Estimate for Construction o...

Amount

Construction of granular sub-base by providing 401 coarse graded material Grading I, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, as per clause 401.of MORTandH specification

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to the desired density as per technical clause 406 of MORTandH specifications

Providing and laying 60mm (grading ii) mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORTh specifications

Providing and laying 40 mm bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-40 @ 5.4% per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the compaction complete as per technical clause 507 of per MORTH specifications

Providing and fixing of Pre Cast Cement concrete M-20 with stone aggregate 20 mm nominal size in Channel (250mm x 75mm )and the like items, placing and fixing in position complete in all respect

Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORTandH specifications

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per technical clause 503 of MORTandH specifications

Construction of granular sub-base by providing 401 coarse graded material Grading I, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, as per clause 401.of MORTandH specification

Providing and Fixing of Double side ARM bracket (1.5mtr side length on both sides) 40-50mm dia suitable for mounting of 9mtr Octagonal Pole.

Supply of PVC copper conductor wire 4 core of size 1.50 sq.mm for LED light connection

SITC of LED Street light, housing made up of Pressure Die Cast Housing LM 6 Alloy / Anti Dust Exposed Lens, sturdiness and embossed brand name/logo name of manufacturer. The fixture should have high power single LED chip with ceramic base resulting in a minimum system efficacy of 135 lumen/Watt and a minimum system lumen output of 16200 lumens and maximum system wattage of 120 Watts. The fixture shall have a CRI = 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK =08.The fixture shall have DIMMABLE driver and should have an operating voltage range of 140-270 V, surge protection of =4KV, PF =0.9 @ full load , THD=10% @ full load and SDCM(5. The luminaire shall have an additional SPD of 10KV. The fixture should be top openable and easy access to the Gear Compartment. The driver should be BIS approved, fully potted and en capsulated with 440V Stress Voltage protection for 8 Hrs. High Cut off : 325V( plus /- 15V) and Auto Restart function should also be available within the fixture. The luminaire, it`s driver and SPD shall be of the same make/manufacturer. The fixture should comply with the parameters as per IS10322. Manufacturer shall have a in-house NABL accredited lab for type testing the luminaires as per IS-10322 and for LM79 test

SITC of feeder pillar with 100amp TPN MCCB as incomer along with timer, contactor. Outgoing 4 No`s TPN MCB 63amp/40amp.

Supply of 25mm 4Core Alum. Armored cable loose in existing pipe or trenches complete with necessary connections

Bidder Name

Amount

DEVOTE CONSTRUCTION COMPANY(GSTN-06AAKFD2802P1ZA)

SUNIL KUMAR(GSTN-NA)

DEVOTE CONSTRUCTION COMPANY

DEVOTE CONSTRUCTION COMPANY