Nagercoil Corporation Maintenance of Anganwadi Building at Poochivilagam

Amount

Maintenance of Anganwadi Building

Dismantling ,clearing away and carefully stacking materials useful for re-use for any thick ness of wallsDismantling of Press Tiles

Dismantling ,clearing away and carefully stacking materials useful for re-use for any thick ness of wallsDismantling of Reinforced cement concrete

Dismantling ,clearing away and carefully stacking materials useful for re-use for any thick ness of wallsDismantling of Plain cement concrete

Dismantling ,clearing away and carefully stacking materials useful for re-use for any thick ness of wallsDismantling of Brick/stone masonry in Cement mortar walls under 3m high

Earth work excavation and depositing on bank with initial lead of 10metres and lift of 2metres in all kinds of soil except mediumrock, dense medium rock and hard rock requiring blasting including refilling the sides of foundation with excavated earth in layers of 15cm thick, watering and consolidation and depositing the surplus earth with in the compound in places as shown by the departmental officers with initial lead and lift. cleaning,levelling the site etc,. complete complying with standard specifications.(TNBP No.20B)

Laying Plain cement concrete 1:4:8 (One cement,four sand and eight aggregates) using 40mm ISS Hard broken granite stone jelly for foundation and basement including watering if found necessary and laid inlayers of 15cm thick, and consolidated including curing, cost and conveyance of all materials to work site all labour and incidental charges etc,. complete complying with standard specifications.(TNBP No.28)

Random rubble masonry in CM 1:5 (one cement, five sand) using best new rough and bond stones including simultaneous pointing above ground level with the same mortar including curing, cost and conveyance of all materials and labour charges etc. complete as per Standard specification

Providing steel centering for sides and soffits including supports and strutting upto 1:10/1:20 up to 3.29m height for plain surfaces such as RCC slabs, rectangular beams, Tee beams, bed blocks, Culvert body walls, deck slabs, retaining walls, staircase, Landing slab, landing beams, canopy etc., with all cross bracings using mild steel sheets of size 90mm x60mmx10gauge stiffened into welded mild steel angles of size 25mmx6mm for boarding laid over silver oak (Country wood) joists of size 10cmx 6.5cm spaced at 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 15cm c/c including cost of nails, ropes, all labour charges and incidental charges etc. complete complying with standard specification.(TNBP Spl. No.154 A)

Reinforced cement concrete 1:1½:3 (one cement and half sand and three aggregates) using 20mm ISS Hard broken granite stone jelly for Reinforced cement concrete works excluding cost of shuttering, and cost of reinforcement but including cost and conveyance of materials to work site, all labour charges and incidental charges for mixing and laying concrete,finishing the surface nearly rough, compacting using vibrators, curing etc, complete complying with standard specification.(TNBP No.30)

Supplying, fabrication and placing in position of steel reinforcement using mild steel (or) ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wire and all labour charges for cutting, bending rods, tieing into grills, placing in position etc., complete as directed by the departmental officers.( TNBP No: 15886)

Supplying and fixing of RCC Precast slab withcement concrete 1:2 : 4 mix using 20 mm metal for 75 mm thick including all cost and conveyance of all materials and all labour and materials charges etc complete as per Standard specification

Brickwork in cement mortar 1:5 (one cement and five sand) using country bricks of size 83/4"x41/4"x23/4" including curing, cost and conveyance of all materials to site and all labour charges etc. complete as per standard specifications

Ceiling plastering with CM 1:3 mix, 10mm thick (one cement & three sand) including cost and conveyance of all materials finishing curing and all labour charges etc. complete as per standard specification

Platering with cement mortar 1:5 (one cement and five sand) 12mm thick including cost and conveyance of all materials finishing curing and all labour charges etc. complete as per standard specification

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Supplying and paving the floor with design ceramic antiskid tiles of approved brand and quality (Colour/shade of the ceramic tiles shall be got approved by the departmental officers concerned) of size 200mm X 200mm x 6mm in all flooring over a base mortar using of cement mortar 1 : 3 ( One cement and three sand) 20mm thick laid in situ tructo alignment and pointed with colour cement (White cement mixed with colouring pigment) to suit the colour and shade of the ceramic tiles etc., complete complying with standard specification

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (one cement, two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Supplying and fixing in position of Indian type colour glazed water closet of size 23" with P or S trap and with foot rest and packing with brick broken jelly lime concrete 1:2:5, 100mm thick using 40mm brick jelly ISS gauge and finished to sludge out any leakage and default including cost and conveyance of all materials and labour charges etc. complete as per standard specifications

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

15mm dia Brass Tap

Supply and delivery and fixingof HDPE tank as per IS 12701 /1996 including loading, unloading,transportation and labour chargesfor fixing of the GI pipes andspecials for pipe connectionworks including cutting, threadingand fixing charges etc.,1000litre

32mm dia PVC Pipe

25mm dia PVC Pipe

20mm dia GI Elbow

25mm dia GI TEE

20mm dia GI TEE

25mm diaGM Gatevalve

20X15mm GI Reducer Elbow

110mm dia PVC Pipe

63mm dia PVC Pipe

110mm PVC Elbow

63mm PVC Elbow

63mm PVC Door Elbow

Wirinng with 2x1.5sq.mm (22/0.3) PVC insulated SC. unsheathed Cu.Conductor of 1100V garade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light/fan point (for electronic regulator) (5 points per coil)(SD 22)

Supply and fixing of single box type 4'36 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting(SD 87)

Wirinng with 2x1.5sq.mm (22/0.3) PVC insulated SC. unsheathed Cu.Conductor of 1100V garade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TW switch box for 5A 3 pin non inter locking wall socket with 5A Flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC Plug point. (SD36)Electrical data 2018-19

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm(18")(SD 106)

Painting two coats over new iron work with ready mixed paint of approved quality and colour including cost of all materials and labour charges, brushes and scaffolding charges etc. complete as per standard specification

Painting two coats over old Iron work with ready mixed paint of approved quality and colour including cost of all materials and labour charges, brushes and scaffolding charges etc. complete as per standard specification

White washing walls two coat with best freshly burnt white shell lime including cost of lime, brushes, gum, best quality of blue powder and other materials, scaffolding charges and labour charges etc. complete as per standard specifications

Painting two coats with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scribing clean remove of dire etc. complete and including cost of necessary plaster of paris, putty brushes, wherever required and all labour charges, scaffolding charges etc. complete as per standard specification

Weathering course with concrete broken brick jelly 20mm size uniform gauge in pure slacked lime (no sand to be added) over the RCC roof slabs in the proportion of brick jelly to lime being 32:12.3 by volume well beaten with wooden beaters for giving required slope and thickness, keeping the surface constantly wet by sprinkling lime jiggery water as per standard specification as directed by the departmental officers

Terrace flooring with hydraulic pressed tiles of size 23x23x2cm laid in CM 1:3 (one cement and three sand) 12mm thick mixed with water proofing compound conforming to IS at 2% by weight of cement used and the top pointed with same mortar mixed with red oxide to the full depth of tiles including cost and conveyance of all materials and labour charges etc. complete as per standard specification

Supplying and fixing of MS grills for doors, windows and ventilators as directed by departmental officers including cost of MS grills, red oxide primer one coat and all labour charges etc. complete as per standard specification