complete all as directed.
Supply and fix in replacement of modular metal flush box of 03 Module suitable for 5 pin 6 Amps and 16 Amps 230 volts complete all as directed.
Supply and fix in replacement of modular metal flush box of 06 Module suitable for 5 pin 6 Amps and 16 Amps 230 volts complete all as directed.
Supply and replacement of Ceiling rose, surface Bakelite three terminals complete all as specified and dirtected.
Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways 200 Amps all as specified and directed by Engr-in-Charge.
Supply and fix in replacement of MCB SPN 40 -63 Amp 240 Volts AC ISI marked all as specified and directed.
Supply and fix in replacement of MCB SP 6-32 Amps. 240 Volts 50 HZ complete all as specified and dirtected.
Supply and Fixing LED luminaire 600mm x 600 mm, 35/36 watt,220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete.
M&L for Earthing complete with galvanized steel earth plate electrode 600mm x600mmx 6mm thick buried directly in ground. (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanized earth lead wire 4mm dia by GI watering pipe with funnel and wire mesh and 15mm dia protection pipe earth work etc complete all as shown in electrical plate No 5 of MES plate No. 6 complete all as specified and directed.
Supply and fixing in Replacement LED lights fitting 1X 20 watt , 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED lights fitting 1 x 16 watt, 220 volt, AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and replacement of sheet metal enclosure with 20 Amp 240 V socket plug top and MCBs single pole and neutral enclousre with two pin and earth plug and socket with one single pole 20 Amp MCB complete all as specified and directed by Engr-in-Charge.
M & L for submain wiring alongwith earth wire of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x6.0 sq. mm + 1x4.0 sq. mm earth wire complete all as specified and directed.
Supply and fixing in replacement exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 15 Hz, RPM 1200, copper winding of sweep 250mm compelte all as specified and directed.
Supply & Fixing in Replacement LED security light fitting 60 watt, 230 volt, AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp and bracket with impact and corrossion resistant incl thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed by Engr-in-charge.
Supply and fix bracket 32 mm dia MS pipe length as per site requirement with clamp nut , bolt washer suitable for security light 60 watt complete all as specified and dirtected by Engr -in-charge.
Supply & Fixing in Replacement LED light fitting 1X9 W/ 1X 10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge.
Schedule of Credit
Mehar Enterprises
M/S Praveen Kumar and Sons
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .