Replacement of 800mm,600mm,...

Amount

`Granular Sub-Base with Close Graded Material· (Table:- 400-1) Plant mix method Construction of granular sub-base by providing Material as per Grading Ill (Table 400-1 of MORTandH 5th revision) mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per technical clause 401 of MORTandH specifications Grading Ill material

Prime Coat @ 0.85kg per sqm Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means as per technical clause 503 of MORTandH specifications

Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORTandH specifications

`Dense Graded Bituminous Macadam 80 mm to 100 mm thickness (Grading I) Providing and laying 80mm -100 mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4.0% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORTandH specifications`

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per technical clause 503 of MORTandH specifications

`Bituminous Concrete 30 mm to 45 mm thickness (grading II) with 100-120 TPH batch type HMP Providing and laying 30mm - 45 mm bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG - 30 @ 5.4% per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of per MORTH specifications `

`Making connection in running water supply line and 400-400 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including excavtion by manual and mechanical means as per site condition,lifting and shifting of items using crane, Dewatering by 5/10/20 HP Pumps, welding,gas cutting, Concrete breaker, DG charges and all other charges as per site conditon complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately) At Kanhai chowk For connection of 400mm i/d MS Line towards Huda City Centre`

`Making connection in running water supply line and 400-800 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including excavtion by manual and mechanical means as per site condition,lifting and shifting of items using crane, Dewatering by 5/10/20 HP Pumps, welding,gas cutting, Concrete breaker, DG charges and all other charges as per site conditon complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately) For connection of 400mm i/d MS Line towards Huda City Centre`

`Making connection in running water supply line and 500-500 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including excavtion by manual and mechanical means as per site condition,lifting and shifting of items using crane, Dewatering by 5/10/20 HP Pumps, welding,gas cutting, Concrete breaker, DG charges and all other charges as per site conditon complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately) 2 Nos @ Wazirabad Red Light for pipeline towards Rajesh Pilot Chowk`

`Making connection in running water supply line and 600-600 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including excavtion by manual and mechanical means as per site condition,lifting and shifting of items using crane, Dewatering by 5/10/20 HP Pumps, welding,gas cutting, Concrete breaker, DG charges and all other charges as per site conditon complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately) 1 No each for Pipelines towards Wazirabad `

`Making connection in running water supply line and 800-800 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including excavtion by manual and mechanical means as per site condition,lifting and shifting of items using crane, Dewatering by 5/10/20 HP Pumps, welding,gas cutting, Concrete breaker, DG charges and all other charges as per site conditon complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately) 1 No each for Pipelines towards Paras Hospital `

`Making connection in running water supply line and 800-600 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including excavtion by manual and mechanical means as per site condition,lifting and shifting of items using crane, Dewatering by 5/10/20 HP Pumps, welding,gas cutting, Concrete breaker, DG charges and all other charges as per site conditon complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately) 1 No each for Pipelines towards Wazirabad and Paras Hospital`

Providing and fixing of M.S. specials as per relevant IS specifications (IS:1538-1989 with latest revision ) IS marked complete in all respect as per direction and satisfaction of Engineer-in-Charge as per site requirements (including cost of painting black).

`Providing stringing out, jointing, cutting, and testing of 400mm i/d (466 mm o/d) spirally welded M.S. pipe of 8 mm thickness to be procured from SAIL/Jindal/TATA/Welspun/SKS Pipes only made up of M.S. plate of minimum 8 mm thickness as per IS:2062, IS:3589-2001 with internal lining of 25mm thick cement mortar 1:3 and Epoxy/PU/ bitumineous paint outside as per relevant specification and IS code and laying the same in casing pipe including,welding ,cutting of the pipe etc. all material and labour as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge NOTE:- The internal diameter of the pipe will be excluding the internal lining and thickness of pipe. For 400mm i/d MS Line towards Huda City Centre`

`Providing stringing out, jointing, cutting, and testing of 500mm i/d (570mm o/d) spirally welded M.S. pipe of 10mm thickness, to be procured from SAIL/Jindal/TATA/Welspun/SKS Pipes only made up of M.S. plate of minimum 10mm thickness as per IS:2062, IS:3589-2001 with internal lining of 25mm thick cement mortar 1:3 and Epoxy/PU/ bitumineous paint outside as per relevant specification and IS code and laying the same in casing pipe including welding cutting of the pipe etc. all material and labour as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge NOTE:- The internal diameter of the pipe will be excluding the internal lining and thickness of pipe. For Pipeline at Wazirabad Chowk `

`Providing stringing out, jointing, cutting, and testing of 600mm i/d (670mm o/d) spirally welded M.S. pipe of 10mm thickness, to be procured from SAIL/Jindal/TATA/Welspun/SKS Pipes only made up of M.S. plate of minimum 10mm thickness as per IS:2062, IS:3589-2001 with internal lining of 25 mm thick cement mortar 1:3 and Epoxy/PU/ bitumineous paint outside as per relevant specification and IS code and laying the same in casing pipe including excavation of pit welding cutting of the pipe etc. all material and labour as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge NOTE:- The internal diameter of the pipe will be excluding the internal lining and thickness of pipe. For Pipeline at Kanhai Chowk

`Providing stringing out, jointing, cutting, and testing of 800mm i/d (874mm o/d) spirally welded M.S. pipe of 12 mm thickness, to be procured from SAIL/Jindal/TATA/Welspun/SKS Pipes only made up of M.S. plate of minimum 12 mm thickness as per IS:2062, IS:3589-2001with cement mortar lining 1:3 inside and Epoxy/PU/ bitumineous paint outside as per relevant specification and IS code and laying the same in casing pipe including welding cutting of the pipe etc. all material and labour as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge NOTE:- The internal diameter of the pipe will be excluding the internal lining and thickness of pipe. For Pipeline at Kanhai Chowk

`Providing stringing out, jointing, cutting, and testing of 900mm i/d (924mm o/d) M.S. Casing pipe of 12 mm thickness to be laid via trencless technology, to be procured from SAIL/Jindal/TATA/Welspun/SKS Pipes only made up of M.S. plate of minimum 12 mm thickness as per IS:2062, IS:3589-2001 with internal and outside lining of PU/Epoxy coating and as per relevant specification and IS code including laying the pipe as casing pipe through trenchless technology by pipe jacking to cross the carriage way including maintain levels with he help of laser guided equipment , excavation of thrush and receiving pit , side shoring, filling back , compaction, disposal of surplus earth including generator ,JCB, cranes, pipe jacking machine etc all material and labours as per requirment and direction of engineer in charge and complete in all respect including the cost of ground penetration radar survey . NOTE:- The internal diameter of the pipe will be excluding the internal lining and thickness of pipe. For Pipeline at Kanhai Chowk towards Ardee city and Paras hospital

Dismantling of existing old sluice valve and supply , installation, testing and commissioning of glandless with bush mechanism new sluice valve including cost of carriage,loading, unloading of DI double flanged , gear mechanism, resilient seated, non gland , non rising sluice valve of rating PN 1.6 , fixing of control rod complete in all respect as per site requirment and satisfaction of engineer in charge. Make :IVC NASIK/ VAG/TALIS 800 mm

Supply , installation, testing and commissioning of glandless with bush mechanism new sluice valve of 100 mm i/d including cost of carriage,loading, unloading of DI double flanged , gear mechanism, resilient seated, non gland , non rising sluice valve of rating PN 1.6 , fixing of control rod complete in all respect as per site requirment and satisfaction of engineer in charge. Make :IVC NASIK/ VAG/TALIS 100 MM

Supply , installation, testing and commissioning of glandless with bush mechanism new sluice valve of 150 mm i/d including cost of carriage,loading, unloading of DI double flanged , gear mechanism, resilient seated, non gland , non rising sluice valve of rating PN 1.6 , fixing of control rod complete in all respect as per site requirment and satisfaction of engineer in charge. Make :IVC NASIK/ VAG/TALIS.

Making connection of 100/150mm i/d consumer connections including all charges as per site condition as per satisfaction of Engineer-in-charge.

`Providing stringing out, jointing, cutting, and testing of 350mm i/d (416 mm o/d) spirally welded M.S. pipe of 8 mm thickness to be procured from SAIL/Jindal/TATA/Welspun/SKS Pipes only made up of M.S. plate of minimum 8 mm thickness as per IS:2062, IS:3589-2001 with internal lining of 25 mm thick cement mortar 1:3 and Epoxy/PU/ bitumineous paint outside as per relevant specification and IS code and laying the same including excavation ,welding ,cutting of the pipe etc. all material and labour as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge NOTE:- The internal diameter of the pipe will be excluding the internal lining and thickness of pipe. For Scour line connection to UGT`

Making Connection of 350mm i/d MS Pipeline with UGT at BS 51 including all labour , TandP, civil work etc complete in all respect as per satisfaction of Enginner in charge.

`Providing and fixing ATS control panel suitable for 100 hp pumping set complete with phase failure relay, seal monitor, temperature winding over protection device, main switch front operated auto stop and start , volt meter , amp meter, fuses, indicator lamp , LT main switch 400 Amp and capacitor bank 35 KVAR completely fitted in all respect as per direction and satisfaction of Engineer-in-Charge at paras online booster. MAKE:- BCH/LandT/Havel’s`

` Supply of 100 watt LED Street Light with IP 66 rating in die-cast aluminium alloy housing, SMPS based phase to phase protection, over load protection, surge voltage protection upto 10KV with external SPD and other safety and tests as per IS 15885 Past-2 tp be fixed on existed electric pole for completed in all respect to the satisfaction of Engineer-in-charge. Make: Bajaj, Havells, Philips, Crompton etc.`

Providing , fixing of cables ,cable trays for all interconnections of VCB panels, transformers,DG`s,VFD`s, motor , vaccum, dewatering pumps and all other miscellaneous electrical items for operating of boosting station complete in all respect. 300 sqmm 3.5 core Aluminium Armoured cable

Providing , fixing of cables ,cable trays for all interconnections of VCB panels, transformers,DG`s,VFD`s, motor , vaccum, dewatering pumps and all other miscellaneous electrical items for operating of boosting station complete in all respect. 95 sqmm 3.5 core Aluminium Armoured cabl

Providing , fixing, testing, commissioning of exhaust fan 24`/ 600 mm of approved make including all necessary accessories/connection fitting/ MS angle frame with wire mesh in front of fan etc. complete in all respect to the satisfaction of engineer in charge.

Providing and fixing of 100 W LED flood Light on wall/angle stand of upto 1 Mtr of approved make including all necessary accessories / fitting/ MS angles etc complete in all respect as per satisfaction of EIC. Make :- Philips/ Havells/Crompton

Providing, fixing, testing, commissioning of Guages, compound and pressure Guages of approved make complete in all respect to the satisfaction of engineer in charge

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 2 km and loading, unloading and carriage of material NA Schedule A by mechanical transport including loading, unloading and stacking of RCC pipes, a.c pipe, steel cylinder, r.c pipes, s.c.i pipes, c.i pipes and unreinforced cement pipes.

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 2 km and loading, unloading and carriage of material NA Schedule A by mechanical transport including loading, unloading and stacking of RCC pipes, a.c pipe, steel cylinder, r.c pipes, s.c.i pipes, c.i pipes and unreinforced cement pipes.

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 2 km and loading, unloading and carriage of material NA Schedule A by mechanical transport including loading, unloading and stacking of RCC pipes, a.c pipe, steel cylinder, r.c pipes, s.c.i pipes, c.i pipes and unreinforced cement pipes. 500 MM

Lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths DuctileIron (DI) standardspecials plain /flanged/ socketed confirming to IS9523-2000 with rubber ring (EPDM/SBR) joints such as tees, bends, tapers,caps etc. with in trenches in DI pipe line complete including all, labour, testing and commissioning along with pipe lineas per Technical Specifications and as per direction of Engineer. Above 300 mm and upto 600 mm

Lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths DuctileIron (DI) standardspecials plain /flanged/ socketed confirming to IS9523-2000 with rubber ring (EPDM/SBR) joints such as tees, bends, tapers,caps etc. with in trenches in DI pipe line complete including all, labour, testing and commissioning along with pipe lineas per Technical Specifications and as per direction of Engineer. Above 600 mm and upto 1000 mm

Supply of nut bolt of various size of approved make as per site requirment including loading, unloading, cartage etc. complete in all respect to the satisfaction of engineer in charge.

Credit of old material 500 mm NRV

Credit of old material 600 mm N.R.V

Credit of old material 100 hp motor with pump set

Credit of old material 800 mm Sluice valve

Credit of old material 600 mm sluice valve

Credit of old material 500 mm sluice valve

`Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per technical clause 406 of MORTandH specifications

`Replacement of old/faulty pump and motor by providing, fixing and commissioning new horizontal split casing pump having capacity : 540cum/hr at 45 meter head, RPM-1450 , identical pump model UP300/34 suction bore 350 mm , delivery bore 300mm, minimum pump efficiency 88% , along with LT elect. 3 phase induction Motor 100 Hp(75 kw), 1480RPM, efficiency 94% along with heavy duty MS base frame , coupling, coupling guard for motor and pump,gasket, nut bolt etc. complete in all respect as per direction and satisfaction of Engineer-in-Charge. at Paras online booster. Material of Construction Casing CI IS 210 FG 260 , Impeller SS - CF8 M , Impeller Seal Ring SS - CF8 , Casing Wearing Ring Bronze , Pump Shaft EN-8 ,Shaft Sleeve SS – 41, Type of Sealing Gland Type, Gland Bronze completely fitted in all respect at paras online booster as per direction and satisfaction of engineer in charge.. Make of Pump: WPIL, Kirloskar, Beacon, Grundfoss.. Make of Motor : Kirloskar, Simens, ABB, Crompton Greaves. `

`Dismantling, supplying and fixing 600mm dia new ductile iron double flanged single door swing non-return valve, generally conforming to IS : 5312 Part I, (Double Flanged), Flanges Drilling IS:1538 table 4 and 6, body and door DI/Sg.GR.500/7, Trim LTB2 AS PER IS:318, Hinge pin Stainless Steel AISI410, Painting Epoxy Coated, shade Blue 5005, pressure PN 1.6 MAKE:- IVC Nasik, VAG, Tallis, AVK, all other works completed in all respect to the satisfaction of Engineer-in-charge. `...

`Dismantling, supplying and fixing 500mm dia new ductile iron double flanged single door swing non-return valve, generally conforming to IS : 5312 Part I, (Double Flanged), Flanges Drilling IS:1538 table 4 and 6, body and door DI/Sg.GR.500/7, Trim LTB2 AS PER IS:318, Hinge pin Stainless Steel AISI410, Painting Epoxy Coated, shade Blue 5005, pressure PN 1.6 MAKE:- IVC Nasik, VAG, Tallis, AVK, all other works completed in all respect to the satisfaction of Engineer-in-charge. `......

Bidder Name

Amount

Chahar Construction Co (GSTN-06AAMFC2979A1ZI) BID ID -1182038

R.K.GUPTA. & COMPANY.INDIA.PVT LTD (GSTN-06AAECR8434L2ZZ) BID ID -1182086

R.K.GUPTA. & COMPANY.INDIA.PVT LTD (BID ID -1182086)

Chahar Construction Co (BID ID -1182038)