Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹24.9 LAccepted-AOC | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹25.6 L+₹59,950 (2.40%)Rejected-Finance CHIRAYANTAR JAIL ROAD GAYA 823001 | GAYA | GAYA | BIHAR | 823001 | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹26.4 L+₹1.4 L (5.48%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹26.8 L+₹1.8 L (7.14%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹26.9 L+₹1.9 L (7.53%)Rejected-Finance | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹25.0 L
EMD Value
₹50,000
Closing Date
9 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GAYA
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar, PIN-823005
Repair/Maint to Path and Hard Standing in near OTM/Md Accn of Zone A area at Mil Stn Gaya
2022_MES_535278_3
8035/GE/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GAYA
₹50,000
Yes
20 Sept 2022
1 Aug 2022
11 Aug 2022
1 Aug 2022
9 Aug 2022
4 Aug 2022
Amount
Demolition of brick work masonary built in lime or cement mortar including all quins arches pillers etc but including concrete articles and removing to store.
demolition of cement concrete in drain paving etc not exc.15 cm thickness above or below ground level .
M&L 75mm thick cement concrete type D2, PCC 1:4:8 (40mm graded agg) as in path/hardstanding as directed by Engr -in -charge
M&L sand filling under floors for laying interlocking tiles
M&L PCC 1:2:4 Type B0 (12.5 graded agg) 25 MM thick for levelling course tile
M&L PCC 1:2:4 Type B1 (20mm graded agg) as in copings,kerbs and like incl weathering slightly rounded or chamfered angles and throating as directed
M&L rubber Moulded pre-cast concrete interlocking paver block any shape and Couloring size conforming to IS 15658-2006 of 60mm thickness M-40 grade with grey cement and no pigments all as specified and directed
M&L rubber Moulded pre-cast concrete interlocking paver block any shape and colouring and size conforming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and no pigments all as specified and directed
M&L For rubber moulded Chequered cement concrete tiles any size, any colour set, jointed and pointed in neat cement slurry in floors with gray cement and all as specified
M & L 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying checkered tiles all as specified and directed by Engr-in-charge.
M&L for Precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in manhole cover slabs, size required at site include necessary formwork and carriying upto manhole and properly set in CM (1:4) after demolition of existing MH cover complete
M&L for mild steel TMT bars 10mm dia and over cut to lengh bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with and incl ms wire not less than 0.9mm dia.
Ditto all as per item no 12 above but 6 and over in stirrups, spacers and binders complete.
M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and similar work conforming to Fe.290.Gde-E-165
Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc.
M & L for rendering 15mm thick in two layers on external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement.
M&L DWC HDPE pipes class sn-8 laid in trenches, Drainage of 100 mm internal dia mtr of pipe and jointed complete all as specified and directed.
Dismantling of machine pressed precast conctete interlocking paver block/cheequred tiles any shape and size of any thickness and refixing the same in all as specified and directed.
Laying of old machine pressed precast conctete interlocking paver block any shape and size of thickness any grade with grey cement and no pigment complete all as specified and directed.
M&L for one coat of glazed lacquer paint with epoxy resin and hardener (Make : Granotone) including prepration of old painted surfaces on brick, stone concrete, asbestos cement or plaster surface of any discription over 10cm girth not otherwise described.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground
Dismantling fencing wire mesh, any type all as specified and direced by Engr-In-Charge.
Excavating in post holes (or similar holes) in hard/dense soil each not exc. 0.5 cum, getting out. returning, filling in and ramming earth or broken rubble mixed with earth around. in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc. 50 m and making good surface
M & L Cement concrete type C-2 (1:3:6) 40 mm graded aggregate) as in foundations, filling and mass concret.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete.
Supply only Chain link MS galvanisd fencing 50mm x 50 mm mesh and all specified and directed by Engr-in-charge.
S&F mild steel work in post & struts in fencing including cutting tips to shape as directed. drilling holes. notching for wire etc. including flat iron fillets for securing wire mesh etc including all necessary drilling bolting or riveting of and similar work conforming Fe-290 Gde E-165.
M&L for Preparation of new Steel surface and applying two coats of synthetic enamel paint over a coat of red oxide over 10 cm width or girth.
S & F Miid steel bolts, purpose made, with: hexagonal or 'Square head one end and screwed the other. or screwed both ends: each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long (Diameter of neck in n exc 12mm) complete all as specified and as directed.
M/S SHYAM BIHARI PRASAD YADVENDU
M/S SANJAY KUMAR YADAV
SUDHIR KUMAR SINGH
MS VD ASSOCIATES
MS HARI MOHAN GUPTA
M/S PANCHAM RAI SONS
M/S Sweta Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .