Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹35.5 LAccepted-AOC 777 778 SASTRI NAGAR SARAT SARANI SUBHASPALLY BURNPUR BARDHAMAN WEST BENGAL 713325 UDYAM WB 23 0020628 | PASCHIM BARDHAMAN | WEST BENGAL | 713325 | 1 | Accepted-AOC L1 BIDDER | |
| 2 | 2₹36.7 L+₹60,471.75 (1.67%)Rejected-AOC | 2 | Rejected-AOC OTHER THEN L1 BIDDER | |
| 3 | 3₹40.4 L+₹4.3 L (12.0%)Rejected-AOC | 3 | Rejected-AOC OTHER THEN L1 BIDDER | |
| 4 | 4₹42.1 L+₹6.0 L (16.5%)Rejected-AOC C O SHRI DIPAK SHYAM PO BINNAGURI DIPOPARA DIST JALPAIGURI W B PIN 735203 | JALPAIGURI | WEST BENGAL | 735203 | 4 | Rejected-AOC OTHER THEN L1 BIDDER | |
| 5 | 5₹42.7 L+₹6.6 L (18.3%)Rejected-AOC | 5 | Rejected-AOC OTHER THEN L1 BIDDER |
Tender Value
₹44.5 L
EMD Value
₹89,000
Closing Date
2 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE(SOUTH)BINNAGURI PO-BINNAGURI DIST-JALPAIGURI PIN-735232
AS PER TENDER DOCUMENTS
2024_MES_641604_1
8633/E8
Open Tender
Civil Works
Item Rate
180 days
GE(SOUTH)BINNAGURI
CLASS D CATEGORY a(i)
7 documents required · 7 mandatory
₹500
GE(SOUTH)BINNAGURI
₹89,000
Yes
3 Apr 2024
9 Feb 2024
4 Mar 2024
9 Feb 2024
2 Mar 2024
23 Feb 2024
9 Feb 2024 - 23 Feb 2024
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and as directed.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/ daddo etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/ ver surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for 15mm thick screed bed or bedding layer in CM (1:6) as in floor complete all as specified.
M &L for Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.
M&L for 10mm thick rendering in CM (1:4) as in vertical surfaces of skirting dados repairs to steps complete all as specified and directed.
M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and 15 mm thick screed in CM 1:6 complete all as specified.
M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified.
Dismantling ceiling boards (fibre, pulp, insulation etc) or insulation boards /slabs/ blankets any thickness, including cover fillets or aluminium anodised snap grid frame work as in ceiling and rubbish of the premises all as specified and as directed.
S&F anodised aluminium snap grid grame work of size 605 x 605mm for false ceiling including hangers 6mm dia GI (upto 1200mm length or as required) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed.
M&L for Aesbestos cement boards( E board) 6mm thick (600 x600mm) as in aluminum snapgrid fixed with screws as per manufacturers instructions complete all as specified and as directed
S&F in repairs particle board of 12 mm thick, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cupboard shutters including teak wood leaping externally complete all as specified and as directed.
S & F in repair 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed in repair
Taking down chowkat or frame n.exc 1.5 sqm each with shutters (without taking off shutters from the frames).
S&F Solid PVC door frame of size 50 X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specifications and drawing complete as directed.
Factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; Panelling of plain colur PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, Supplied and Fixed in the frame at site as per specification and drawings complete all as specified and directed.
S&F 75mm butt hinges medium weight cold rolled mild steel.
S&F 150mm long aluminium anodised tower bolts
S&F 125mm size aluminium anodised door handles
Taking down chowkat or frame exc 1.5 sqm but n.exc 4 sqm with shutters (without taking off shutters from the frame).
Taking down shutter exc 1.0sqm but n.exc 2 sqm and refixing in the same opening omplete as specified & as directed..
M&L pressed steel frames of size 105x60 mm for door with one or more rebates incl necessary fittings, lugs, hinges, lock strike plate, flat iron hold fast etc complete as specified & as directed.
Ditto but size 125x60mm
M&L P.C.C. Type B0 (1:2:4) 12.5 mm graded aggregate infixing holdfasts complete all as specified and as directed.
S&F 35mm thick plain framed panel shutters (three panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated.
M&L for 35 mm thick 2nd Class H/Wood gauged and skeleton shutters, open rebated and prepared to receive gauge etc (with sash bars), edges of raming plain, chamfered or grounded, fitted with cut of and mitred beads for securing gauge etc of size of members of shutters as specified in SSR Part-I section 8 clause No. 8.2(a) and fitted to chowkats complete all as specified and as directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire stapple
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire stapple
S&F 250 mm long alluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding of extruded section.
S&F 125mm size aluminium anodised door handles
S&F 150mm long aluminium anodised tower bolts
Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer
M&L for preparing of old oil bound distempered surfaces of wall including cornices, pilasters, and other wall features etc by washing, rubbing down and stopping and applying two coat of oil bound distempering (oil emulsion) on the same including chak whiting on plastered surfaces, prepara-tory to distempering complete all as specified and as directed.
M&L for preparing old decorated plastered or un plastered surfaces of ceiling including cornices, pilasters, and other wall features etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds mass and efflorescent salts and trading oil and greasy spots etc and applying two coat of white washing on the same all complete as specified and as directed.
M&L for preparing old decorated Cement base painted surfaces of wall including cornices, pilasters, and other wall features etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds mass and efflorescent salts and trading oil and greasy spots etc and applying two coat of cement base paint on the same all complete as specified and as directed.
M&L for preparation of old wall surfaces any type by vigorously wire brishing brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in cement mortar 1:3 and applying two coat of exterior emulsion paint (Apex ultima/weather coat/weather shield) white or tinted as approved complete all as specified and directed.
M&L for preparation of old painted surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel painting on the complete all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls etc incl haching out joints, racking from key, scrubbing down with date etc.
Rendering 15mm thick plastering in CM (1:6) on concrete/brick wall surfaces finished even and smooth without using extra cement.
M&L for 5mm thick plaster rendering on fair faces of concrete surfaces as in ceiling in CM(1:3) finished even and smooth (without using extra cement) complete all as specified and as directed.
M&L for 20mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm thick each) mixed with water proofing compound in top layer @3% by the weight of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed.
Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed (Make : CICO No- 1/SIKA/ACCO PROOF).
M&L for three coats of white wash on ceiling over newly plastered surfaces of wall incl preparation of surfaces.
M&L for preparing of new surface of oil bound distempered surfaces of wall including cornices, pilasters, and other wall features etc by washing, rubbing down and stopping and applying two coat of oil bound distempering (oil emulsion) on the same including chak whiting on plastered surfaces, prepara-tory to distempering complete all as specified and as directed.
M&L for applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store.
S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.
S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.
Refixing old 15mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified and as directed.
Refixing old 20mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified.
Disconnecting existing tanks, setting a side (or lowering if required) for repairs, cleaning etc. & hoisting if required, reconnecting and refixing in position after cleaning and removing all sludge and dirt etc with help of scrapers, wire brush and applied castic soda and bleaching powder and cleaning out all sludge from tanks and mouth of circulating pipes etc of tanks capacity exc. 250 Ltrs and not exc. 500 Ltrs
Disconnecting existing tanks, setting a side (or lowering if required) for repairs, cleaning etc. & hoisting if required, reconnecting and refixing in position after cleaning and removing all sludge and dirt etc with help of scrapers, wire brush and applied castic soda and bleaching powder and cleaning out all sludge from tanks and mouth of circulating pipes etc of tanks capacity exc. 500 Ltrs and not exc. 1000 Ltrs
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity incl Dismantling water tanks & removing to store
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity incl. Dismantling water tanks & removing to store
S&F in reparis 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed with and including wall flange (Minimum weight 15mm-90gms)complete all as specified and as directed.
S&F in repair 15mm dia Bib tap, fancy type, chromioum plated long body, handles screwed with wall flange for iron pipe and fixed complete all as specified and as directed. Make : Jaquar or Equivalent
S&F in repair of swivel shower for fixing with 15 mm pipe including Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange etc complete all as specified and directed.
S&F in repairs of PVC 75 mm bore (SWR) pipes single socket, in any length with rubber ring joint, fixed to wall complete
S&F in repairs of PVC 110 mm bore (SWR) pipes single socket, in any length with rubber ring joint, fixed to wall complete
S&F of PVC (SWR) bend of 75 mm bore.
S&F of PVC (SWR) bend of 110 mm bore.
Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips.
S&F of 3mm thick plain glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as directed.
S&F of Figured glass, pin head type 4mm thick in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.
S&F in repairs ball valves of 20mm bore high pressure of PTMT with empxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (Minimum weight 20 gms-210 gms)
S&F in repair PVC seat cover for pedestal pan, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.
S&F in repairs towel rail 600 mm long stainless steel of fixed with and including Chromium plated brass screws and wooded/plastic cleats etc complete all as specified and directed..
S&F in repairs pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore. ( Make:JAQUAR/HINDWARE/CERA)
S&F of PVC Connection pipe 15mm size with PTMT nuts of length 600 mm
S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste , chain & plug & porcelain stopper ut including brackets incl cutting for pinning in ends of bracketes or erecting stand but exclusive of fixing of supply and waste pipe incl dismantling old wash basin any description.
S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications as specified. (Make : Parryware or Equivalent)
S&F in repair only Vitreous China wash down water closet pan (Pedestal pattern), white (exluding fixing bolts, flushing cistern and flush pipe with and including PVC seat cover complete all as specified and as directed.
S&Fin repairs 10 Ltrs capacity PVC low level valveless syphonic action type flusing cistern star white with inlet ball valve float and handle including brackets complete all as specified and as directed including Taking down old unserviceable flushing cistern of any type of any size.Make : Parryware or Equivalent
S&F in repairs PVC flush pipe of 32 mm dia pipe with two Nos check nuts for connecting low level flushing cistern to ITWC complete all as specified.
S&F in repairs for PVC (SWR) floor trap of 63 mm dia, plain with grating including jointing with solvent including proper bedding and jointing with existing pipe
S&F in repairs CP nipple for stop cock/bib cock/mixer (esco type)
Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed. (Make: NIRALI OR EQUIVALENT APPROVED MAKES).
Demolition of cement concrete (un-reinforced) in ground floor and pavings n.exc 15cm thickness (below or above ground level) including removing all as specified and as directed.
M&L for 75mm thick PCC (1:3:6) Type C2 using 40 mm graded stone aggregate as in path/floor etc even and rough to receive the top layer all as specified and as directed.
M&L for 15mm thick screed bed in CM (1:6) for laying floor finishes all as specified and as directed.
M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry (with grey cement and pigment) as in path/pavings all as specified and as directed.
Excavation in tenches n.exc 1.50m wide and n.exc 1.50 m in depth for foundation or for laying of sewage line etc and getting out in soft/loose soil complete all as specified and as directed
All as per item No 1 above but exc 1.50 m in depth.
Demolition and breaking up 100/150 mm drain pipe (salt glazed stone ware AC or reinforced concrete) set in cement mortar along with concrete bed of drain pipe as in damaged portion of sewage line and work in foul position complete all asspecified and as directed.
All as per item No-94above but 200mm dia
M&L for 100mm thick concrete bed to drain pipe (100mm bore) with PCC (1:4:8) type D2 using 40mm graded stone aggregate including packing under and haunching aginnst the sides of pipe after they are laid jointed and tested complete all as specified and as directed.
All as per item No-96 above but bore of drain pipe 150mm
All as per item No-96 above but bore of drain pipe 200mm
M&L for salt glazed stone ware drain pipe grade - A, as per IS-651-1980, 100mm dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and as directed.
All same as per item No. 8 above but 150mm bore
All same as per item No. 8 above but 200mm bore
Returning, filling in, incl. spreading, leveling, watering & well ramming in layers n.exc 25 cm in soft/loose soild in excavated pit or trenches all complete as specified and as directed.
Removing excavated surplus soils to a distance n.,exc 50 m and depositing where directed at a level n.exc 1.50 m above the starting point all complete as specified and as directed.
Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles
Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4)
Cleaning blockage of sewer lines in any position by Roding from both sides between two adjacent manholes or from inspection chamber to manhole or from gully trap to inspection chamber or through inspection eye of any depth till clear flow of sewer/water is observed complete all as specified and as directed for the 100/150mm dia (internal) of sewer pipe linescomplete to walls and ceilings or laid in floors all as directed. (Note:- Unit rate quoted shall deemed to be included of cleaning of scrubs, grass small roots etc, around the manholes, inspection chamber at adjacent to the pipe lines cleaning etc and along sewage lines wherever required or as directed and no extra payment shall be made on this account).
All as per Item No-58 here in above But for 200mm dia(internal) pipe line - ditto -
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.
M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundn terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :- (a) One light point controlled by one way switch 5/6 amps.
(b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.
(c) One socket out let 5/6 amps point on the independent board
(d) One bell/buzzer point controlled by one bell push button
(e) One light point controlled by two two way switch 5/6 amps.
All as per item No 2 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.
M&L point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size 'medium grade' PVC doubled lock Casing-Capping and fittings, including, pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed. (a) One light point controlled by one way switch 5/6 amps.
(b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.
(c) One Socket out let 5/6 amps point on the independent board
(d) One bell/buzzer point controlled by one bell push button
All as per item No 4 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.
S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed.
S&F switch piano type 2 way 5/6 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge.
S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.
S&F socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified and directed by Engr-in-Charge.
S&F Switch socket combination 2 in 1, 5A, multipin, flush type
S&F Switch socket combination 3 pin 16A, multi pin, flush type
S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed.
S&F bell/buzzer push 5/6 amps flush type white/ivory finish complete all as specified and directed.
S&F call bell ding dong type AC Single pole 220/240 Volts, surface type complete all as specified and directed.
S&F in repair switch piano flush type 5/6 amps single pole one way complete all as specified and directed.
S&F in repair socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.
S&F in repair socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified and directed by Engr-in-Charge.
S&F in repair Switch socket combination 2 in 1, 5A, multipin, flush type
S&F in repair Switch socket combination 3 pin 16A, multi pin, flush type
S&F in repair switch piano flush type 15/16 amps single pole one way complete all as specified and directed.
S&F modular switch type 5/6 amps single pole one way complete all as specified and directed.
S&F Socket, 6A - 2/3 pin combined 2 module, white ivory finish modular type complete all as specified and directed.
S&F Socket, 6A/16A- 2/3 pin combined 2 module, white ivory finish modular type complete all as specified and directed.
S&F modular switch type 15/16 amps single pole one way complete all as specified and directed.
S & F Metal flush box 3 module complete all as specified and directed.
S & F Metal flush box 6 module complete all as specified and directed.
S & F Metal flush box 8 module complete all as specified and directed.
S & FWhite cover plate with frame, 3 module complete all as specified and directed.
S & FWhite cover plate with frame, 6 module complete all as specified and directed.
S & F White cover plate with frame, 8 module complete all as specified and directed.
S&F in repair Ceiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified and directed.
S & F in repair lamp holder, isolated body, with back plate suitable for batten/angle fittings complete all as specified and directed.
S & F deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed.
S & F Wall monted slim LED batten 20W, 4' long with extruded aluminium housing, with integrated LED driver complete all as specified and directed by Engr-in- charge.
S & F LED bldg security light fittings 35 Watt ,230 VAC outdoor type with high pressure die cast aluminium housing, heat resistant, toughned glass cover with IP66 protection complete all as spedified and as directed.
S & F Wall monted slim LED batten 10W, 2' long with extruded aluminium housing, with integrated LED driver complete all as specified and directed by Engr-in- charge.
S&f LED recessed mounted light (600×600)mm35/36 watt suitable for indoor space including provision of three core PVC cable of copper conductor of size 23/.0076 and making connection complete all as specified and directed.
Fixing only Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, TPN DB DD with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
Fixing only Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
Fixing only Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 double door, Tripple pole & neutral with 200 amps rated bus bar, IP-20 protection, complete all as specified and directed.
S&F MCB, Triple pole & neutral, 32 amps, 415 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
S&F MCB, Single pole & neutral 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
Supply and fixing MCCB 100 amps 4 pole adjustable thermal & fixed magmetic setting four pole 415 volt 50 Hz with breaking capacity 10 KA including taking down the old one complete all as specified and directed by Engr-in-Charge.
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge.
Taking down ceiling fan/exhaust fan sealing cable end, dismantling blades and removing fan and blades to store complete all as specified by Engr in charge
M & L for rewinding of coils of ceiling fans of sweep 1200/1400 mm of any make by using super enamelled copper wire as per existing gauge and approved quality including heat varnishing drying up overhauling and testing complete all as specified and as directed.
All as per item ser No 47.00 here-in -above but of exhaust fan of sweep 300mm to 380mm
Supply only parts /components of ceiling fan as per existing make and size complete all as specifed and as directed (Note : Parts and components supplied under this item shall be fixed under item No 56 here in before). (a) Gun metal bush metal bush of any size.
(b )Ball bearing . Make : NBC/ABC/SKF
(c) Paper condenser 2.5 MFD (Make: USHA/SHARITTA/KEITRON/UNIVERSAL
(d) Connector bakelite two terminal each end
(e) Rubber bush with MS bolt and nut
(f) PVC canopy for ceiling fan of Make: USHA/GEC/POLAR/HIMADRI/CROMPTON/KASSELS as applicable.
Supply only parts /components of exhaust fan as per existing make and size complete all as specifed and as directed (Note : Parts and components supplied under this item shall be fixed under item No 57 here in before). (a) Gun metal bush bearing
(b) Ball bearing (Make: NBC/SKF/ARC/ANT)
(c) Paper condenser 4 MFD (Make: USHA/SHARITTA/KEITRON/UNIVERSAL
(d) Set of exhaust fan blades with screws (Set of three blades) (Make: GEC/UNIVERSAL)
M & L in replacement for MS louvers with nuts, bolts and washers suitable to exhaust fan 300/450 mm sweep of any description make and model after taking down old existing unserviceable PVC MS louvers complete all as directed.
M&L in replacement for suitable frames of 300/450 mm sweep exhaust fan of any description make and model after taking down old existing unserviceable frames complete all as directed.
M & L in replacement for standard MS clamps with rubber shoe with bolts suitable to exhaust fan of any description, make and model after taking down old existing unserviceable clamps complete all as directed.
Supply fix in repairs blade set (set of three blades) 1200/1400 mm sweep as per existing make and size all as specified and directed.
Hanging only ceiling fan and connecting up including provision of flexible cable from ceiling rose or connector to fan complete all as specified and directed
M & L Sub main wiring casing caping type with two run single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly and drawing into rigid PVC casing caping of size 32 mm medium grade size, making good the disturbed surfaces complete including taking down old submain wiring.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.
SUDHANGSHU CHANDRA GHOSH
M/s Sohini Construction
Biswanath Sharma
ANUP ENGINEERING WORKS
M/S RATNESH KUMAR SINGH
Tirupati Construction
M/s. RAMPHAL GARG
M/S ASHOK ENTERPRISE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .